Pulsed Thermography Inspection of Composite Anticorrosive Coatings: Defect Detection and Analysis of Their Thermal Behavior through Computational Simulation
Source abstract
Abstract
The use of anticorrosive coatings has been a powerful method to be applied on the surface of metallic materials to mitigate the corrosive process. In this study, the focus is composite coatings that are commonly used on the internal surface of storage tanks in petrochemical industries. The development of non-destructive methods for inspection of faults in this field is desired due to unhealthy access and mainly because undercoating corrosion is difficult to detect by visual inspection. Pulsed thermography (PT) was employed to detect undercoating corrosion and adhesion loss of anticorrosive composite coatings defects. Additionally, a computational simulation model was developed to complement the PT tests. According to the experimental results, PT was able to detect all types of defects evaluated. The results obtained by computational simulation were compared with experimental ones. Good correlation (similarity) was verified, regarding both the defect detection and thermal behavior, validating the developed model. Additionally, by reconstructing the thermal behavior according to the defect parameters evaluated in the study, it was estimated the limit of the remaining thickness of the defect for which it would be possible to obtain its detection using the pulsed modality.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Thermography and Photoacoustic Techniques · Welding Techniques and Residual Stresses · Ultrasonics and Acoustic Wave Propagation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Laboratory of Non Destructive Testing, Corrosion and Welding (LNDC), Department of Metallurgical and Materials Engineering, Federal University of Rio de Janeiro, Rio de Janeiro 21941-594, Brazil
Department of Metallurgical and Materials Engineering, POLI and COPPE/UFRJ, Federal University of Rio de Janeiro, P.O, Rio de Janeiro CEP 21941-972, Brazil
References (25)
Show source-provided references
1. Anticorrosive coatings: A review10.1007/s11998-008-9144-2 ↗
2. Lyon, S., Bingham, R., and Mills, D.J. (2016). Advances in corrosion protection by organic coatings: What we know and what we would like to know. Prog. Org. Coat.10.1016/j.porgcoat.2016.04.030 ↗
3. Eddy current and inspection of coatings for storage tanks10.1016/j.jmrt.2018.05.006 ↗
4. Maldague, X.P.V., and Moore, P.O. (2001). Infrared and Thermal Testing—Non Destructive Testing, ASNT.
5. Study on the limit detection of defects by pulsed thermography in adhesive composite joints through computational simulation10.1016/j.compositesb.2019.03.083 ↗
6. Mukhopadhyay, S.C. (2011). Pulsed Eddy Current Thermography and Applications. New Developments in Sensing Technology for Structural Health Monitoring, Springer. Lecture Notes in Electrical Engineering.10.1007/978-3-642-21099-0 ↗
7. Modeling and classification of defects in CFRP laminates by thermal non-destructive testing10.1016/j.compositesb.2017.10.010 ↗
8. Validation of flash thermography using computed tomography for characterizing inhomogeneities and defects in CFRP structures10.1016/j.compositesb.2014.04.027 ↗
9. Characterizing damage in CFRP structures using flash thermography in reflection and transmission configurations10.1016/j.compositesb.2013.09.036 ↗
10. Mechanical damage assessment of Polymer-Matrix Composites using active thermography10.1016/j.compositesb.2014.05.017 ↗
11. Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis10.1016/j.conbuildmat.2009.12.016 ↗
12. Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques10.1016/j.ndteint.2008.05.007 ↗
13. Maldague, X.P.V. (2001). Theory and Practice of Infrared Technology for Nondestructive Testing, John-Wiley & Sons.
14. Damage assessment of composite materials by means of thermographic analyses10.1016/j.compositesb.2013.01.012 ↗
15. Gallietti, U., Dimitri, R., Palumbo, D., and Rubino, P. (2012, January 24–28). Thermal analysis and mechanical characterization of GFRP joints. Proceedings of the 15th European conference on composite materials: Composites at Venice, ECCM, Venice, Italy.
16. Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography10.1016/j.compstruct.2011.08.017 ↗
17. Defect detection in CFRP structures using pulsed thermographic data enhanced by penalized least squares methods10.1016/j.compositesb.2015.04.049 ↗
18. Evaluation of gluing of CFRP onto concrete structures by infrared thermography coupled with thermal impedance10.1016/j.compositesb.2014.10.002 ↗
19. Unnikrishnakurup, S., Dash, J., Ray, S., Pesala, B., and Balasubramaniam, K. (2020). Nondestructive evaluation of thermal barrier coating thickness degradation using pulsed IR thermography and THz-TDS measurements: A comparative study. NDT E Int., 116.10.1016/j.ndteint.2020.102367 ↗
20. Lukáš, M., and Švantner, M. (2020). Flash pulse phase thermography for a paint thickness determination. IOP Conference Series: Materials Science and Engineering, IOP Publishing.
21. Artificial disbonds for calibration of transient thermography inspection of thermal barrier coating systems10.1016/j.ndteint.2011.09.008 ↗
22. Quality evaluation for air plasma spray thermal barrier coatings with pulsed thermography10.1016/S1002-0071(12)60061-6 ↗
23. Theoretical and experimental study on thermal barrier coating (TBC) uneven thickness detection using pulsed infrared thermography technology10.1016/j.applthermaleng.2016.12.032 ↗
24. Quantitative detection of thermal barrier coating thickness based on simulated annealing algorithm using pulsed infrared thermography technology10.1016/j.applthermaleng.2016.01.143 ↗
25. Incropera, F.P., and De Witt, D.P. (1990). Introduction to Heat Transfer, John Wiley & Sons.