journal article·2025-05-07Open access

Preparation and Properties of Phase Change Energy Storage Composites Based on Modified Fly Ash

Chaoheng Li, Qingchun Yu, Yong Deng, Qixiang Su, Tianlie Xiao, Yifan Sun

Materials· Volume 18· Issue 9

Abstract

Fly ash (FA) is a porous solid waste produced by coal-fired power plants that can be used as a carrier for solid–liquid phase change materials (PCM). Due to the disadvantages of FA, including small adsorption capacity and poor thermal performance, its application range is limited. Therefore, FA modification methods have received increasing attention. Two modification methods were used to improve the adsorption capacity of FA. After the modification experiments, the surface structure of modified fly ash (MFA) was eroded, revealing a three-dimensional porous structure. The Al/Si mass ratio of the alkali-modified sample increased from 0.67 to 1.28, and the specific surface area and pore volume increased from 3.82 m2/g and 0.008 cm3/g to 40.86 m2/g and 0.026 cm3/g, respectively. The shape-stable phase change material (SSPCM) prepared using the hybrid sintering method of Al-12Si alloy and alkali-modified fly ash (MFA-OH) exhibits excellent thermal properties and thermal cycling stability. The results showed that the heat storage density and thermal conductivity of SSPCM increased with an increase in PCM content. The thermal conductivity and latent heat of phase change in the composite with the highest latent heat of phase change in the sample were 18.24 W/(m·K) and 124.10 J/g, respectively. The optimum loading rate for the alloy is 65 wt%. After 100 thermal cycles, the latent heat and thermal conductivity of the phase change at SSPCM were 93.3% and 94.6% of the initial values, respectively. The research findings provide a feasible process for FA as a phase change carrier, and the application scope is extended.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Heat and Mass Transfer in Porous Media

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Key Laboratory for Nonferrous Vacuum Metallurgy of Yunnan Province, Kunming University of Science and Technology, Kunming 650093, China

State Key Laboratory of Complex Non-Ferrous Metal Resources Clean Utilization, Kunming University of Science and Technology, Kunming 650093, China

National Engineering Research Center of Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, China

Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China

Funding

National Natural Science Foundation of China · Yunnan Province students’ innovation and entrepreneurship training program project

References (38)

Show source-provided references
1. Strojny, J., Krakowiak-Bal, A., Knaga, J., and Kacorzyk, P. (2023). Energy security: A conceptual overview. Energies, 16.10.3390/en16135042 ↗
2. Urban configurations of carbon neutrality: Insights from the Carbon Neutral Cities Alliance10.1177/2399654418784949 ↗
3. Phase change material-integrated latent heat storage systems for sustainable energy solutions10.1039/D1EE00527H ↗
4. Latent heat thermal energy storage systems with solid–liquid phase change materials: A review10.1002/adem.201700753 ↗
5. Yang, G., Yim, Y.J., Lee, J.W., Heo, Y.J., and Park, S.J. (2019). Carbon-filled organic phase-change materials for thermal energy storage: A review. Molecules, 24.10.3390/molecules24112055 ↗
6. Technology development and application prospects of organic-based phase change materials: An overview10.1016/j.rser.2022.112175 ↗
7. Experimental performance of avocado seed oil as a bio-based phase change material for refrigeration applications10.1016/j.ijrefrig.2024.10.006 ↗
8. Review on the development of high temperature phase change material composites for solar thermal energy storage10.1016/j.solmat.2019.110164 ↗
9. Flame retardant wood-based phase change materials with inorganic hydrated salt for thermal energy storage10.1016/j.indcrop.2025.120825 ↗
10. Molten salt/metal foam/graphene nanoparticle phase change composites for thermal energy storage10.1021/acsanm.0c00648 ↗
11. Investigation of thermal properties of Al–Cu eutectic alloy for phase change energy storage applications
12. Characteristics, Encapsulation Strategies, and Applications of Al and Its Alloy Phase Change Materials for Thermal Energy Storage: A Comprehensive Review10.1002/adfm.202412914 ↗
13. Thermal and cyclic performance of aluminum alloy composite phase change microcapsules for high-temperature thermal energy storage10.1016/j.solmat.2024.113128 ↗
14. Micro-and nano-encapsulated metal and alloy-based phase-change materials for thermal energy storage10.1039/D0NA01008A ↗
15. A novel effective thermal conductivity correlation of the PCM melting in spherical PCM encapsulation for the packed bed TES system10.1016/j.applthermaleng.2018.02.048 ↗
16. Preparation and thermal performance of a novel alloy microencapsulated phase change material (MEPCM)/ceramic composite10.1016/j.ijthermalsci.2022.107478 ↗
17. Preparation and formation mechanism of Al-Si/Al2O3 core-shell structured particles fabricated via steam corrosion10.1016/j.ceramint.2019.04.077 ↗
18. Microencapsulation of eutectic and hyper-eutectic Al-Si alloy as phase change materials for high-temperature thermal energy storage10.1016/j.solmat.2018.08.001 ↗
19. Review on shell materials used in the encapsulation of phase change materials for high temperature thermal energy storage10.1016/j.rser.2015.03.038 ↗
20. Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage10.1016/j.apenergy.2016.02.106 ↗
21. High-temperature alloy/honeycomb ceramic composite materials for solar thermal storage applications: Preparation and stability evaluation10.1016/j.ceramint.2016.12.119 ↗
22. Enhanced thermal performance of form-stable composite phase-change materials supported by novel porous carbon spheres for thermal energy storage10.1016/j.est.2019.101134 ↗
23. Thermal conductivity estimation of Carbon-Nanotube-dispersed phase change material as latent heat storage material10.1007/s10765-022-02996-0 ↗
24. State of the art review on physicochemical and engineering characteristics of fly ash and its applications10.1007/s40789-022-00472-6 ↗
25. Study on coal fly ash classified by bulk density10.1088/1742-6596/1732/1/012127 ↗
26. (2012). Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete (Standard No. ASTM C618-22).
27. A review of coal fly ash utilization to save the environment10.1007/s11270-023-06143-9 ↗
28. Surface area determination of porous materials using the Brunauer–Emmett–Teller (BET) method: Limitations and improvements10.1021/acs.jpcc.9b02116 ↗
29. Measuring thermophysical properties of building insulation materials using transient plane heat source method10.1016/j.enbuild.2021.110891 ↗
30. Preparation, characterization and sludge conditioning performance of modified coal fly ash10.1016/j.jtice.2017.05.020 ↗
31. Microstructure development of alkali-activated fly ash cement: A descriptive model10.1016/j.cemconres.2004.08.021 ↗
32. Hydrothermal synthesis of high-purity zeolite X from coal fly ash for heavy metal removal: Kinetic and isotherm analysis10.1016/j.apt.2023.104242 ↗
33. Enhancement of compressive strength and thermal shock resistance of fly ash-based geopolymer composites10.1016/j.conbuildmat.2016.06.037 ↗
34. Fabrication of porous ceramic composites with improved compressive strength from coal fly ash10.1179/1743676111Y.0000000011 ↗
35. Enabling superior thermo-mechanical performance of hydrated salt-based phase change energy storage cementitious composite using graphene oxide reinforced micro-interface10.1016/j.jobe.2023.107166 ↗
36. Compatibility study between aluminium alloys and alternative recycled ceramics for thermal energy storage applications10.1016/j.apenergy.2018.03.021 ↗
37. Preparation, properties characterization and structure formation mechanism of silica sand tailings-based ceramic materials10.1016/j.matchemphys.2020.123611 ↗
38. High thermal conductivity and high energy density compatible latent heat thermal energy storage enabled by porous AlN ceramics composites10.1016/j.ijheatmasstransfer.2021.121405 ↗