journal article·2021-07-31Open access

Modulation of Crystallinity through Radiofrequency Electromagnetic Fields in PLLA/Magnetic Nanoparticles Composites: A Proof of Concept

Marta Multigner, Irene Morales, Marta Muñoz, Victoria Bonache, Fernando Giacomone, Patricia de la Presa, Rosario Benavente, Belén Torres, Diego Mantovani, Joaquín Rams

Materials· Volume 14· Issue 15

Abstract

To modulate the properties of degradable implants from outside of the human body represents a major challenge in the field of biomaterials. Polylactic acid is one of the most used polymers in biomedical applications, but it tends to lose its mechanical properties too quickly during degradation. In the present study, a way to reinforce poly-L lactic acid (PLLA) with magnetic nanoparticles (MNPs) that have the capacity to heat under radiofrequency electromagnetic fields (EMF) is proposed. As mechanical and degradation properties are related to the crystallinity of PLLA, the aim of the work was to explore the possibility of modifying the structure of the polymer through the heating of the reinforcing MNPs by EMF within the biological limit range f·H < 5·× 109 Am−1·s−1. Composites were prepared by dispersing MNPs under sonication in a solution of PLLA. The heat released by the MNPs was monitored by an infrared camera and changes in the polymer were analyzed with differential scanning calorimetry and nanoindentation techniques. The crystallinity, hardness, and elastic modulus of nanocomposites increase with EMF treatment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Applied Mathematics, Materials Science and Engineering and Electronic Technology, Universidad Rey Juan Carlos, 28933 Madrid, Spain

Instituto de Magnetismo Aplicado, UCM-ADIF-CSIC, A6 22,500 Km, 28230 Las Rozas, Spain

Institute of Polymer Science and Technology (ICTP-CSIC), C/Juan de la Cierva 3, 28006 Madrid, Spain

Laboratory for Biomaterials & Bioengineering (CRC-I), Department Min-Met-Materials Engineering & Research Center CHU de Québec, Laval University, Québec, QC G1V 0A6, Canada

Funding

Comunidad de Madrid · Ministerio de Ciencia e Innovación · Ayudas a la Movilidad PDI URJC

References (28)

Show source-provided references
1. Biodegradable fixation of mandibular fractures in children: Stability and early results10.1016/j.tripleo.2004.11.013 ↗
2. Pawellec, K.M., and Planell, J.A. (2009). Polymers for Bone Repair. Bone Repair Biomaterials, Woodhead Publishing.10.1533/9781845696610 ↗
3. Thakur, V.-K., Thakur, M.K., and Kessler, M.R. (2017). Biodegradable and Bioabsorbable Materials for Osteosynthesis Applications: State-of-the-Art and Future Perspectives. Handbook of Composites from Renewable Materials, Scrivener Publishing LLC. [1st ed.].
4. Magnetic fluid hyperthermia (MFH): Cancer treatment with AC magnetic field induced excitation of biocompatible superparamagnetic nanoparticles10.1016/S0304-8853(99)00088-8 ↗
5. Usable Frequencies in Hyperthermia with Thermal Seeds10.1109/TBME.1984.325372 ↗
6. Magnetic particle hyperthermia biophysical limitations of a visionary tumour therapy10.1016/j.jmmm.2006.10.1156 ↗
7. Morales, I., Costo, R., Mille, N., Da Silva, G.B., Carrey, J., Hernando, A., and De la Presa, P. (2018). High Frequency Hysteresis Losses on γ-Fe2O3 and Fe3O4: Susceptibility as a Magnetic Stamp for Chain Formation. Nanomaterials, 8.10.3390/nano8120970 ↗
8. In-Situ particles reorientation during magnetic hyperthermia application: Shape matters twice10.1038/srep38382 ↗
9. Bonvin, D., Alexander, D.T.L., Millán, A., Piñol, R., Sanz, B., Goya, G.F., Martínez, A., Bastiaansen, J.A.M., Stuber, M., and Schenk, K.J. (2017). Tuning Properties of Iron Oxide Nanoparticles in Aqueous Synthesis without Ligands to Improve MRI Relaxivity and SAR. Nanomaterials, 7.10.3390/nano7080225 ↗
10. Specific absorption rate dependence on temperature in magnetic field hyperthermia measured by dynamic hysteresis losses (ac magnetometry)10.1088/0957-4484/26/1/015704 ↗
11. One pot synthesis of monodisperse water soluble iron oxide nanocrystals with high values of the specific absorption rate10.1039/c4tb00061g ↗
12. Particle interactions in liquid magnetic colloids by zero field cooled measurements: Effects on heating efficiency10.1021/jp5115515 ↗
13. Study of Heating Efficiency as a Function of Concentration, Size, and Applied Field in γ-Fe2O3 Nanoparticles10.1021/jp310771p ↗
14. In-gel study of the effect of magnetic nanoparticles immobilization on their heating efficiency for application in Magnetic Fluid Hyperthermia10.1016/j.jmmm.2018.09.111 ↗
15. Improving the magnetic heating by disaggregating nanoparticles10.1016/j.jallcom.2015.10.285 ↗
16. Improving Mechanical Performance of Injection Molded PLA by Controlling Crystallinity10.1002/app.27261 ↗
17. Ultrasmall Iron Oxide Nanoparticles for Biomedical Applications: Improving the Colloidal and Magnetic Properties10.1021/la203428z ↗
18. Processing technologies for poly (lactic acid)10.1016/j.progpolymsci.2008.05.004 ↗
19. Effect of Mg content on the thermal stability and mechanical behavior of PLLA/Mg composites processed by hot extrusion10.1016/j.msec.2016.11.037 ↗
20. Ab initio molecular dynamics of H2O adsorbed on solid MgO10.1063/1.470256 ↗
21. Magnetic nanoparticles for power absorption: Optimizing size, shape and magnetic properties10.1016/j.jssc.2009.07.047 ↗
22. Understanding dynamics of interacting magnetic nanoparticles: From the weak interaction regime to the collective superspin glass state10.1088/1742-6596/521/1/012006 ↗
24. The interplay between single particle anisotropy and interparticle interactions in ensembles of magnetic nanoparticles10.1039/C8CP03934H ↗
25. Poly(lactic acid)-based polymer composites with high electric and thermal conductivity and their characterization10.1016/j.polymertesting.2016.12.033 ↗
26. Dinçer, I., and Zamfirescu, C. (2016). Appendix B Drying Phenomena: Theory and Applications, John Wiley & Sons Ltd.. [1st ed.].10.1002/9781118534892 ↗
27. Effect of crystalline forms (α′and α) of poly(lactic acid) on its mechanical, thermo-mechanical, heat deflection temperature and creep properties10.1016/j.eurpolymj.2016.07.024 ↗
28. Strain rate effect on semi-crystalline PLLA mechanical properties measured by instrumented indentation tests10.1016/j.eurpolymj.2014.07.034 ↗