journal article·2020-09-20Open access

A Novel Technique to Increase the Thickness of TiO₂ of Dental Implants by Nd: DPSS Q-sw Laser Treatment

Antonio Scarano, Francesca Postiglione, Ahmad G. A. Khater, Faez Saleh Al-Hamed, Felice Lorusso

Materials· Volume 13· Issue 18

Abstract

High bone–implant contact is a crucial factor in the achievement of osseointegration and long time clinical success of dental implants. Micro, nano, microtopography, and oxide layer of dental implants influence tissue response. The lasers were used for achieving an implant surface with homogeneous micro texturing and uncontaminated surface. The present study aimed to characterize the implant surfaces treated by Nd: DPSS Q-sw Laser treatment compared to machined implants. A total of 10 machined implants and 10 lasered surface implants were evaluated in this study. The implant surfaces were evaluated by X-ray Photoelectron Spectroscopy (XPS), Auger Electron Spectroscopy (AES), and metallography to characterize and measure the thickness of the oxide layer on the implant titanium surface. The machined surfaces showed a non-homogeneous oxide layer ranging between 20 and 30 nm. The lasered implant surfaces showed a homogeneous oxide layer ranging between 400 nm and 460 nm in the area of the laser holes, while outside the layer, thickness ranged between 200 nm and 400 nm without microcracks or evidence of damage. Another exciting result after this laser treatment is a topographically controlled, repeatable, homogeneous, and clean surface. This technique can obtain the implant surface without leaving residues of foreign substances on it. The study results indicate that the use of Nd: DPSS Q-sw laser produces a predictable and reproducible treatment able to improve the titanium oxide layer on the dental implant surface.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Dental Implant Techniques and Outcomes · Laser Applications in Dentistry and Medicine · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Medical, Oral and Biotechnological Sciences and CeSi-MeT, University of Chieti-Pescara, Via dei Vestini, 31, 66100 Chieti, Italy

Department of Medical, Oral and Biotechnological Sciences and CasT, University of Chieti-Pescara, Via dei Vestini, 31, 66100 Chieti, Italy

Faculty of Oral and Dental Medicine, Ahram Canadian University, Giza 12511, Egypt

Faculty of Dentistry, McGill University, Montreal, QC H3A 1G1, Canada

References (40)

Show source-provided references
1. Correlation between implant stability quotient (ISQ) with clinical and histological aspects of dental implants removed for mobility10.1177/039463200702001s08 ↗
2. Early Bone Tissue Responses to Turned and Oxidized Implants in the Rabbit Tibia10.1111/j.1708-8208.2007.00074.x ↗
3. Bone response to surface-modified titanium implants: studies on the early tissue response to machined and electropolished implants with different oxide thicknesses10.1016/0142-9612(96)88711-4 ↗
4. Experimental Evaluation in Rabbits of the Effects of Thread Concavities in Bone Formation with Different Titanium Implant Surfaces10.1111/cid.12033 ↗
5. Administration of end-of-life drugs by family caregivers during covid-19 pandemic10.1136/bmj.m1615 ↗
6. Vertical ridge augmentation of atrophic posterior mandible using an inlay technique with a xenograft without miniscrews and miniplates: case series10.1111/j.1600-0501.2010.02083.x ↗
7. Quantitative and qualitative investigations of surface enlarged titanium and titanium alloy implants10.1034/j.1600-0501.1998.090101.x ↗
8. Surface spectroscopic characterization of titanium implants after separation from plastic-embedded tissue10.1016/0142-9612(88)90098-1 ↗
9. Comparison of metal release from various metallic biomaterials in vitro10.1016/j.biomaterials.2004.02.005 ↗
10. Physico-chemical considerations of titanium as a biomaterial10.1016/0267-6605(92)90056-Y ↗
11. Surface thermal oxidation on titanium implants to enhance osteogenic activity and in vivo osseointegration10.1038/srep31769 ↗
12. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation10.1016/j.biomaterials.2003.09.048 ↗
13. Adhesion and growth of osteoblast-like cells on laser-engineered porous titanium surface: expression and localization of N-cadherin and beta-catenin
14. Ionescu, A.C., Brambilla, E., Azzola, F., Ottobelli, M., Pellegrini, G., and Francetti, L.A. (2018). Laser microtextured titanium implant surfaces reduce in vitro and in situ oral biofilm formation. PLOS ONE, 13.10.1371/journal.pone.0202262 ↗
15. Evaluation of Fibrin Clot Attachment on Titanium Laser-Conditioned Surface Using Scanning Electron Microscopy10.1097/SCS.0000000000004519 ↗
16. New laser-treated implant surfaces: a histologic and histomorphometric pilot study in rabbits10.25011/cim.v34i4.15361 ↗
17. Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration10.1016/S0142-9612(03)00300-4 ↗
18. Torque and histomorphometric evaluation of c.p. titanium screws blasted with 25- and 75-microns-sized particles of Al2O310.1002/(SICI)1097-4636(199602)30:2<251::AID-JBM16>3.0.CO;2-P ↗
19. An animal study of c.p. titanium screws with different surface topographies10.1007/BF00120275 ↗
20. Cao, Y., Zeng, X., Cai, Z., and Duan, J. (2010). Laser micro/nano-fabrication techniques and their applications in electronics. Advances in Laser Materials Processing, Elsevier BV.
21. Biomechanical evaluation of laser-etched Ti implant surfaces vs. chemically modified SLA Ti implant surfaces: Removal torque and resonance frequency analysis in rabbit tibias10.1016/j.jmbbm.2016.03.034 ↗
22. Immediately loaded dental implants bioactivated with platelet-rich plasma (PRP) placed in maxillary and mandibular region
23. Bone Response to Two Dental Implants with Different Sandblasted/Acid-Etched Implant Surfaces: A Histological and Histomorphometrical Study in Rabbits
24. Bone response to physical-vapour-deposited titanium dioxide coatings on titanium implants10.1111/j.1600-0501.2012.02509.x ↗
25. In vivo evaluation of hydroxyapatite coatings of different crystallinities
26. Marenzi, G., Impero, F., Scherillo, F., Sammartino, J.C., Squillace, A., and Spagnuolo, G. (2019). Effect of Different Surface Treatments on Titanium Dental Implant Micro-Morphology. Materials, 12.10.3390/ma12050733 ↗
27. Dental Implant Surfaces—Physicochemical Properties, Biological Performance, and Trends
28. Influence of the Thermal Treatment to Address a Better Osseointegration of Ti6Al4V Dental Implants: Histological and Histomorphometrical Study in a Rabbit Model
29. Design of bioactive bone substitutes based on biomineralization process10.1016/j.msec.2005.01.002 ↗
30. Solutions able to reproducein vivo surface-structure changes in bioactive glass-ceramic A-W310.1002/jbm.820240607 ↗
31. Improvement of bioactivity of H2O2/TaCl5-treated titanium after subsequent heat treatments10.1002/1097-4636(200010)52:1<171::AID-JBM22>3.0.CO;2-O ↗
32. Comparison between sol-gel-derived anatase- and rutile-structured TiO2 coatings in soft-tissue environment10.1002/jbm.a.31245 ↗
33. (Ken) Plasma-controlled nanocrystallinity and phase composition of TiO2: A smart way to enhance biomimetic response10.1002/jbm.a.30987 ↗
34. Corrosion resistance and ion dissolution of titanium with different surface microroughness
35. Formation and characterization of anodic titanium oxide films containing Ca and P10.1002/jbm.820290110 ↗
36. Effect of Cyclic Precalcification of Nanotubular TiO2 Layer on the Bioactivity of Titanium Implant
37. Enhanced biocompatibility of a pre-calcified nanotubular TiO2 layer on Ti–6Al–7Nb alloy10.1016/j.surfcoat.2013.09.038 ↗
38. A Novel Investigation of the Formation of Titanium Oxide Nanotubes on Thermally Formed Oxide of Ti-6Al-4V10.1563/AAID-JOI-D-13-00340 ↗
39. Bacterial Adhesion on Commercially Pure Titanium and Anatase-Coated Titanium Healing Screws: An In Vivo Human Study10.1902/jop.2010.100061 ↗
40. Periodontal disease and bone pathogenesis: The crosstalk between cytokines and porphyromonas gingivalis