journal article·2023-02-05Open access

Phase Transformations Caused by Heat Treatment and High-Pressure Torsion in TiZrHfMoCrCo Alloy

Alena S. Gornakova, Boris B. Straumal, Alexander I. Tyurin, Natalia S. Afonikova, Alexander V. Druzhinin, Gregory S. Davdian, Askar R. Kilmametov

Materials· Volume 16· Issue 4

Abstract

In this work the high-entropy alloy studied contained six components, Ti/Zr/Hf/Mo/Cr/Co, and three phases, namely one phase with body-centered cubic lattice (BCC) and two Laves phases C14 and C15. A series of annealings in the temperature range from 600 to 1000 °C demonstrated not only a change in the microstructure of the TiZrHfMoCrCo alloy, but also the modification of phase composition. After annealing at 1000 °C the BCC phase almost fully disappeared. The annealing at 600 and 800 °C leads to the formation of new Laves phases. After high-pressure torsion (HPT) of the as-cast TiZrHfMoCrCo alloy, the grains become very small, the BCC phase prevails, and C14 Laves phase completely disappears. This state is similar to the state after annealing at high effective temperature Teff. The additional annealing at 1000 °C after HPT returns the phase composition back to the state similar to that of the as-cast alloy after annealing at 1000 °C. At 1000 °C the BCC phase completely wets the C15/C15 grain boundaries (GBs). At 600 and 800 °C the GB wetting is incomplete. The big spread of nanohardness and Young’s modulus for the BCC phase and (C15 + C14) Laves phases is observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Osipyan Institute of Solid State Physics of the Russian Academy of Sciences, Ac. Osipyan Str. 2, 142432 Chernogolovka, Russia

G.R. Derzhavin Research Institute “Nanotechnologies and Nanomaterials” TSU, Internazionalnaja Str. 30, 392000 Tambov, Russia

Funding

the Russian Ministry of Science and Higher Education

References (50)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys10.1016/j.msea.2010.07.049 ↗
4. On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
5. Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
6. Mechanism of radiation damage reduction in equiatomic multicomponent single phase alloys10.1103/PhysRevLett.116.135504 ↗
7. Dynamic substrate reactions during room temperature heavy ion irradiation of CoCrCuFeNi high entropy alloy thin films10.1038/s41529-022-00260-2 ↗
8. Effects of Au2+ irradiation induced damage in a high-entropy pyrochlore oxide single crystal10.1016/j.scriptamat.2022.114916 ↗
9. Design and fabrication of Ti–Zr-Hf-Cr-Mo and Ti–Zr-Hf-Co-Cr-Mo highentropy alloys as metallic biomaterials10.1016/j.msec.2019.110322 ↗
10. Wrought cobalt-chromium surgical implant alloys10.1007/BF00549560 ↗
11. Cast vs. wrought cobalt-chromium surgical implant alloys10.1002/jbm.820090205 ↗
12. Recommended heat treatment and alloy additions for cast Co-Cr surgical implants10.1002/jbm.820120613 ↗
13. Phase identification and incipient melting in a cast Co-Cr surgical implant alloy10.1002/jbm.820160109 ↗
14. Recent metallic materials for biomedical applications10.1007/s11661-002-0109-2 ↗
15. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
16. Design and development of metallic biomaterials with biological and mechanical biocompatibility10.1002/jbm.a.36667 ↗
17. Straumal, B.B., Klinger, L., Kuzmin, A., Lopez, G.A., Korneva, A., Straumal, A.B., Vershinin, N., and Gornakova, A.S. (2022). High entropy alloys coatings deposited by laser cladding: A review of grain boundary wetting phenomena. Coatings, 12.10.3390/coatings12030343 ↗
18. Straumal, B., Korneva, A., Kuzmin, A., Klinger, L., Lopez, G.A., Vershinin, N., Straumal, A., and Gornakova, A. (2022). High entropy alloys for energy conversion and storage: A review of grain boundary wetting phenomena. Energies, 15.10.3390/en15197130 ↗
19. Straumal, B., Rabkin, E., Lopez, G.A., Korneva, A., Kuzmin, A., Gornakova, A., Straumal, A., and Baretzky, B. (2021). Grain boundary wetting phenomena in high entropy alloys containing nitrides, carbides, borides, silicides, and hydrogen: A Review. Crystals, 11.10.3390/cryst11121540 ↗
20. Microstructure and properties of a refractory high-entropy alloy after cold working10.1016/j.jallcom.2015.07.209 ↗
21. Laser metal deposition of refractory high-entropy alloys for high-throughput synthesis and structure-property characterization10.1088/2631-7990/abcca8 ↗
22. Thermodynamic parameters, microstructure, and electrochemical properties of equiatomic TiMoVWCr and TiMoVNbZr high-entropy alloys prepared by vacuum arc remelting10.1016/j.ijrmhm.2021.105595 ↗
23. Fracture behavior of novel biomedical Ti-based high entropy alloys under impact loading10.1016/j.msea.2020.140456 ↗
24. Mechanical instability and tensile properties of TiZrHfNbTa high entropy alloy at cryogenic temperatures10.1016/j.actamat.2020.10.044 ↗
25. Further investigation of a novel high entropy alloy MoNbHfZrTi based solar absorber coating with double antireflective layers10.1016/j.solmat.2020.110709 ↗
26. Design of high-ductile medium entropy alloys for dental implants10.1016/j.msec.2020.110959 ↗
27. Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy10.1016/j.actamat.2019.11.001 ↗
28. Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys10.1038/s41598-020-70298-2 ↗
29. Research on nano-scratching behavior of TiZrHfBeCu(Ni) high entropy bulk metallic glasses10.1016/j.jallcom.2019.153240 ↗
30. Mechanistic origin of high strength in refractory BCC high entropy alloys up to 1900K10.1016/j.actamat.2019.10.015 ↗
31. High-temperature martensitic transformation of CuNiHfTiZr high- entropy alloys10.1038/s41598-019-55762-y ↗
32. Deformation and strength characteristics of Laves phases in titanium alloys10.1016/j.matdes.2019.107891 ↗
33. Deformation-driven formation of equilibrium phases in the Cu–Ni alloys10.1007/s10853-011-5805-0 ↗
34. Phase transitions in Cu-based alloys under high pressure torsion10.1016/j.jallcom.2016.12.057 ↗
35. High-pressure torsion driven phase transformations in Cu–Al–Ni shape memory alloys10.1016/j.actamat.2016.12.003 ↗
36. The origin and the effect of the fcc phase in sintered HfNbTaTiZr10.1016/j.matlet.2020.129224 ↗
37. Phase transformations induced by severe plastic deformation10.2320/matertrans.MF201938 ↗
38. High pressure torsion of Cu–Ag and Cu–Sn alloys: Limits for solubility and dissolution10.1016/j.actamat.2020.05.055 ↗
39. Phase transformations in the severely plastically deformed Zr–Nb alloys10.1016/j.matlet.2012.04.153 ↗
40. Competition for impurity atoms between defects and solid solution during high pressure torsion10.1016/j.scriptamat.2019.08.001 ↗
41. The formation of the ω phase in the titanium-iron system under shear deformation10.1134/S0021364020100033 ↗
42. Formation and growth of grain noundary (αTi) layers and their hardness in Ti–Cr Alloys10.1134/S1027451022060106 ↗
43. Defects in high entropy alloy HfNbTaTiZr prepared by high pressure torsion10.12693/APhysPolA.134.891 ↗
44. Evolution of microstructure and hardness in Hf25Nb25Ti25Zr25 high-entropy alloy during high-pressure torsion10.1016/j.jallcom.2019.02.220 ↗
45. Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties10.1016/j.actamat.2017.09.035 ↗
46. Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion10.1016/j.msea.2016.08.118 ↗
47. Thermal stability of a nanocrystalline HfNbTiZr multi-principal element alloy processed by high-pressure torsion10.1016/j.matchar.2020.110550 ↗
48. Phase transformation and microstructure evolution in ultrahard carbon-doped AlTiFeCoNi high-entropy alloy by high-pressure torsion10.1016/j.matlet.2021.130368 ↗
49. Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing10.1016/j.msea.2017.08.083 ↗
50. Synthesis of biocompatible high-entropy alloy TiNbZrTaHf by high-pressure torsion10.1016/j.msea.2021.141869 ↗