article·2021-05-19Open access

(Ti,Al)O2 Whiskers Grown during Glow Discharge Nitriding of Ti-6Al-7Nb Alloy

Krzysztof Szymkiewicz, J. Morgiel, Łukasz Maj, Małgorzata Pomorska

Abstract

Plasma nitriding of titanium alloys is capable of effective surface hardening at temperatures significantly lower than gas nitriding, but at a cost of much stronger surface roughening. Especially interesting are treatments performed at the lower end of the temperature window used in such cases, as they are least damaging to highly polished parts. Therefore identifying the most characteristic defects is of high importance. The present work was aimed at identifying the nature of pin-point bumps formed at the glow discharged plasma nitrided Ti-6Al-7Nb alloy using plan-view scanning and cross-section transmission electron microscopy methods. It helped to establish that these main surface defects developed at the treated surface are (Ti,Al)O2 nano-whiskers of diameter from 20 nm to 40 nm, and length up to several hundreds of nanometers. The performed investigation confirmed that the surface imperfection introduced by plasma nitriding at the specified range should be of minor consequences to the mechanical properties of the treated material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.