AFM Measurements and Testing Properties of HDPE and PBT Composites with Fillers in the Form of Montmorillonite and Aluminum Hydroxide
Source abstract
Abstract
This paper presents the effect of the addition of fillers such as aluminum hydroxide or montmorillonite on the structure and properties of polymers such as high-density polyethylene (HDPE) and polybutylene terephthalate (PBT). Both types of specimens were obtained by injection molding. X-ray diffraction examinations were performed on the materials obtained to determine the effect of the addition of the fillers used on the degree of crystallinity of the composites. The density and hardness of the composites were evaluated, and the static tensile test and the analysis of the structure parameters using atomic force microscopy (AFM) were also carried out. It was shown that the addition of powder fillers to polymers such as high-density polyethylene and polybutylene terephthalate affects the structure parameters such as surface roughness, mean grain size, anisotropy ratio, fractal dimension, the corner frequency of the composites, and mechanical properties such as Young’s pseudo-modulus, average adhesion force, hardness, and tensile strength.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Faculty of Production Engineering and Materials Technology, Czestochowa University of Technology, Armii Krajowej Street 19, 42-201 Czestochowa, Poland
Faculty of Mechanical Engineering and Computer Science, Czestochowa University of Technology, Armii Krajowej Street 21, 42-201 Czestochowa, Poland
Faculty of Technical Sciences, University of Warmia and Mazury in Olsztyn, Oczapowskiego 11, 10-719 Olsztyn, Poland
References (39)
Show source-provided references
1. Rosato, D., Rosato, M.G., and Schott, N.R. (2010). Plastics Technology Handbook, Momentum Press.
2. Ehrenstein, G.W. (2001). Polymeric Materials, Hanser Publishers.10.3139/9783446434134.fm ↗
3. Kutz, M. (2017). Engineering Thermoplastics—Materials, Properties. Trends. Applied Plastics Engineering Handbook, Elsevier. [2nd ed.].
4. Kutz, M. (2002). Plastics: Thermoplastics, Thermosets, and Elastomers. Handbook of Materials Selection, John Wiley&SOONS INC.10.1002/9780470172551 ↗
5. A study on the production of a new material from fly ash and polyethylene10.1016/0921-3449(94)00014-V ↗
6. Schut, J.H. (2022, October 23). Fly-Ash Filler Stages a Comeback. Plastic Technology. Available online: www.ptonline.com/articles/fly-ash-filler-stages-a-comeback.
7. Mechanical and thermal characteristics of high density polyethylene-fly ash Cenospheres composites10.1016/j.matdes.2009.10.014 ↗
8. Mechanical properties of fly ash filled high density polyethylene
9. Effect of particle size of fly ash on recycled poly (ethylene terephthalate)/fly ash composites10.1007/s12588-010-0006-2 ↗
10. Extruded poly(ethylene-co-octene)/fly ash composites—Value added products from an environmental pollutant10.1007/s10965-012-9840-6 ↗
11. Influence of fly ash cenospheres on performance of coir fiber-reinforced recycled high-density polyethylene biocomposites10.1002/app.42237 ↗
12. Preparation of polypropylene/montmorillonite nanocomposites by intercalative polymerization: Effect of in situ polymer matrix functionalization on the stability of the nanocomposite structure10.1007/s11434-007-0017-3 ↗
13. Polypropylene/montmorillonite nanocomposites, review of the synthetic routes and materials properties10.1021/cm0110627 ↗
14. Properties of poly(butylene terephthalate) polymerized from cyclic oligomers and its composites10.1016/j.polymer.2005.07.082 ↗
15. Acomparative study on thermal and catalytic degradation of polybutylene terephthalate10.1016/j.jaap.2009.03.003 ↗
16. Osswald, T.A., Baur, E., Brinkmann, S., Oberbach, K., and Schmachtenberg, E. (2006). International Plastics Handbook, Hanser.10.1007/978-3-446-40792-3 ↗
17. Thermal and electrical conductivities of carbon fibers and carbon nanotubes incorporated polyurethanes composites10.4028/www.scientific.net/KEM.442.349 ↗
18. Flame retardancy of nanocomposites10.1002/fam.842 ↗
19. Effect of particle size on the properties of Mg(OH)2-filled rubber composites10.1002/app.21037 ↗
20. The effectiveness of magnesium carbonate-based flame retardants for poly(ethylene-co-vinyl acetate) and poly(ethylene-co-ethyl acrylate)10.1002/fam.950 ↗
21. Synergistic effects of expandable graphite with magnesium hydroxide on the flame retardancy and thermal properties of polypropylene10.1002/pen.20867 ↗
22. Microstructure and X-ray diffraction of polypropylene and polypropylene with glass fibre
23. Gwoździk, M., Kulesza, S., and Bramowicz, M. (2017, January 24–26). Application of the fractal geometry methods for analysis of oxide layer. Proceedings of the METAL 2017: 26th International Conference on Metallurgy and Materials, Ostrava, Czech Republic.
24. Surface Morphology Analysis of Martensitic Stainless Steel after Different Treatments10.12693/APhysPolA.135.157 ↗
25. Surface morphology analysis of oxide layers formed on 10CrMo9-10 steel used in the power industry10.1088/2053-1591/ab5ea9 ↗
26. Gwoździk, M., Bramowicz, M., and Kulesza, S. (2022). Evolution of the geometric structure of X39Cr13 steel upon thermochemical treatment specific to medical-grade steel. Lubricants, 10.10.3390/lubricants10060114 ↗
27. A fractal crazing constitutive model of glassy polymers considering damage and toughening10.1016/j.engfracmech.2022.108354 ↗
28. In situ AFM investigation of slow crack propagation mechanisms in a glassy polymer10.1016/j.jmps.2017.11.019 ↗
29. Micromorphology and fractal analysis of nickel–carbon composite thin films10.1007/s10854-016-5268-9 ↗
30. Multifractal analysis of sputtered indium tin oxide thin film surfaces10.1016/j.apsusc.2019.04.170 ↗
31. Surface profile topography of ionic polymer metal compositebased on fractal theory10.1016/j.surfin.2020.100834 ↗
32. Microstructure, fractal geometry and corrosion properties of CrN thin films: The effect of shot number and angular position10.1016/j.mtcomm.2022.104072 ↗
33. Comprehensive study of parameters for characterising three- dimensional surface topography: III: Parameters for characterising amplitude and some functional properties10.1016/0043-1648(94)90127-9 ↗
34. The spatial representation of surface roughness by means of the structure function: A practical alternative to correlation10.1016/0043-1648(77)90057-6 ↗
35. Digital analysis of very small scale surface roughness
36. Amjadi, M., and Fatemi, A. (2020). Tensile behavior of high-density polyethylene including the effects of processing technique, thickness, temperature, and strain rate. Polymers, 12.10.3390/polym12091857 ↗
37. Saleh, M., Al-Hajri, Z., Popelka, A., and Zaidi, S.J. (2020). Preparation and characterization of alumina HDPE composites. Materials, 13.10.3390/ma13010250 ↗
38. Hamlaoui, O., Klinkova, O., Elleuch, R., and Tawfiq, I. (2022). Effect of the glass fiber content of a polybutylene terephthalate reinforced composite structure on physical and mechanical characteristics. Polymers, 14.10.3390/polym14010017 ↗
39. Borges Catarina, S.P., Akhavan-Safar, A., Marquez Eduardo, A.S., Carbas Ricardo, J.C., Ueffing, C., Weißgraeber, P., and da Silva Lucas, F.M. (2021). Effect of water ingress on the mechanical and chemical properties of polybutylene terephthalate reinforced with glass fibers. Materials, 14.10.3390/ma14051261 ↗