journal article·2021-02-03Open access

Compaction of Cohesive Granular Material: Application to Carbon Paste

Zahraa Kansoun, Hicham Chaouki, Donald Picard, Julien Lauzon-Gauthier, Houshang Alamdari, Mario Fafard

Materials· Volume 14· Issue 4

Abstract

Carbon-like materials such as the anode and the ramming paste play a crucial role in the efficiency of the Hall–Héroult process. The mechanical behavior of these materials during forming processes is complex and still ill-understood. This work aimed to investigate experimentally the mechanical behavior of a carbon paste used in the aluminum industry under different loading conditions. For this purpose, experiments consisting of (1) relaxation tests at different compaction levels, (2) quasi-static cyclic tests at several amplitudes, (3) monotonic compaction tests at varied strain rates, and (4) vibrocompaction tests at different frequencies were carried out. The obtained results highlight some fundamental aspects of the carbon paste behavior such as the strain rate’s effect on the paste compressibility, the hardening-softening behavior under cyclic loadings, the effect of cycling amplitude on the stress state and the paste densification, and the frequency effect on the vibrocompaction process. These results pave the way for the development of reliable rheological models for the modeling and the numerical simulation of carbon pastes forming processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Granular flow and fluidized beds · Composite Material Mechanics · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Water Engineering, NSERC/Alcoa Industrial Research Chair MACE3 and Aluminium Research Centre—REGAL, 1065 Avenue de la Medecine, Laval University, Québec, QC G1V 0A6, Canada

Eddify Technologies Company, 3425 Rue Pierre-Ardouin, Québec, QC G1P 0B3, Canada

Alcoa Corporation, Continuous Improvement Smelting Technology, 1 Boul. Des Sources, Deschambault-Grondines QC G0A 1S0, Canada

Department of Mining, Metallurgical and Materials Engineering, NSERC/Alcoa Industrial Research Chair MACE3 and Aluminium Research Centre—REGAL, 1065 Avenue de la Medecine, Laval University, Québec, QC G1V 0A6, Canada

Funding

Fonds de recherche du Québec – Nature et technologies · Alcoa · Natural Sciences and Engineering Research Council of Canada

References (31)

Show source-provided references
1. Thibeault, P., Mézin, H., and Martin, O. (2016). Rio Tinto AP44 cell technology development at alma smelter. Light Metals, Springer.10.1007/978-3-319-48251-4_49 ↗
2. Desrosiers, P., Robitaille, M., Voyer, P.L., Caetano, S., Gariepy, R., Martin, O., and Robert, P. (2017). The Successful Implementation of AP40 Technology at Kitimat. Light Metals, Springer.10.1007/978-3-319-51541-0_96 ↗
3. Whitfield, D., Akhmetov, S., Blasques, J., and Devadiga, H. (2017). Implementation of D18+ Cell Technology at EGA’s Jebel Ali Smelter. Light Metals, Springer.10.1007/978-3-319-51541-0_91 ↗
4. Grjotheim, K. (1982). Aluminium Electrolysis: Fundamentals of the Hall-Héroult Process, International Publishers Service, Incorporated.
5. Choate, W.T., and Green, J.A. (2003). US Energy Requirements for Aluminum Production: Historical Perspective, Theoretical Limits and New Opportunities.
6. Hulse, K.L., and Carbon, R. (2000). Anode Manufacture: Raw Materials, Formulation and Processing Parameters, R & D Carbon Limited.
7. Gates, D. (1992). Modelling and Simulation of a Vibroformer for Carbon Anodes Used in Aluminium Production, Comalco Research Center.
8. On modelling and the control of vibroformers in aluminium production10.1016/S0960-0779(97)00070-2 ↗
9. Sadler, B.A. (2016). Evolution of the thermo-mechanical properties of ramming paste from ambient to operating temperature in a Hall-Heroult cell. Light Metals, Springer.
10. Faaness, B.M., Gran, H., Sørlie, M., and Øye, H.A. (2016). Ramming paste related failures in cathode linings. Essential Readings in Light Metals, Springer.10.1007/978-3-319-48200-2_109 ↗
11. Compaction properties of carbon materials used for prebaked anodes in aluminum production plants10.1016/j.powtec.2013.06.025 ↗
12. Influence of coke particle characteristics on the compaction properties of carbon paste material10.1016/j.powtec.2014.02.053 ↗
13. Thibodeau, S. (2016). Caractérisation des Propriétés Mécaniques de la Pâte de Carbone à 150 C dans le but d’Optimiser la Mise en Forme des Anodes Utilisées dans les Cuves Hall-Héroult. [Ph.D. Thesis, Université Laval].
14. New insight on the restructuring and breakage of particles during uniaxial confined compression tests on aggregates of petroleum coke10.1016/j.powtec.2013.12.048 ↗
15. Chaouki, H., Thibodeau, S., Fafard, M., Ziegler, D., and Alamdari, H. (2019). Characterization of the Hot Anode Paste Compaction Process: A Computational and Experimental Study. Materials, 12.10.3390/ma12050800 ↗
16. Characterization and modelling of a carbon ramming mix used in high-temperature industry10.1016/j.ijsolstr.2010.11.024 ↗
17. Tkac, M. (2007). Porosity Development in Composite Carbon Materials during Heat Treatment. [Ph.D. Thesis, Norwegian University of Science and Technology].
18. Gao, S., Bao, C., Zhang, S., Wang, H., Woo, J., and Cutshall, E. (2016). Optimum vibration time for green anode production. Light Metals, Springer.10.1007/978-3-319-65136-1_190 ↗
19. Sandvik, E., Blindheim, R., and Bø, H.M. (2016). Vibration forming of carbon blocks, Essential Readings. Light Metals, Springer.10.1007/978-3-319-48200-2_45 ↗
20. Rebaïne, F. (2015). Étude de l’Influence des Paramètres de Vibro-Compaction sur les Propriétés Mécaniques des Anodes Crues en Carbone, Université du Québec à Chicoutimi.
21. Vincent, H., André, J.-F., and Pinoncely, A. (2007). XELIOS™, a vibrocompactor designed for producing high density anodes, TMS (The Minerals, Metals & Materials Society). Light Metals, Springer.
22. 2-DOF dynamic model of vibro-compactor used for the carbon anodes block production10.1016/j.cirpj.2016.09.003 ↗
23. Viscoplastic modeling of asphalt mixes with the effects of anisotropy, damage and aggregate characteristics10.1016/j.mechmat.2005.06.003 ↗
24. A viscoplastic constitutive model with strain rate variables for asphalt mixtures—Numerical simulation10.1016/j.commatsci.2006.03.013 ↗
25. Viscoplastic response and modeling of asphalt-aggregate mixes10.1617/s11527-008-9449-8 ↗
26. A modified viscoplastic model to predict the permanent deformation of asphaltic materials under cyclic-compression loading at high temperatures10.1016/j.ijplas.2012.03.001 ↗
27. Relaxation of hardening in asphalt concrete under cyclic compression loading10.1061/(ASCE)MT.1943-5533.0001814 ↗
28. Constitutive modeling of hardening-relaxation response of asphalt concrete in cyclic compressive loading10.1016/j.conbuildmat.2017.01.116 ↗
29. Sørlie, M., and Øye, H. (2010). Cathode in Aluminium Electrolysis, Aluminium-Verlag Marketing & Kommunikation GmbH.
30. Granular dynamics in compaction and stress relaxation
31. Mixing variable for prebaked anodes used in aluminium production10.1016/j.powtec.2012.10.043 ↗