Study on Dynamic Mechanical Properties of Low-Alloy, High-Strength Steel Weld Metal at High Temperatures
Source abstract
Abstract
To investigate the dynamic mechanical properties of low-alloy, high-strength steel weld metal at high temperatures, the temperature distribution equation and boundary conditions of weld metal during welding were determined. A steady-state temperature distribution model of weld metal heat loss was constructed by combining the heat loss equation and the heat source loss equation. Subsequently, a weld with Q960E high-strength steel extruded plate was used as the base material to investigate the dynamic mechanical properties of the weld metal at high temperatures. The experimental results show that the weld seam is the weakest region of the whole welded joint, and with the increase in temperature, the yield strength and tensile strength of the welded joints decrease. Heat treatment technology at high temperatures can significantly change the weld tensile strength of Q960E high-strength steel, and solid solution + aging treatment can optimize the mechanical properties of the heat-affected zone. We observed the short-term persistence of high-temperature metal at 600 °C/199 MPa and 650 °C/118 MPa; except for one 118 MPa short-term endurance test at high temperature, most samples qualified. With the increase in annealing temperature from 830 °C, the yield strength and tensile strength of the samples decreased significantly, and elongation after break increased dramatically.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
Central Iron & Steel Research Institute, Beijing 100081, China
References (21)
Show source-provided references
1. Ammonia mitigation and induction effects on hydrogen environment embrittlement of SCM440 low-alloy steel10.1016/j.ijhydene.2022.03.006 ↗
2. Effect of ER5356 Welding Wire on Microstructure and Mechanical Properties of 5083 Aluminum Alloy GTAW Welded Joint10.5957/JSPD.10200026 ↗
3. Coupled propagation behavior of multiple fatigue cracks in welded joints of steel-bridge10.1016/j.jcsr.2024.108532 ↗
4. Effects of Ar-He shielding gas mixture on mechanical and metallurgical properties of weld metal in laser welding of 6061 T6 aluminium alloy10.2351/7.0000414 ↗
5. Mechanical and microstructural characterization of friction stir welded AA6061-T6 joints reinforced with nano-sized particles10.1016/j.matchar.2019.110047 ↗
6. Study on Thermal-Stress Coupling Simulation of Weldnents of Large Structures
7. Effect of welding defects on mechanical properties of welded joints subjected to temperature
8. Effects of different post-weld heat treatment conditions on mechanical properties and microstructure of welded joints10.1142/S0217979222400513 ↗
9. Investigations on the weld metal composition and associated weld metal cracking in laser beam welded steel copper dissimilar joints10.1016/j.jmatprotec.2021.117178 ↗
10. A New Heat Source Model for Keyhole Mode Laser Welding10.1115/1.4051122 ↗
11. An adaptive wavelet collocation method for the optimal heat source problem10.1108/HFF-04-2021-0284 ↗
12. Effect of Nb on the microstructural evolution and microhardness of Super304H austenitic stainless steel weld metals during long-term aging10.1515/ijmr-2021-8263 ↗
13. 3D finite element analysis and optimization of welding residual stress in the girth joints of X80 steel pipeline10.1016/j.jmapro.2021.04.009 ↗
14. Measurements of residual stresses in a welded orthotropic steel deck by the hole-drilling method considering stress biaxiality10.1016/j.engstruct.2020.111690 ↗
15. Investigation of welding parameters effects on temperature field and structure field during laser-arc hybrid welding10.1142/S0217984921504674 ↗
16. Evaluation of the effect of filler metal interlayer on the weld joint quality in fiber laser welding of alloy steel (A516)10.2351/7.0000580 ↗
17. Crystal Structure Control of Binary and Ternary Solid-Solution Alloy Nanoparticles with a Face-Centered Cubic or Hexagonal Close-Packed Phase10.1021/jacs.2c00583 ↗
18. Comparison between methods measuring arc efficiency of gas tungsten arc welding10.1080/13621718.2021.1921101 ↗
19. An assessment of microstructure and mechanical properties of inconel 601/304 stainless steel dissimilar weld10.1016/j.vacuum.2020.109970 ↗
20. Effect of the welding technique on mechanical properties and metallurgical characteristics of the naval grade high strength low alloy steel joints produced by SMAW and GMAW10.1016/j.cirpj.2022.03.007 ↗
21. (2024). Welding and Brazing Sampling Method for Process Evaluation (Standard No. GB-2651-2024).