Tribo-Electrochemical Mechanism of Material Removal Examined for Chemical Mechanical Planarization of Stainless-Steel Using Citrate Buffer as a Complexing Agent
Source abstract
Abstract
Chemical mechanical planarization (CMP) is a technique used to efficiently prepare defect-free, flat surfaces of stainless steel (SS) foils and sheets that are implemented in various modern devices. CMP uses (electro)chemical reactions to structurally weaken the surface layers of a workpiece for easy removal by low-pressure mechanical abrasion. Using a model CMP system of 316/316L stainless steel (SS) in an acidic (pH = 3.63) slurry with alumina abrasives, citrate buffer (CB), and H2O2, we examine the tribo-electrochemical mechanisms of SS CMP that dictate the designs of functionally efficient and cost-effective CMP slurries. The use of CB as a pH-controlled complexing agent prevents defect-causing dissolution of SS and eliminates the need for using separate (often toxic) corrosion inhibitors in the slurry. A material removal rate of 8.6 nm min−1 is obtained at a moderate down pressure of 0.014 MPa with a platen rotation speed of 95 RPM. Electrochemical techniques are strategically combined with mechanical abrasion of SS test samples to probe complex CMP mechanisms that are not readily accessible with electrochemical experiments alone. Corrosion-like reactions of salt-film formation at the SS surface act to enable the CMP process, where corrosion-induced wear plays a major role in material removal.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Physics, Clarkson University, Potsdam, NY 13699-5820, USA
References (100+)
Show source-provided references
1. Approaches to flexible CIGS thin-film solar cells10.1016/j.tsf.2004.11.063 ↗
2. Hack, M., Hewitt, R., Brown, J.J., Choi, J.W., Cheon, J.H., Kim, S.H., and Jang, J. (2007). P-11: Analysis of Low Power Consumption AMOLED Displays on Flexible Stainless Steel Substrates. SID Symposium Digest of Technical Papers, Blackwell Publishing Ltd.10.1889/1.2785266 ↗
3. Mirshojaeian Hosseini, M.J., and Nawrocki, R.A. (2021). A review of the progress of thin-film transistors and their technologies for flexible electronics. Micromachines, 12.10.3390/mi12060655 ↗
4. Stainless steel sheets as the substrate of disposable electrochemical sensors for analysis of heavy metals or biomolecules10.1016/j.aca.2020.05.018 ↗
5. Chemical Mechanical Polishing of Stainless Steel as Solar Cell Substrate10.1149/2.0171505jss ↗
6. Chemical mechanical polishing of stainless steel foil as flexible substrate10.1016/j.apsusc.2012.02.100 ↗
7. Chemical mechanical polishing process parameters of 304 stainless steel
8. Su, J.X., Chen, J.P., Li, Q., and Qin, H.Q. (2016). Study on slurry of chemical mechanical polishing 304 stainless steel based on ferric chloride and oxalic acid. Materials Science Forum, Trans Tech Publications Ltd.10.4028/www.scientific.net/MSF.861.102 ↗
9. Selection on Surfactant in Polishing Slurry for Chemical Mechanical Polishing 304 Stainless Steel10.4028/www.scientific.net/KEM.866.125 ↗
10. Tribo-electrochemical study of stainless steel surfaces during chemical–mechanical polishing10.1002/ls.1336 ↗
11. Rokosz, K., Solecki, G., Mori, G., Fluch, R., Kapp, M., and Lahtinen, J. (2020). Effect of polishing on electrochemical behavior and passive layer composition of different stainless steels. Materials, 13.10.3390/ma13153402 ↗
12. Electrochemical analysis of the slurry composition for chemical mechanical polishing of flexible stainless-steel substrates10.3103/S1068366617060083 ↗
13. Two-step chemical mechanical polishing of stainless steel10.1149/2162-8777/ac5eae ↗
14. Investigation on S-136 steel surface planarization by chemical mechanical polishing10.1016/j.mee.2015.01.043 ↗
15. Chemical mechanical polishing of steel substrate using colloidal silica-based slurries10.1016/j.apsusc.2015.01.016 ↗
16. A novel process of chemical mechanical polishing for FV520B steel10.1016/j.jmapro.2020.09.052 ↗
17. Su, J.X., Peng, Y.A., Liu, Z.H., Wang, Z.K., and Fu, S.F. (2017). Analysis on the action of oxidant in chemical mechanical polishing of 304 ultra-thin stainless steel. Materials Science Forum, Trans Tech Publications Ltd.10.4028/www.scientific.net/MSF.893.234 ↗
18. Kim, T., and Lee, H. (2020). Preliminary study on fluidized bed chemical mechanical polishing (FB-CMP) process for stainless steel 304 (SS304). Micromachines, 11.10.3390/mi11070705 ↗
19. Weng, J., Lin, R., and Rong, X. (2020). Study on polishing slurry of hydrogen peroxide-oxalic acid in CMP 304 stainless steel. MATEC Web of Conferences, EDP Sciences.10.1051/matecconf/202032702002 ↗
20. Synergistic effect of oxidation and complexation on the material removal of pure iron at the nanoscale10.1016/j.wear.2023.204771 ↗
21. Electrochemical investigation of the surface-modifying roles of guanidine carbonate in chemical mechanical planarization of tantalum10.1016/j.matchemphys.2011.05.079 ↗
22. Stojadinović, J., Bouvet, D., and Mischler, S. (2016). Prediction of removal rates in chemical–mechanical polishing (CMP) using tribocorrosion modeling. J. Bio-Tribo-Corros., 2.10.1007/s40735-016-0041-4 ↗
23. Landolt, D., and Mischler, S. (2011). Chemical-mechanical polishing (CMP): A controlled tribocorrosion process. Tribocorrosion of Passive Metals and Coatings, Elsevier.10.1533/9780857093738 ↗
24. Tribocorrosion study of copper during chemical mechanical polishing in potassium periodate-based slurry10.1007/s11249-015-0474-9 ↗
25. Electrochemical study on metal corrosion in chemical mechanical planarization process10.7567/JJAP.56.07KA01 ↗
26. Gamagedara, K., and Roy, D. (2024). Experimental Strategies for Studying Tribo-Electrochemical Aspects of Chemical–Mechanical Planarization. Lubricants, 12.10.3390/lubricants12020063 ↗
27. Peng, W., Gao, Y., Jiang, L., Liu, J., and Qian, L. (2022). Attaining ultra-smooth 18CrNiMo7-6 case hardening steel surfaces with chemical mechanical polishing. Lubricants, 10.10.3390/lubricants10090199 ↗
28. Stability of dye solar cells with photoelectrode on metal substrates10.1149/1.3374645 ↗
29. A fundamental approach to electrochemical analyses on chemically modified thin films for barrier CMP optimization10.1149/2.0181905jss ↗
30. Chemical mechanical planarization for microelectronics applications10.1016/j.mser.2004.06.002 ↗
31. Exploring the role of− NH 2 functional groups of ethylenediamine in chemical mechanical polishing of GCr15 bearing steel10.1007/s40544-020-0460-6 ↗
32. Electrochemical mechanical polishing of flexible stainless steel substrate for thin-film solar cells10.1016/S1452-3981(23)14813-9 ↗
33. Electrochemical techniques for studying tribocorrosion processes10.1016/S0043-1648(03)00556-8 ↗
34. Role of green chemistry in sustainable corrosion inhibition: A review on recent developments
35. Green chemistry for stainless steel corrosion resistance: Life cycle assessment of citric acid versus nitric acid passivation
36. Citric acid—A dispersant for aqueous alumina suspensions10.1111/j.1151-2916.1996.tb08006.x ↗
37. Hydrogen peroxide driven biocatalysis10.1039/C9GC00633H ↗
38. Probing the Mechanisms of Metal CMP Using Tribo-Electroanalytical Measurements: Results for a Copper/Malonate System10.1149/2162-8777/abe7a7 ↗
39. An Alkaline Slurry Design for Co-Cu CMP Systems Evaluated in the Tribo-Electrochemical Approach10.1149/2.0091802jss ↗
40. Gamagedara, K., and Roy, D. (2024). Mechanisms of Chemically Promoted Material Removal Examined for Molybdenum and Copper CMP in Weakly Alkaline Citrate-Based Slurries. Materials, 17.10.3390/ma17194905 ↗
41. A Nonlinear Least Squares Fit procedure for analysis of immittance data of electrochemical systems10.1016/0167-2738(86)90031-7 ↗
42. Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of copper10.1149/1.2717410 ↗
43. Scratch formation and its mechanism in chemical mechanical planarization (CMP)10.1007/s40544-013-0026-y ↗
44. Zou, C., Pan, G., Gong, H., Xu, L., and Zhou, Y. (2016, January 15–16). Analusis of Scratches Generated on GAN Substrates during polishing. Proceedings of the 2016 STLE Annual Meeting, Las Vegas, NV, USA.
45. Effect of grain size on tungsten material removal rate during chemical mechanical planarization process10.1016/j.mssp.2024.108618 ↗
46. An overview of corrosion–wear interaction for planarizing metallic thin films10.1016/S0043-1648(03)00225-4 ↗
47. Chemically enhanced synergistic wear: A copper chemical mechanical polishing case study10.1016/j.wear.2013.08.001 ↗
48. Chemical-mechanical polishing for fabricating patterned W metal features as chip interconnects10.1149/1.2085434 ↗
49. Surface-complex films of guanidine on tantalum nitride electrochemically characterized for applications in chemical mechanical planarization10.1016/j.tsf.2011.12.005 ↗
50. Passivation Kinetics of 1, 2, 4-Triazole in Copper Chemical Mechanical Polishing10.1149/2.0171605jss ↗
51. A wafer-scale material removal rate profile model for copper chemical mechanical planarization10.1016/j.ijmachtools.2011.01.007 ↗
52. Interplay between solution chemistry and mechanical activation in friction-induced material removal of silicon surface in aqueous solution10.1016/j.triboint.2020.106319 ↗
53. Ilie, F., Minea, I.-L., Cotici, C.D., and Hristache, A.-F. (2023). The Effects of Friction and Temperature in the Chemical–Mechanical Planarization Process. Materials, 16.10.3390/ma16072550 ↗
54. Effect of applied stress on corrosion and mechanical properties of mild steel10.1061/(ASCE)MT.1943-5533.0002594 ↗
55. Virtanen, S. (2009). Electrochemical theory|corrosion. Encyclopedia of Electrochemical Power Sources, Elsevier Science.10.1016/B978-044452745-5.00026-5 ↗
56. Galvanodynamic probing of tribologically assisted material removal under chemical control: A cobalt/copper case study for application in chemical mechanical planarization10.1016/j.triboint.2022.108185 ↗
57. Metal-oxide interfaces10.1016/0927-796X(95)80001-8 ↗
58. Metastability at Defective Metal Oxide Interfaces and Nanoconfined Structures10.1002/admi.201902090 ↗
59. Corrosion fatigue mechanisms and evaluation methods of high-strength steel wires: A state-of-the-art review10.1111/ffe.14311 ↗
60. Material Removal Mechanism during Copper Chemical Mechanical Planarization Based on Nano-Scale Material Behavior10.1149/2.0071705jss ↗
61. Pourbaix diagrams as a simple route to first principles corrosion simulation10.1149/2.0111911jes ↗
62. Revised Pourbaix diagrams for nickel at 25–300 C10.1016/S0010-938X(97)00002-4 ↗
63. Revised pourbaix diagrams for chromium at 25–300 C10.1016/S0010-938X(97)89244-X ↗
64. Molybdenum, molybdenum oxides, and their electrochemistry10.1002/cssc.201100660 ↗
65. Simplified procedure for constructing Pourbaix diagrams10.5006/0010-9312-23.12.371 ↗
66. Revised pourbaix diagrams for iron at 25–300 C10.1016/S0010-938X(96)00067-4 ↗
67. Revised pourbaix diagrams for zinc at 25–300 C10.1016/S0010-938X(97)89246-3 ↗
68. Effect of Hydrogen Peroxide on Oxidation of Copper in CMP Slurries Containing Glycine10.1149/1.1615611 ↗
69. Occurrence of salt films during initiation and growth of corrosion pits10.1149/1.2128772 ↗
70. Localized corrosion: Passive film breakdown vs. pit growth stability: Part IV. The role of salt film in pit growth: A mathematical framework10.1149/2.0211906jes ↗
71. Anodic dissolution of iron in acidic sulfate electrolytes: I. Formation and growth of a porous salt film10.1149/1.2108541 ↗
72. Repassivation underneath salt film on stainless steel pits10.1016/j.corsci.2022.110353 ↗
73. A study of the solid salt film on nickel and stainless steel10.1016/0013-4686(87)87050-0 ↗
74. Cryo-based structural characterization and growth model of salt film on metal10.1016/j.corsci.2020.108812 ↗
75. On the critical factors for estimating the pit stability product under a salt film10.1149/1945-7111/ac0aab ↗
76. The behavior of resistive layers in the localized corrosion of stainless steel10.1149/1.2403283 ↗
77. Characterisation of salt films on dissolving metal surfaces in artificial corrosion pits via in situ synchrotron X-ray diffraction10.1016/j.elecom.2008.03.018 ↗
78. Polarographic investigation of oxalate, citrate and tartrate complexes of ferric and ferrous iron10.1021/ja01216a002 ↗
79. pH-specific synthesis and spectroscopic, structural, and magnetic studies of a chromium (III)− citrate Species. Aqueous solution speciation of the binary chromium (III)− citrate system10.1021/ic061480j ↗
80. Complex formation of nickel (II) ions with citric acid in aqueous solution: A potentiometric and spectroscopic study10.1071/CH9801685 ↗
81. A comparison of release rates of Cr, Ni, and Fe from stainless steel alloys and the pure metals exposed to simulated rain events10.1149/1.1834901 ↗
82. In situ study of salt film stability in simulated pits of nickel by Raman and electrochemical impedance spectroscopies10.1149/1.1838173 ↗
83. Electrochemical impedance spectroscopy investigation of alloy inconel 718 in molten salts at high temperature10.1016/S1452-3981(23)15005-X ↗
84. Electromechanical-Impedance-Spectroscopy Study of Corrosion of Fe and Ni with Molten ZnCl2-KCl Coating in Air at 673K10.1515/HTMP.2009.28.4.233 ↗
85. Electrochemical study of the dissolution of oxide films grown on type 316L stainless steel in molten fluoride salt10.1016/j.corsci.2021.109457 ↗
86. Measurements of Double-Layer Capacitance at the Preoxidized Ni/Fused Na2 SO 4 Interface10.1149/1.2085972 ↗
87. Electrochemical-Impedance-Spectroscopy study of corrosion of the alloy NF616 with molten ZnCl2-KCl coating in air at 673 K10.1515/htmp.2011.009 ↗
88. Pad porosity, compressibility and slurry delivery effects in chemical-mechanical planarization: Modeling and experiments10.1016/S0040-6090(00)00748-3 ↗
89. Tribo-electrochemical characterization of Ru, Ta and Cu CMP systems using percarbonate based solutions10.1149/2.0101511jss ↗
90. Polishing pad surface characterisation in chemical mechanical planarisation10.1016/j.jmatprotec.2004.04.094 ↗
91. Experimental considerations for using electrochemical impedance spectroscopy to study chemical mechanical planarization systems10.1016/j.electacta.2016.12.062 ↗
92. AC impedance study of anodically formed salt films on iron in chloride solution10.1149/1.2069467 ↗
93. Anodic oxide films10.1016/B978-0-12-533006-0.50008-6 ↗
94. Effects of ionic migration on the concentrations and mass transfer rate in the diffusion layer of dissolving metals10.1007/BF01132433 ↗
95. Determination of effective capacitance and film thickness from constant-phase-element parameters10.1016/j.electacta.2009.10.065 ↗
96. Enhanced surface hydroxyl groups by using hydrogen peroxide on hollow tubular alumina for removing fluoride10.1016/j.micromeso.2020.110051 ↗
97. Modified description for deposition of particles in small volumes10.1088/1402-4896/acec1d ↗
98. Polarization resistance method for determination of instantaneous corrosion rates10.5006/1.3280536 ↗
99. Erosion under turbulent flow: A CFD-based simulation of near-wall turbulent impacts with experimental validation
100. Advances in understanding hydrodynamic effects on corrosion10.1016/0010-938X(93)90201-Q ↗