article·2025-09-07Open access

Mechanical and Tribological Properties of Porous Cu-15Ni-8Sn Alloy Fabricated Through Selective Laser Melting for Application in Self-Lubricating Bearing

Hui Chen, Gengming Zhang, Jianling Liu, Shichao Liu

Abstract

Additive manufacturing techniques, such as selective laser melting (SLM), enable the production of intricate and integrated components made from metallic materials with inherent porosity. The pores, typically perceived as defects, are commonly observed on the surface or within the matrix of SLM-formed components. However, it is noteworthy that these pores can function as reservoirs for lubricants to enhance tribological performance in specific applications, such as porous bearings. In this study, the optimum conditions for fabricating Cu-15Ni-8Sn alloy porous bearings via SLM technology were investigated. By regulating laser power and hatch space during SLM processing, Cu-15Ni-8Sn alloy porous bearings were successfully obtained. The resulting oil bearings exhibited an oil content exceeding 18% and a radial crushing strength surpassing 370 MPa. At reduced laser power (80 W) and increased hatch spacing (0.9 mm), average friction coefficients of 0.1 and 0.13 were observed, with volumetric wear values of 10.3 mm3 and 96.7 mm3, respectively. The friction mechanism is a combination of abrasive wear and delamination wear.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Tribology and Lubrication Engineering · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.