Tunable Energy Absorbing Property of Bilayer Amorphous Glass Foam via Dry Powder Printing
Source abstract
Abstract
The research in this paper entails the design of material systems with tunable energy-absorbing properties. Hollow glass microspheres of different densities are layered using dry powder printing and subsequently sintered to form a cellular structure. The tunability of the bilayer foams is investigated using various combinations of hollow microspheres with different densities and different thickness ratios of the layers. The mechanical responses to quasi-static uniaxial compression of the bilayer foams are also investigated. These bilayer samples show different mechanical responses from uniform samples with a distinctive two-step stress–strain profile that includes a first and second plateau stress. The strain where the second plateau starts can be tuned by adjusting the thickness ratio of the two layers. The resulting tunable stress–strain profile demonstrates tunable energy absorption. The tunability is found to be more significant if the density values of each layer differ largely. For comparison, bilayer samples are fabricated using epoxy at the interface instead of a sintering process and a different mechanical response is shown from a sintered sample with the different stress–strain profile. Designing the layered foams allows tuning of the stress–strain profile, enabling desired energy-absorbing properties which are critical in diverse impact conditions.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Advanced Materials and Mechanics · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Aerospace Engineering, University of Maryland, College Park, MD 20742, USA
Microsphere Material Solutions, Rockville, MD 20852, USA
Funding
Maryland Technology Enterprise Institute (MTECH)
References (40)
Show source-provided references
1. Peak acceleration during impact with helmet materials: Effects of impactor mass and speed10.1080/17461391.2012.705334 ↗
2. Quasistatic and high strain rate uniaxial compressive response of polymeric structural foams10.1016/j.ijimpeng.2004.11.006 ↗
3. Applications of polymer matrix syntactic foams10.1007/s11837-013-0796-8 ↗
4. Negroni, C. (The New York Times, 2012). Questioning Safety of Heavy Passengers on Planes, The New York Times.
5. Soft mechanical metamaterials with unusual swelling behavior and tunable stress-strain curves10.1126/sciadv.aar8535 ↗
6. Tunable acoustics with dielectric elastomer activated granular jamming exhibiting a solid–fluid transition10.1063/5.0027968 ↗
7. Adaptive energy-absorbing materials using field-responsive fluid-impregnated cellular solids10.1088/0964-1726/16/1/013 ↗
8. Stiffening in soft robotics: A review of the state of the art10.1109/MRA.2016.2582718 ↗
9. Responsive biomimetic networks from polyisocyanopeptide hydrogels10.1038/nature11839 ↗
10. Architected lattices with adaptive energy absorption10.1016/j.eml.2019.100557 ↗
11. Modeling the Temperature-Dependent Structural Performance of Rigid Polyurethane and Polyisocyanurate Foams Using Mean-Field Homogenization and Finite Element Analysis
12. Optimization of cellular solids for energy absorption10.1016/j.scriptamat.2014.02.013 ↗
13. A mechanical model of cellular solids for energy absorption10.1002/adem.201800457 ↗
14. Cellular solids10.1557/mrs2003.79 ↗
15. An investigation into reinforced and functionally graded lattice structures10.1177/0021955X16639035 ↗
16. Design and development of novel bio-based functionally graded foams for enhanced acoustic capabilities10.1007/s10853-014-8681-6 ↗
17. Fabrication and Mechanical Characterisation of Titanium Lattices with Graded Porosity10.3390/met4030401 ↗
18. Tailoring epoxy foam properties with an innovative process approach using CO2 as blowing agent
19. Combinational design of heterogeneous lattices with hybrid region stiffness tuning for additive manufacturing10.1016/j.matdes.2021.109955 ↗
20. Gradient regulation and compressive properties of density-graded aluminum foam10.1016/j.msea.2019.138658 ↗
21. Crushing behavior of functionally graded lattice10.1007/s11837-021-04946-x ↗
22. Fiedler, T., Movahedi, N., York, L., and Broxtermann, S. (2020). Functionally-graded metallic syntactic foams produced via particle pre-compaction. Metals, 10.10.3390/met10030314 ↗
23. Energy absorption of integrated functionally gradient syntactic foam10.1177/0021955X10368321 ↗
24. Bilayer glass foams with tunable energy absorption via localized void clusters10.1002/adem.202100105 ↗
25. Hollow glass microspheres. Use, properties, and technology10.1007/BF00680655 ↗
26. Ceramic hollow spheres and their applications10.1016/S1359-0286(98)80010-7 ↗
27. Recent progress on the fabrication of hollow microspheres
28. Hollow microspheres10.1002/ceat.200406138 ↗
29. Epoxy/glass syntactic foams for structural and functional application - A review10.1016/j.eurpolymj.2022.111163 ↗
30. Quasi-static uni-axial compression behaviour of hollow glass microspheres/epoxy based syntactic foams10.1016/j.matdes.2011.04.058 ↗
31. Manufacturing and impact behavior of syntactic foam10.1002/(SICI)1097-4628(20000523)76:8<1324::AID-APP13>3.0.CO;2-# ↗
32. Effects of hollow glass microsphere density and surface modification on the mechanical and thermal properties of poly(methyl methacrylate) syntactic foams10.1016/j.compstruct.2018.02.088 ↗
33. Process parameter effects on cellular structured materials using hollow glass spheres10.1080/10426914.2019.1594256 ↗
34. Uniaxial quasistatic and dynamic compressive response of foams made from hollow glass microspheres10.1016/j.jeurceramsoc.2015.10.018 ↗
35. Dasan, A., Kraxner, J., Grigolato, L., Savio, G., Elsayed, H., Galusek, D., and Bernardo, E. (2022). 3D printing of hierarchically porous lattice structures based on Åkermanite glass microspheres and reactive silicone binder. J. Funct. Biomater., 13.10.3390/jfb13010008 ↗
36. Preparation of lightweight glass microsphere/Al sandwich composites with high compressive properties10.1016/j.matlet.2021.131220 ↗
37. Review of binding agents in syntactic foams for heat-insulating structures in power industry Facilities
38. Advanced new lightweight materials: Hollow-sphere composites (HSCs) for mechanical engineering applications10.1002/adem.200320137 ↗
39. A review of thermal conductivity of polymer matrix syntactic foams—Effect of hollow particle wall thickness and volume fraction10.1007/s11837-012-0512-0 ↗
40. Compressive strain at the onset of densification of cellular solids10.1177/0021955X06063519 ↗