journal article·2024-03-21Open access

The Influence of an Unsupported Sleeper on the Vertical Bearing Characteristics of Heavy-Haul Railway Ballast

Dan Liu, Chengguang Su, Dawei Zhang, Caihao Lan

Materials· Volume 17· Issue 6

Abstract

In order to study the influence of an unsupported sleeper on the vertical bearing characteristics of heavy-haul railway ballast, a three-dimensional discrete element model (DEM) was established for a ballasted track, by removing ballast particles that come into contact with the bottom of the sleeper from the model to simulate the unsupported sleeper. Vertical bearing characteristics for ballast on different types of unsupported sleepers were studied. The results showed that an unsupported sleeper could reduce the bearing area of the ballast below the sleeper and reduce the number of ballast particles that were in contact. It could also lead to an increase in the maximum contact force between the particles, accelerating the deterioration of the particles (thus affecting the overall performance of the ballast) and reducing the vertical stiffness of the ballast. As the unsupported length and width increased, vertical stiffness gradually decreased. The vertical ballast stiffness for an unsupported sleeper was then used in a dynamic coupled vehicle/track model, and the effect of the unsupported sleeper on wheel/rail interaction was analyzed. Results showed that increasing the unsupported length and width leads to a decrease in the supporting force on the unsupported sleeper and to an increase in the supporting force on the adjacent sleepers.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Railway Engineering and Dynamics · Civil and Geotechnical Engineering Research · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Highway, Chang’an University, Xi’an 710064, China

China Railway First Survey and Design Institute Group Co., Ltd., Xi’an 710043, China

School of Automobile, Chang’an University, Xi’an 710064, China

MOE Key Laboratory of High-Speed Railway Engineering, Southwest Jiaotong University, Chengdu 610031, China

Funding

National Key Research and Development Program of China · National Natural Science Foundation of China · Natural Science Foundation of Shaanxi Province · Chinese Postdoctoral Science Foundation

References (30)

Show source-provided references
1. Lu, Z. (2002). Railway Track Structure and Maintenance, China Railway Publishing House.
2. Experimental Study on Resistance of Granular Ballast Bed under Periodic Longitudinal Load
3. Olsson, E.L., and Zack RIsson, P. (2002). Long-Term Measurement Results, Final Report, Banverket. Technical Report.
4. Influence of loose sleeper on track dynamics and bending fatigue of rail welds10.2219/rtriqr.40.80 ↗
5. Auguetin, S., Gudehus, G., Huber, G., and Schünemann, A. (2003). Numerical Model and Laboratory Tests on Settlement of Ballast Track, Springer.10.1007/978-3-540-45476-2_19 ↗
6. Evaluation of the influence factors on the ballast settlement by using the discrete element method
7. Investigation of free vibrations of voided concrete sleepers in railway track system10.1243/09544097JRRT141 ↗
8. Dynamic modeling of concrete railway sleepers10.1006/jsvi.1995.0564 ↗
9. Research on the Responses of Vertical Vibration of Train-Track System due to Voided Sleeper
10. Effect of Track Support Failure on Dynamic Response of Tangent Track
11. Effect of Unsupported Sleepers on Sleeper Dynamic Performance Response
12. Effect of disabled fastening systems and ballast on vehicle derailment10.1115/1.2424978 ↗
13. Effect of unsupported sleepers on wheel/rail normal load10.1016/j.soildyn.2007.08.006 ↗
14. Effect of Unsupported Sleepers on the Wheel/Rail Interaction of Heavy-Haul Railway lines
15. Influence of Unsupported Sleeper on Wheel-Rail Contact at Rail Weld Irregularity
16. Dynamic Evolution Process of Voided Sleeper
17. Influence of unsupported and partially supported sleepers on dynamic responses of train–track interaction10.1007/s12206-015-0521-3 ↗
18. Effects of train bogie patterns on the mechanical performance of ballasted railway tracks with unsupported sleepers10.1177/0954409716664932 ↗
19. DEM Analysis of Effect of Unsupported Sleepers on Dynamic Characteristics of Ballast Beds
20. Discrete element simulation and its validation on vibration and deformation of railway ballast
21. Discrete element modeling of ballast settlement under trains moving at “Critical Speeds”10.1016/j.conbuildmat.2012.09.007 ↗
22. Image-Aided Element Shape Generation Method in Discrete-Element Modeling for Railroad Ballast10.1061/(ASCE)MT.1943-5533.0000839 ↗
23. Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach10.1016/j.cma.2005.07.006 ↗
24. Effect of flakiness-elongation index on shear behavior of railway ballast
25. The effect of rail corrugation on dynamic characteristics of heavy haul railway ballast bed
26. (2008). Railway Ballast (Standard No. TB/T 2140-2008).
27. (2017). Code for Design of Heavy Haul Railway (Standard No. TB10625-2017).
28. (2017). Code for Design of Raiway Track (Standard No. TB 10082-2017).
29. Han, H. (2023). Research on under Ballast Mats: Mesoscopic Contact Behavior and Influence on Mechanical Properties of the Ballast Bed. [Master’s Thesis, China Academy of Railway Sciences Corporation Limited].
30. Lateral Hunting Stability of Railway Vehicles Running on Elastic Track Structures10.1115/1.4001908 ↗