Three-Dimensional (3D) Stereolithographic Tooth Replicas Accuracy Evaluation: In Vitro Pilot Study for Dental Auto-Transplant Surgical Procedures
Source abstract
Abstract
After immediate tooth extraction or after alveolar socket healing, tooth transplants are increasingly used for functional restoration of edentulous maxillary areas. Recent studies have shown the periodontal ligament (PDL) viability and the tooth housing time in the adapted neo-alveolus as key factors for transplantation success. During surgical time, 3D stereolithographic replicas are used for fitting test procedures. In this paper, the accuracy of 3D dental replicas, compared with the corresponding natural teeth, is assessed in surgical transplantation. Lamb skulls were selected and submitted to Cone Beam Computer Tomography (CBCT). Scanning information, converted into Standard Digital Imaging and Communications in Medicine (DICOM) and Standard Triangulation Language (STL), was sent to the Volux X-ray Centre for 3D replica printing. After the tooth extractions, all lambs’ incisors were measured with a digital caliber and compared with the 3D replicas. Volume and dimensional error values were evaluated. All replicas showed macroscopically smaller volume (45.54%). Root replicas showed higher variations compared with the crown areas, with several unreplicated apical root areas. The cement–enamel junction tooth area was replicated quite faithfully, and the base area relative error showed 9.8% mean value. Even further studies with a larger number of replicas are needed. Data obtained confirmed high volumes of macroscopic discrepancies with several unreproduced apical root sites. The achieved accuracy (90.2%) confirmed that the 3D replicas cannot be used to reduce the surgical time during transplantation predictable procedures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Dental Trauma and Treatments · Dental Implant Techniques and Outcomes · Dental materials and restorations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Clinical and Experimental Medicine, University of Foggia, 71100 Foggia, Italy
Independent Researcher, 71100 Foggia, Italy
Independent Researcher, 76125 Trani, Italy
Department of Civil Engineering, Architecture and Environment, University of L’Aquila, 67100 L’Aquila, Italy
References (47)
Show source-provided references
1. Autotransplantation of teeth using computer-aided rapid prototyping of a three-dimensional replica of the donor tooth: A systematic literature review10.1016/j.ijom.2017.04.008 ↗
2. A Review of 3D Printing in Dentistry: Technologies, Affecting Factors, and Applications10.1155/2021/9950131 ↗
3. Clinical evaluations of cast gold alloy, machinable zirconia, and semiprecious alloy crowns: A multicenter study10.1016/j.prosdent.2015.10.018 ↗
4. A long-term study of 370 auto transplanted premolars. Part III. Periodontal healing subsequent to transplantation10.1093/ejo/12.1.25 ↗
5. Long-Term Evaluation of Autotransplanted Maxillary Canines with Completed Root Formation10.3109/00016358309162300 ↗
6. International Association of Dental Traumatology guidelines for the management of traumatic dental injuries: 2. Avulsion of permanent teeth
7. Autotransplantation of third molars: A literature review and preliminary protocols10.1038/s41415-020-1264-9 ↗
8. Accuracy of Computer-Assisted Template-Guided Autotransplantation of Teeth with Custom Three-Dimensional Designed/Printed Surgical Tooling: A Cadaveric Study10.1016/j.joms.2016.12.049 ↗
9. Autotransplantation of teeth: Requirements for predictable success10.1034/j.1600-9657.2002.00118.x ↗
10. Autotransplantation of Premolars With a 3-Dimensional Printed Titanium Replica of the Donor Tooth Functioning as a Surgical Guide: Proof of Concept10.1016/j.joms.2016.01.030 ↗
11. Preliminary experience with medical applications of rapid prototyping by selective laser sintering10.1016/S1350-4533(96)00039-2 ↗
12. Accuracy assessment of 3D-printed tooth replicas
13. Accuracy of three-dimensional dental resin models created by fused deposition modeling, stereolithography, and Polyjet prototype technologies: A comparative study10.2319/071117-460.1 ↗
14. Dimensional accuracy and surface characteristics of 3D-printed dental casts10.1016/j.prosdent.2020.07.008 ↗
15. Autogenous transplantation of teeth with complete root formation: Two case reports10.1111/j.1365-2591.2006.01170.x ↗
16. Autotransplantation of Immature Third Molars Using a Computer-aided Rapid Prototyping Model: A Report of 4 Cases10.1016/j.joen.2013.06.026 ↗
17. Minimizing the extra-oral time in autogeneous tooth transplantation: Use of computer-aided rapid prototyping (CARP) as a duplicate model tooth10.5395/rde.2012.37.3.136 ↗
18. Computer-aided planning and surgical guiding system fabrication in premolar autotransplantation: A 12-month follow up
19. The Accuracy of Stereolithography in Planning Craniofacial Bone Replacement10.1097/00001665-200303000-00006 ↗
20. Reproducibility of three-dimensional CT-assisted model production in the maxillofacial area10.1016/0266-4356(92)90265-K ↗
21. Autogenous transplants10.1016/0030-4220(56)90176-1 ↗
22. Autogenous Transplantation of Maxillary and Mandibular Molars10.1016/j.joms.2008.06.039 ↗
23. Pecci Lloret, M.P., Martínez, E.P., Rodríguez Lozano, F.J., Pecci Lloret, M.R., Guerrero Gironés, J., Riccitiello, F., and Spagnuolo, G. (2021). Influencing Factors in Autotransplantation of Teeth with Open Apex: A Review of the Literature. Appl. Sci., 11.10.3390/app11094037 ↗
24. A long-term study of 370 autotransplanted premolars. Part II. Tooth survival and pulp healing subsequent to transplantation10.1093/ejo/12.1.14 ↗
25. Autotransplantation of premolars: Does surgeon experience matter?10.1016/j.ijom.2018.08.003 ↗
26. Wu, Y., Chen, J., Xie, F., Liu, H., Niu, G., and Zhou, L. (2019). Autotransplantation of mature impacted tooth to a fresh molar socket using a 3D replica and guided bone regeneration: Two years retrospective case series. BMC Oral Health, 19.10.1186/s12903-019-0945-8 ↗
27. Outcome of tooth transplantation: Survival and success rates 17–41 years posttreatment10.1067/mod.2002.119979 ↗
28. Autotransplantation of premolars to premolar sites. A long-term follow-up study of 40 consecutive patients10.1016/j.ajodo.2003.12.002 ↗
29. Long term survival of mature autotransplanted teeth: A retrospective single center analysis10.1016/j.jdent.2020.103371 ↗
30. Outcomes and prognostic factors that influence the success of tooth autotransplantation in children and adolescents10.1111/edt.12353 ↗
31. Tang, H., Shen, Z., Hou, M., and Wu, L. (2017). Autotransplantation of mature and immature third molars in 23 Chinese patients: A clinical and radiological follow-up study. BMC Oral Health, 17.10.1186/s12903-017-0468-0 ↗
32. Survival rate of autotransplanted teeth after 5 years—A retrospective cohort study10.1016/j.jcms.2017.03.023 ↗
33. Importance of root development in autotransplantations: A retrospective study of 137 teeth with a follow-up period varying from 1 week to 14 years10.1093/ejo/cjs112 ↗
34. A retrospective analysis of factors influencing the success of autotransplanted posterior teeth10.1186/s40510-015-0112-y ↗
35. Use of CBCT Guidance for Tooth Autotransplantation in Children10.1177/0022034519828701 ↗
36. Evaluation of the prognosis and causes of failure in 182 cases of autogenous tooth transplantation10.1016/j.tripleo.2004.09.007 ↗
37. Vinci, R., Manacorda, M., Abundo, R., Lucchina, A.G., Scarano, A., Crocetta, C., Lo Muzio, L., Gherlone, E.F., and Mastrangelo, F. (2020). Accuracy of Edentulous Computer-Aided Implant Surgery as Compared to Virtual Planning: A Retrospective Multicenter Study. J. Clin. Med., 9.10.3390/jcm9030774 ↗
38. Accuracy of stereolithographic models of human anatomy10.1111/j.1440-1673.1994.tb00146.x ↗
39. Hada, T., Kanazawa, M., Iwaki, M., Arakida, T., Soeda, Y., Katheng, A., Otake, R., and Minakuchi, S. (2020). Effect of Printing Direction on the Accuracy of 3D-Printed Dentures Using Stereolithography Technology. Materials, 13.10.3390/ma13153405 ↗
40. Kim, Y.H., Jung, B.Y., Han, S.S., and Woo, C.W. (2020). Accuracy evaluation of 3D printed interim prosthesis fabrication using a CBCT scanning based digital model. PLoS ONE, 15.10.1371/journal.pone.0240508 ↗
41. Polymers for 3D Printing and Customized Additive Manufacturing10.1021/acs.chemrev.7b00074 ↗
42. Effects of printing conditions on the molecular alignment of three-dimensionally printed polymer10.1016/j.compositesb.2017.09.067 ↗
43. Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method10.1016/j.matdes.2009.04.030 ↗
44. Controlling Parameters for Polymer Melting and Extrusion in FDM10.4028/www.scientific.net/KEM.259-260.667 ↗
45. Optimum part deposition orientation in fused deposition modeling10.1016/j.ijmachtools.2003.12.004 ↗
46. Biron, M. (2014). Material Selection of Thermoplastic. Practical and Advanced Information for Plastic Engineers, Elsevier.
47. National Center for Biotechnology Information (2021, December 09). PubChem Substance Record for SID 134996936, 14GUK8I73Z, Available online: https://pubchem.ncbi.nlm.nih.gov/substance/134996936.