journal article·2021-10-27Open access

Tribological Properties of Al-Based Composites Reinforced with Fullerene Soot

Firuz Yunusov, Tatiana V. Larionova, Oleg Tolochko, Alexander D. Breki

Materials· Volume 14· Issue 21

Abstract

Aluminum-based composite materials reinforced with fullerene soot, which is a mixture of fullerene and amorphous carbon, are promising materials for friction and wear applications. Composite materials: aluminum with 2% fullerene soot (f.s) and Al with 2% f.s and 2% Cu were obtained via mechanical milling followed by hot pressing. The tribological properties (friction and wear) of the listed composites were investigated and compared with the results for pure aluminum obtained under similar conditions. It has been shown that the addition of fullerene soot reduces the friction coefficient by 25%. At additional alloying with copper, the friction coefficient decreased by 35% in comparison with pure aluminum and also lad to a decrease in friction fluctuations. The wear rate of composite Al with 2% f.s decreased twice in comparison with that of pure aluminum, and with additional alloying it decreased 2.5 times. The morphology of the wear surfaces was investigated by scanning electron microscopy (SEM). The influence of fullerene soot and additional alloying on the wear mechanism was shown.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Machinery, Materials and Transport, Peter the Great St. Petersburg Polytechnic University, 195251 Saint-Petersburg, Russia

Funding

Russian Foundation for Basic Research

References (27)

Show source-provided references
1. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
2. Global energy consumption due to friction in trucks and buses10.1016/j.triboint.2014.05.004 ↗
3. Structure, strength and fracture of hot-pressed Al-Cr, Al-Cr-Si powder composites10.1063/1.4898994 ↗
4. Friction and wear behavior of Al–CNT composites10.1016/j.wear.2013.08.021 ↗
5. Micro/Nanostructure and Tribological Characteristics of Pressureless Sintered Carbon Nanotubes Reinforced Aluminium Matrix Composites10.1155/2016/9843019 ↗
6. Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes10.1016/j.wear.2012.10.006 ↗
7. Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh1510.1134/S207511331804007X ↗
8. Mechanical properties, wear behavior and crystallographic texture of Al–multiwalled carbon nanotube composites developed by powder metallurgy route10.1177/0021998316658946 ↗
9. Friction and wear behavior of alumina-based graphene and CNFs composites10.1016/j.jeurceramsoc.2017.02.024 ↗
10. Carbon nanomaterials in tribology10.1016/j.carbon.2017.04.027 ↗
11. Study of microstructure and interfaces in an aluminium C60 composite material10.1016/S1359-6454(03)00294-5 ↗
12. Self-Assembled network structures in Al/C60 composites10.1016/j.carbon.2010.06.013 ↗
13. Microstructure and mechanical properties of aluminum–fullerene composite fabricated by high pressure torsion10.1016/j.scriptamat.2007.12.010 ↗
14. Mechanical damping behavior of Al/C60-fullerene composites with supersaturated Al–C phases10.1016/j.compositesb.2015.03.006 ↗
15. Characterization of combustion fullerene soot, C60, and mixed fullerene10.1016/j.carbon.2004.01.076 ↗
16. Nanostructured Al/Al4C3 composites reinforced with graphite or fullerene and manufactured by mechanical milling and spark plasma sintering10.1016/j.matchemphys.2011.12.017 ↗
17. Tribological properties of hot-pressed alumina–CNT composites10.1016/S0043-1648(03)00216-3 ↗
18. Dry and lubricated wear resistance of mechanically- alloyed aluminum-base sintered composites10.1016/S0043-1648(00)00553-6 ↗
19. Fullerene Soot-Reinforced Al-Based Composites and Their Densification Via Copper Addition10.1007/s11665-020-05024-0 ↗
20. Luzhnov, Y.M. (2013). Fundomentals of Tribology, MADI. (In Russian).
21. Influence of adhesion on the sliding and rolling friction10.1016/0079-6816(94)90064-7 ↗
22. Deryagin, B.V., Krotova, N.A., and Smilga, V.P. (1973). Solids Adhesion, Nauka. (In Russian).
23. Kragelskiy, I.V. (1968). Friction and Wear, Mashinostroenie. (In Russian).
24. Kostetskiy, B.I. (1970). Friction, Lubrication and Wear in Machine, Technika. (In Russian).
25. Friction and wear characteristics of the carbon nanotube–aluminum composites with different manufacturing conditions10.1016/j.wear.2008.12.096 ↗
26. Wear behavior in Al 2024–CNTs composites synthesized by mechanical alloying
27. Gorkunov, D.N. (2001). Wear and Nonwear, MSKHA. (In Russian).