journal article·2022-12-28Open access

Effect of CO2 on the Desulfurization of Sintering Flue Gas with Hydrated Lime

Jianguo Hong, Xinqing Zou, Ziqiang Qin, Bin Zhou, Shuhua Geng, Yuwen Zhang, Xingli Zou, Xionggang Lu

Materials· Volume 16· Issue 1

Abstract

The effect of carbon dioxide (CO2) on the desulfurization of sintering flue gas with hydrate (Ca(OH)2) as an absorbent was investigated, and the formation of calcium carbonate (CaCO3) and its effect on the desulfurization was discussed. The competitive relationship between carbon dioxide (CO2) and sulfur dioxide (SO2) with the deacidification agent in sintering flue gas is discussed thermodynamically, showing that sulfates are more likely to be generated under high oxygen potential conditions and that SO2 reacts more preferentially than CO2 under a thermodynamic standard state. The amount of produced CaCO3 increases under the condition that the CO2 concentration is absolutely dominant to SO2 in the sintering flue gas atmosphere. The effect of temperature, humidity and CO2 concentration on the desulfurization of Ca(OH)2 are discussed experimentally. The increasing temperature is not conducive to desulfurization, and the humidity can promote desulfurization, while excessive humidity could inhibit desulfurization. The suitable relative humidity is 20%. In situ generated calcium carbonate has a certain desulfurization effect, but the desulfurization effect is not as good as Ca(OH)2. However, a large proportion of CaCO3 was produced in the desulfurization ash under the condition that CO2 concentration was absolutely dominant to SO2 in the sintering flue gas atmosphere.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Industrial Gas Emission Control · Catalytic Processes in Materials Science · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Advanced Special Steel & Shanghai Key Laboratory of Advanced Ferrometallurgy & School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China

Ironmaking Plant, Shanghai Meishan Iron and Steel Co., Ltd., Nanjing 210039, China

Funding

China Bao-Wu Iron and Steel Group Co., Ltd. · National Natural Science Foundation of China · Shanghai Rising-Star Program · Program for Professor of Special Appointment at Shanghai Institutions of Higher Learning

References (28)

Show source-provided references
1. Emission Characteristics of Multiple Pollutants from Iron- Steel Sintering Flue Gas and Review of Control Technologies
2. Research Progress of the Effects of Ca-Based Sorbents on the NO_x Reaction in Circulating Fluidized Bed Boilers
3. An Advanced Wet Method for Simultaneous Removal of SO2 and NO from Coal-Fired Flue Gas by Utilizing a Complex Absorbent10.1016/j.cej.2016.08.103 ↗
4. Research Status and Progress of Wet Flue Gas Desulfurization Technology
5. A Method for Measuring the Reactivity of Absorbents for Wet Flue Gas Desulfurization10.1016/0009-2509(93)85003-8 ↗
6. Imidazolium-Based Ionic Liquids for Extraction of Sulfur Compounds from Real Heavy Crude Oil10.1007/s42250-022-00447-9 ↗
7. Choline Chloride-Based Deep Eutectic Solvents for Ultrasonic-Assisted Oxidative Desulfurization of Actual Heavy Crude Oil10.1016/j.cherd.2022.03.047 ↗
8. Removal of Sulfur Compounds from Real Diesel Fuel Employing the Encapsulated Mesoporous Material Adsorbent Co/MCM-41 in a Fixed-Bed Column10.1016/j.micromeso.2022.112020 ↗
9. Summary of Research Progress on Industrial Flue Gas Desulfurization Technology10.1016/j.seppur.2021.119849 ↗
10. Research Progress of Common Metal Oxides for Flue Gas Desulfurization10.1016/j.cep.2017.10.005 ↗
11. O3 Oxidation Combined with Semi-Dry Method for Simultaneous Desulfurization and Denitrification of Sintering/Pelletizing Flue Gas10.1016/j.jes.2020.11.021 ↗
12. Active Sites Assembly Effect on CeO2-WO3-TiO2 Catalysts for Selective Catalytic Reduction of NO with NH310.1016/j.mcat.2019.110549 ↗
13. Kinetic Model and Simulation of Promoted Selective Non-Catalytic Reduction by Sodium Carbonate10.1016/S1004-9541(07)60117-7 ↗
14. Effects of Concentration and Adsorption Product on the Adsorption of SO2 and NO on Activated Carbon10.1021/ef3016975 ↗
15. Simultaneous Removal of SO2 and NO Using a Novel Method with Red Mud as Absorbent Combined with O3 Oxidation10.1016/j.jhazmat.2020.122270 ↗
16. Characteristics of O3 Oxidation for Simultaneous Desulfurization and Denitration with Limestone–Gypsum Wet Scrubbing: Application in a Carbon Black Drying Kiln Furnace10.1021/acs.energyfuels.5b02717 ↗
17. A Surface Coverage Model for the Reaction of Ca(OH)2 with SO2 at Low Temperatures
18. Characteristics and Reactivities of Ca(OH)2/Silica Fume Sorbents for Low-Temperature Flue Gas Desulfurization10.1016/S0009-2509(03)00222-7 ↗
19. Influence between Desulfurization and Defluorination Reactions Using Ca(OH)2 in the Simulated Coal-Briquettes10.3775/jie.98.44 ↗
20. Structural Properties and Reactivities of Ca(OH)2/Fly Ash Sorbents for Flue Gas Desulfurization10.1021/ie020289o ↗
21. Study of Sorbents Prepared from Clays and CaO or Ca(OH)2 for SO2 Removal at Low Temperature10.1021/ie060126q ↗
22. Study on the Effect of CO2 on the Consumption of Desulfurizing Agent Ca(OH)2 in Flue Gas Desulfurization10.1021/ie901401j ↗
23. Ca-Based Sorbents Modified with Humic Acid for Flue Gas Desulfurization10.1021/ie051253+ ↗
24. Ultrafast Calcination and Sintering of Ca(OH)2 Powder: Experimental and Modeling10.1016/0009-2509(95)00043-5 ↗
25. Microstructure Evolution of Procedural Products during Limestone Simultaneous Calcination/Sulfation
26. Sulfation Phenomena in Fluidized Bed Combustion Systems10.1016/S0360-1285(00)00021-6 ↗
27. A Realistic Approach to Modeling an In-Duct Desulfurization Process Based on an Experimental Pilot Plant Study10.1016/j.cej.2008.01.032 ↗
28. Effect of Relative Humidity on Dry Flue Gas Desulfurization by Calcium-Based Desulfurizer