Simple Scaling as a Tool to Help Assess the Closure-Free da/dN Versus ΔKeff Curve in a Range of Materials
Source abstract
Abstract
Recent studies have proposed a simple formula, which is based on Elber’s original approach to account for R-ratio effects, for determining the crack closure-free ΔKeff versus da/dN curve from the measured R-ratio-dependent ΔK versus da/dN curves. This approach, which is termed “Simple Scaling,” has been shown to collapse the various R-ratio-dependent curves onto a single curve. Indeed, this approach has been verified for a number of tests on metals, polymers, and a medium-entropy alloy. However, it has not yet been used to help assess/determine the closure-free ΔKeff versus da/dN curve. The current paper addresses this shortcoming and illustrates how to use this methodology to assess the ΔKeff versus da/dN curves given in the open literature for tests on a number of steels, aluminum alloys, STOA Ti-6Al-4V, a magnesium alloy, and Rene 95. As such, it would appear to be a useful tool for assessing fatigue crack growth.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centre of Expertise for Structural Mechanics, Department of Mechanical and Aerospace Engineering, Monash University, Clayton, VIC 3800, Australia
ARC Industrial Transformation Training Centre on Surface Engineering for Advanced Materials, Faculty of Science, Engineering and Technology, Swinburne University of Technology, John Street, Hawthorn, VIC 3122, Australia
Funding
US Army Research Laboratory
References (42)
Show source-provided references
1. (2023). Standard Test Method for Measurement of Fatigue Crack Growth Rates (Standard No. ASTM E647-23b).
2. Fatigue crack cyclic closure under cyclic tension10.1016/0013-7944(70)90028-7 ↗
3. Elber, W. (1971). The Significance of Crack Closure, ASTM International. ASTM STP 486.10.1520/STP26680S ↗
4. Service load fatigue damage—A historical perspective10.1016/S0142-1123(99)00054-7 ↗
5. Reflections on identifying the real ΔKeffective in the threshold region and beyond10.1016/j.engfracmech.2006.12.029 ↗
6. Fatigue of structures and materials in the 20th century and the state of the art10.1016/S0142-1123(03)00051-3 ↗
7. Fatigue crack growth and damage tolerance10.1111/ffe.12155 ↗
8. Some formulas for the crack opening stress level10.1016/0013-7944(81)90034-5 ↗
9. Newman, J.C. (1981). A Crack-Closure Model for Predicting Fatigue Crack Growth Under Aircraft Spectrum Loading, American Society for Testing and Materials. ASTM STP 748.10.1520/STP28334S ↗
10. A crack opening stress equation for fatigue crack growth
11. Crack propagation studies on Al7475 on the basis of constant amplitude and selective variable amplitude loading histories10.1111/j.1460-2695.1987.tb00210.x ↗
12. Unraveling the myth of closure corrections: Sharpening the definition of opening and closure stresses with an energy approach
13. Influence of stress ratio on fatigue crack growth in mild steel10.1016/0013-7944(95)91547-3 ↗
14. Application and discussion of various crack closure models to predict fatigue crack growth in 6061-T651 aluminium alloy10.1016/j.ijfatigue.2021.106472 ↗
15. Panontin, T.L., and Sheppard, S.D. (1988). An Evaluation of the adjusted compliance ratio technique for determining the effective stress intensity factor. 29th National Symposium on Fatigue and Fracture Mechanics, American Society for Testing and Materials. ASTM STP 1332.
16. An evaluation of ΔK estimation procedure on 6061-T6 and 2024-T3 aluminum alloys10.1016/S0142-1123(99)00055-9 ↗
17. On 50 years of fatigue crack closure dispute10.1111/ffe.14034 ↗
18. Challenging the “ΔKeff is the driving force for fatigue crack growth” hypothesis”10.1016/j.ijfatigue.2020.105577 ↗
19. Newman, J.C. (2021). Fatigue And Crack Growth under Constant and Variable-Amplitude Loading in 9310 Steel Using “Rainflow-on-the-Fly” Methodology. Metals, 11.10.3390/met11050807 ↗
20. Crack closure under high load ratio and Kmax test conditions10.1016/j.proeng.2010.03.008 ↗
21. Improved test method for very low fatigue-crack-growth-rate data10.1111/j.1460-2695.2010.01516.x ↗
22. The influence of corrosion pits on the fatigue life of 17-4PH steam turbine blade steel10.1016/j.engfracmech.2015.08.011 ↗
23. Thoughts on two approaches for accounting for the scatter in fatigue delamination growth curves10.1016/j.compstruct.2020.113175 ↗
24. Jones, R., Ang, A., Phan, N.D., and Nicholas, M. (2024). On the link between plastic wake induced crack closure and the fatigue threshold. Metals, 14.10.3390/met14050523 ↗
25. Jones, R., Kinloch, A.J., and Ang, A.S.M. (2024). Modelling Fatigue Crack Growth in High-Density Polyethylene and Acrylonitrile Butadiene Styrene Polymers. Polymers, 16.10.3390/polym16091299 ↗
26. Michel, S., Murphy, N., Kinloch, A.J., and Jones, R. (2004). On Cyclic-Fatigue Crack Growth in Carbon-Fibre-Reinforced Epoxy-Polymer Composites. Polymers, 16.10.3390/polym16030435 ↗
27. Bridging effect on Mode I fatigue delamination behavior in composite laminates10.1016/j.compositesa.2014.04.007 ↗
28. A modified Paris relation for fatigue delamination with fibre bridging in composite laminates10.1016/j.compstruct.2017.05.070 ↗
29. Effect of data reduction and fiber-bridging on Mode I delamination characterization of unidirectional composites10.1177/0021998313498791 ↗
30. Temperature effects on fatigue delamination behavior in thermoset composite laminates10.1016/j.engfracmech.2023.109799 ↗
31. Testing and evaluation for fatigue crack growth rates of Ti-6Al-4V/ELI and 7050-T7452 alloys at high temperatures10.1016/j.cja.2017.06.013 ↗
32. Effect of test frequency on fatigue crack growth rates of Ti-6Al-4V Eli alloy at cryogenic temperatures10.1063/1.2192346 ↗
33. Effect of load ratio and maximum stress intensity on the small crack fatigue threshold in Ti-6Al-4V10.1016/S0013-7944(00)00099-0 ↗
34. Newman, J.C., Vizzini, A.J., and Yamada, Y. (2013). Fatigue Crack Growth Databases and Analyses for Threshold Behavior in Rotorcraft Materials, Office of Research and Technology Development. DOT/FAA/AR-10/3.
35. Newman, J.C. (2007). Analyses of Fatigue Crack Growth Databases for Use in a Damage Tolerance Approach for Aircraft Propellers and Rotorcraft, Office of Research and Technology Development. DOT/FAA/AR-07/49.
36. An integrated methodology for separating closure and residual stress effects from fatigue crack growth rate data10.1111/j.1460-2695.2006.01081.x ↗
37. Fatigue-crack growth in two aluminium alloys and crack-closure analyses Under constant-amplitude and spectrum loading10.1016/j.tafmec.2019.01.029 ↗
38. Fatigue crack growth behavior in a Mn-Cr austenitic steel10.1016/0013-7944(87)90074-9 ↗
39. Newman, J.A., and Piascik, R.S. (2024, November 04). Near-Threshold Fatigue Crack Growth Behavior of Fine-Grain Nickel-Based Alloys, NASA/TM-2003-212443, Langley Research Centre, August 2003, Available online: https://ntrs.nasa.gov/citations/20030067932.
40. Jones, R., Ang, A., Peng, D., Champagne, V.K., Michelson, A., and Birt, A. (2023). Modelling Crack Growth in Additively Manufactured Inconel 718 and Inconel 625. Metals, 13.10.3390/met13071300 ↗
41. Jones, R., Ang, A., Aston, R.W., Schoenborn, N.D., Champagne, V.K., Peng, D., and Phan, N.D. (2024). On the Growth of Small Cracks in 2024-T3 and Boeing Space, Intelligence and Weapon Systems AM LPBF Scalmalloy®. Fatigue Fract. Eng. Mater. Struct., 1–13.10.1111/ffe.14468 ↗
42. Jones, R., Rans, C., Iliopoulos, A.P., Michopoulos, J.G., Phan, N., and Peng, D. (2021). Modelling the Variability and the Anisotropic Behaviour of Crack Growth in SLM Ti-6Al-4V. Materials, 14.10.3390/ma14061400 ↗