journal article·2024-04-08Open access

Influence of an Engineered Notch on the Electromagnetic Radiation Performance of NiTi Shape Memory Alloy

Anu Anand, Rajeev Kumar, Shatrudhan Pandey, S. M. Mozammil Hasnain, Saurav Goel

Materials· Volume 17· Issue 7

Abstract

This work explores the influence of a pre-engineered notch on the electromagnetic radiation (EMR) parameters in NiTi shape memory alloy (SMA) during tensile tests. The test data showed that the EMR signal fluctuated between oscillatory and exponential, signifying that the specimen’s viscosity damping coefficient changes during strain hardening. The EMR parameters, maximum EMR amplitude, and average EMR energy release rate remained constant initially but rose sharply with the plastic zone radius with progressive loading. It was postulated that new Frank–Read sources permit dislocation multiplication and increase the number of edge dislocations participating in EMR emissions, leading to a rise in the value of EMR parameters. The study of the correlation between EMR emission parameters and the plastic zone radius before the crack tip is a vital crack growth monitoring tool. An analysis of the interrelationship of the EMR energy release rate at fracture with the elastic strain energy release rate would help develop an innovative approach to assess fracture toughness, a critical parameter for the design and safety of metals. The microstructural analysis of tensile fractures and the interrelation between deformation behaviours concerning the EMR parameters offers a novel and real-time approach to improve the extant understanding of the behaviour of metallic materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Optical and Acousto-Optic Technologies · Shape Memory Alloy Transformations · Infrared Target Detection Methodologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Birla Institute of Technology, Mesra, Ranchi 835215, India

Department of Production and Industrial Engineering, Birla Institute of Technology, Mesra, Ranchi 835215, India

Faculty of Engineering and Applied Science, Usha Martin University, Ranchi 835103, India

School of Engineering, London South Bank University, 103 Borough Road, London SE1 0AA, UK

Department of Mechanical Engineering, University of Petroleum and Energy Studies, Dehradun 248007, India

Funding

UKRI · British Counsil · Royal Society

References (31)

Show source-provided references
1. Stress strain analysis of notched specimen based on material property gradient10.1016/j.proeng.2012.01.1037 ↗
2. Effects of notch-load-defect interactions on the local stress-strain fields and strain hardening of additively manufactured 18Ni300 steel10.1016/j.msea.2023.145165 ↗
3. Notch effect of materials: Strengthening or weakening?10.1016/j.jmst.2014.04.014 ↗
4. Electromagnetic effects at metallic fracture10.1038/254133a0 ↗
5. Misra, A. (1975). Ninth Yearbook to the Encyclopedia of Science and Technology, Mondadori.
6. A physical model for the stress-induced electromagnetic effect in metals10.1007/BF00930387 ↗
7. Electromagnetic emission during the fracture of metals
8. Electromagnetic emission during the fracture of heat-treated steel10.1016/0167-577X(88)90043-2 ↗
9. Fractoemission from the failure of metal/epoxy interfaces10.1116/1.572788 ↗
10. Brown, W., and Calahan, K. (August, January 31). Electromagnetic radiation from the high strain rate fracture of mild carbon-steel. Proceedings of the 14th APS Topical Conference on Shock Compression of Condensed Matter, Baltimore, MD, USA.
11. A critical discussion of the electromagnetic radiation (EMR) method to determine stress orientations within the crust10.5194/se-3-401-2012 ↗
12. Secondary electromagnetic radiation during plastic deformation and crack propagation in uncoated and tin coated plain-carbon steel10.1007/s10853-005-1293-4 ↗
13. Effect of processing parameters on the electromagnetic radiation emission during plastic deformation and crack propagation in copper-zinc alloys10.1631/jzus.2006.A1800 ↗
14. Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in metals and alloys10.3139/146.110355 ↗
15. Variation in electromagnetic radiation during Plastic deformation under tension and compression of metals10.1007/s00339-014-8509-x ↗
16. Effects of strain rate and elevated temperature on electromagnetic radiation emission during plastic deformation and crack propagation in ASTM B 265 grade 2 titanium sheets10.1007/s10853-008-2590-5 ↗
17. Assessment of grain size and lattice parameters of titanium alloy through electromagnetic emission technique
18. Correlation of plastic deformation induced Intermittent electromagnetic radiation characteristics with mechanical properties of Cu–Ni alloys10.3139/146.111167 ↗
19. Effect of notch-depth ratio on intermittent electromagnetic radiation from Cu–Ni alloy under tension10.3139/120.111402 ↗
20. A review of the electromagnetic radiation emission and magnetic field generation in metallic materials under stress10.1007/s12666-023-03067-0 ↗
21. Measurement of electromagnetic radiation in the single point incremental forming of AA3003-O
22. Some investigations on the intermittent electromagnetic radiation during plastic deformation of sintered powder zinc specimens under compression10.1016/j.matpr.2022.03.313 ↗
23. Anand, A., and Kumar, R. (2022). Recent Developments in Mechanics and Design: Select Proceedings of INCOME 2021, Springer Nature.
24. Exploring the impact of varying notch-width ratios on electromagnetic radiation parameters at tensile fracture of C35000 brass10.1016/j.jmrt.2023.12.232 ↗
25. Mechanisms for phase transformation induced slip in shape memory alloy micro-crystals10.1016/j.actamat.2017.04.066 ↗
26. Nitinol for medical applications: A brief introduction to the properties and processing of nickel titanium shape memory alloys and their use in stents10.1595/205651317X694524 ↗
27. Broek, D. (1982). Elementary Engineering Fracture Mechanics, Martinus Nijhoff Publishers. [3rd ed.].10.1007/978-94-009-4333-9 ↗
28. Hertzberg, R.W., Vinci, R.P., and Hertzberg, J.L. (2020). Deformation and Fracture Mechanics of Engineering Materials, John Wiley & Sons.
29. Haykin, S., and Van, V.B. (2002). Signal and Systems, John Wiley.
30. The effect of notches on the fracture behavior in NiTi shape memory alloys10.1016/j.ijsolstr.2008.09.007 ↗
31. A theoretical model for the electromagnetic radiation emission during plastic deformation and crack propagation in metallic materials10.1007/s10704-007-9107-0 ↗