journal article·2020-06-30Open access

Description of Residual Stresses in Autofrettaged Open-Ended Cylinders Made of High-Strength Steel

Sergei Alexandrov, Elena Lyamina, Jong-Ning Aoh, Yeau-Ren Jeng

Materials· Volume 13· Issue 13

Abstract

The elastic range in loading–unloading processes is often reduced with a Bauschinger effect. This material property may have a high impact on residual stresses and, as a result, on the performance of autofrettaged cylinders under service conditions. The objective of the present paper is to demonstrate this impact using a material model that accounts for the response of typical high-strength steel. The solution is semi-analytic and, therefore, can be used for fast and accurate analysis of the process of autofrettage. A numerical example illustrates the general solution. This example shows that the Bauschinger effect has a significant impact on the residual circumferential stress in the vicinity of the inner radius of the cylinder. This stress is the most significant quantity of autofrettaged cylinders. Therefore, the main result obtained suggests that even a moderate Bauschinger effect should be taken into account in analyses of the process of autofrettage.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Material Properties and Failure Mechanisms · Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division of Computational Mathematics and Engineering, Institute for Computational Science, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam

Faculty of Civil Engineering, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam

Ishlinsky Institute for Problems in Mechanics RAS, Moscow 119526, Russia

Department of Mechanical Engineering, National Chung Cheng University, Chiayi 62102, Taiwan

Advanced Institute of Manufacturing with High-Tech Innovations (AIM-HI), National Chung Cheng University, Chiayi 62102, Taiwan

Department of Biomedical Engineering, National Cheng Kung University, Tainan City 70101, Taiwan

Funding

Russian Foundation for Basic Research · Ministry of Science and Technology, Taiwan

References (27)

Show source-provided references
1. Autofrettage of cylinders: Prediction of pressure/ external expansion curves and calculation of residual stresses10.1243/PIME_PROC_1960_174_069_02 ↗
2. The Bauschinger effect in a high strength steel10.1115/1.3645883 ↗
3. Fatigue of autofrettaged thick tubes: Closed and open ends; as received and honed10.1115/1.3225643 ↗
4. Rees, D.W.A. (2006). Basic Engineering Plasticity, Elsevier.10.1016/B978-0-7506-8025-7.50009-X ↗
5. Descriptions of reversed yielding in bending10.1243/09544062JMES443 ↗
6. Descriptions of reversed yielding of a solid circular bar in torsion10.1243/09544062JMES919 ↗
7. Influence of Bauschinger effect on springback and residual stresses in plane strain pure bending10.1007/s00707-011-0469-z ↗
8. Gui, H., Li, Q., and Huang, Q.-X. (2015). The influence of Bauschinger effect in straightening process. Math. Prob. Eng.10.1155/2015/612840 ↗
9. Description of reversed yielding in thin hollow discs subject to external pressure10.12989/sem.2016.58.4.661 ↗
10. Hill, R. (1950). The Mathematical Theory of Plasticity, Clarendon Press.
11. Swage autofrettage analysis–Current status and future prospects10.1016/j.ijpvp.2019.03.007 ↗
12. Analysis of residual stress in the rotational autofrettage of thick-walled disks10.1115/1.4041339 ↗
13. Feasibility study of thermal autofrettage of thick-walled cylinders10.1115/1.4030025 ↗
14. Elastoplastic think-walled tubes of work-hardening material subject to internal and external pressures and to temperature gradients10.1016/0022-5096(56)90030-8 ↗
15. Dixit, U.S., Kamal, S.M., and Shufen, R. (2019). Autofrettage Processes: Technology and Modelling, CRC Press.10.1201/9780429425431 ↗
16. Rynkovskaya, M., Alexandrov, S., and Lang, L. (2019). A theory of autofrettage for open-ended, polar orthotropic cylinders. Symmetry, 11.10.3390/sym11020280 ↗
17. Experimental study on residual stresses in autofrettaged thick-walled high pressure cylinders10.1080/08957959.2017.1380197 ↗
18. Comparative measurements on autofrettaged cylinders with large Bauschinger reverse yielding zones10.1243/0309324001514224 ↗
19. A study on hydraulic autofrettage of thick-walled cylinders incorporating Bauschinger effect10.1007/s11340-009-9255-4 ↗
20. A semi-analytic method for elastic/plastic shrink-fit analysis and design10.1177/0309324715571149 ↗
21. A new method of analyzing stresses and strains in work-hardening10.1115/1.4011389 ↗
22. Benchmark tests for 3-D, elasto-plastic, finite-element codes for the modeling of metal forming processes10.1016/0924-0136(92)90090-F ↗
23. On the accuracy of benchmark tables and graphical results in the applied mechanics literature10.1115/1.1427691 ↗
24. High dislocation density–induced large ductility in deformed and partitioned steels10.1126/science.aan0177 ↗
25. Hashmi, S. (2014). Material Modeling and Characterization. Comprehensive Materials Processing, Elsevier.
26. Stress and strain fields in rotating elastic/plastic annular discs10.1007/s00419-015-1101-9 ↗
27. Alexandrov, S. (2015). Elastic/Plastic Discs under Plane Stress Conditions, Springer.10.1007/978-3-319-14580-8 ↗