journal article·2025-11-28Open access

Microwave-Crosslinked Polymer Binder MA-AANa/D Biodegradable in an Aqueous Environment–Selected Own Research

Beata Grabowska, Artur Bobrowski, Mateusz Skrzyński, Grzegorz Grabowski, Wojciech Żyłka, Barbara Pilch-Pitera

Materials· Volume 18· Issue 23

Abstract

The article presents a series of studies on a new polymer binder in the form of an aqueous composition of MA-AANa/D in the aspect of its reusability in the casting process and its safe storage in landfills. FT-IR analysis confirmed that microwave radiation induces crosslinking of both the MA-AANa/D binder and the moulding sand containing it. It was found that after simple treatment of the microwave-cured binder, its original binding properties can be restored, as the hydrogen-bond networks formed under microwave irradiation are reversible. The bending strength (Rgu) tests of both fresh and regenerated moulding sands bonded with MA-AANa/D confirmed that the achieved curing degree meets the requirements for mould and core production. In addition, the biodegradability of the MA-AANa/D binder was evaluated using the Zahn-Wellens test. The progressive biodegradation was monitored through chemical oxygen demand (UV-Vis) measurements and the corresponding biodegradation degree (Rt). The results confirmed that MA-AANa/D is fully biodegradable in aqueous environments, as evidenced by an Rt value of 63.5% after 28 days of testing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Materials Engineering and Processing · Nanocomposite Films for Food Packaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Faculty of Foundry Engineering, Department of Foundry Process Engineering, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, AGH University of Krakow, al. A. Mickiewicza 30, 30-059 Krakow, Poland

Faculty of Exact and Technical Sciences, Institute of Materials Engineering, University of Rzeszow, ul. Pigonia 1, 35-310 Rzeszow, Poland

Faculty of Chemistry, Department of Polymers and Biopolymers, Rzeszow University of Technology, al. Powstańców Warszawy 12, 35-029 Rzeszow, Poland

Funding

AGH University of Krakow

References (40)

Show source-provided references
1. Towards Planet Proof Computing: Law and Policy of Data Centre Sustainability in the European Union
2. Europe’s environmental dichotomy: The impact of regulations, climate investments, and renewable energy on carbon mitigation in the EU-2210.1016/j.enpol.2025.114498 ↗
3. Polymer recycling considering current and future legal regulations in selected EU countries—A review10.14314/polimery.2025.6.2 ↗
4. Chanda, M., and Salil, R.K. (2008). Industrial Polymers, Specialty Polymers and Their Applications, Taylor & Francis Group.10.1201/9781420080599 ↗
5. Rabek, J.F. (2019). Polimery. Otrzymywanie, Metody Badawcze i Zastosowania, Wydawnictwo Naukowe PWN.
6. Lewandowski, J.L. (1997). Tworzywa Na Formy Odlewnicze, Akapit.
7. Holtzer, M., Dańko, R., Piasny, S., Kubecki, M., Drożyński, D., Roczniak, A., Skrzyński, M., and Kmita, A. (2021). Research on the Release of Dangerous Compounds from the BTEX and PAHs Groups in Industrial Casting Conditions. Materials, 14.10.3390/ma14102581 ↗
8. Selection criteria of lustrous carbon carriers in the aspect of properties of greensand system
9. Transformation of bentonite used in green sand molds during metal casting process and its relevance in sand reclamation10.1016/j.clay.2021.106072 ↗
10. The Effect of the Addition of Bentonite Clay to Traditional Sand Mixtures on the Surface Quality of Iron Castings10.12911/22998993/112505 ↗
11. Environmentally Friendly Foundry Molding and Core Sands10.1007/s11665-019-03947-x ↗
12. Physico-Chemical and Environmental Characterisation of the Dust from Dry Dedusting of the Green Sand10.1515/afe-2016-0079 ↗
13. Analysis of Chemically Bonded Sand Used for Molding in Foundry10.51983/ajsat-2018.7.1.1025 ↗
14. Effects of Additives on Some Selected Properties of Base Sand
15. Formation and control of lustrous carbon surface defects in iron and steel castings
16. Influence of Lustrous Carbon Defects on the Fatigue Life of Ductile Iron Castings Using Lost Foam Process10.1016/j.matdes.2010.06.015 ↗
17. Green Sand Emissions and the Concentration of Carbonaceous Additives|Modern Casting
18. The high-temperature resistant mechanism of α-starch composite binder for foundry10.1016/j.jmatprotec.2009.04.010 ↗
19. The Environmental Performance and Cost of Innovative Technologies for Ductile Iron Foundry Production
20. Preparation and experiments for a novel kind of foundry core binder made from modified potato starch10.1016/j.matdes.2008.03.017 ↗
21. Synthesis and Application of Modified Starch as a Shell-Core Main Adhesive in a Foundry10.1002/app.31781 ↗
22. The influence of biomaterial in the binder composition on the quality of reclaim from furan no-bake sands
23. Grabowska, B. (2013). Nowe Spoiwa Polimerowe w Postaci Wodnych Kompozycji z Udziałem Poli(Kwasu Akrylowego) Lub Jego Soli i Modyfikowanego Biopolimeru do Zastosowania w Odlewnictwie, AKAPIT.
24. Grabowska, B., Cukrowicz, S., Bobrowski, A., Drożyński, D., Żymankowska-Kumon, S., Kaczmarska, K., Tyliszczak, B., and Pribulová, A. (2023). Organobentonite Binder for Binding Sand Grains in Foundry Molding Sands. Materials, 16.10.3390/ma16041585 ↗
25. Cukrowicz, S., Sitarz, M., Kornaus, K., Kaczmarska, K., Bobrowski, A., Gubernat, A., and Grabowska, B. (2021). Organobentonites Modified with Poly(Acrylic Acid) and Its Sodium Salt for Foundry Applications. Materials, 14.10.3390/ma14081947 ↗
26. Biodegradation of new polymer foundry binders for the example of the composition polyacrylic Acid/Starch
27. Thermal decomposition of binder based on etheri ed starch to use in foundry industry10.1007/s10973-017-6451-9 ↗
28. Research on Reclamation and Activation of Moulding Sands Containing Water-Glass Hardened with Microwaves10.2478/afe-2014-0046 ↗
29. Effect of Sand Wetting on Physically Hardened Moulding Sands Containing a Selected Inorganic Binder. Part 110.1515/afe-2016-0006 ↗
30. Studies on the renewability of polymeric binders for foundry10.2478/v10266-012-0078-x ↗
31. FT-IR and FT-Raman studies of cross-linking processes with Ca2+ ions, glutaraldehyde and microwave radiation for polymer composition of poly(acrylic acid)/sodium salt of carboxymethyl starch—Part I10.1016/j.saa.2014.07.031 ↗
32. FT-IR and FT-Raman studies of cross-linking processes with Ca2+ ions, glutaraldehyde and microwave radiation for polymer composition of poly(acrylic acid)/sodium salt of carboxymethyl starch—In moulding sands, Part II10.1016/j.saa.2015.06.084 ↗
33. (1984). Foundry Moulding Materials. Strength Measurement (Standard No. PN-83/H-11073).
34. (2005). Jakość Wody. Oznaczenie Całkowitej Biodegradacji Tlenowej Związków Organicznych w Środowiskuwodnym. Test Statyczny (Metoda Zahna-Wellensa) (Standard No. PN-EN ISO 9888).
35. (2005). Jakość Wody. Oznaczanie Indeksu Chemicznego Zapotrzebowania Tlenu (SP-ChZT). Metoda Zminiaturyzowana z Zastosowaniem Szczelnych Probówek (Standard No. PN ISO 15705).
36. Effect of Sand Base Grade and Density of Moulding Sands with Sodium Silicate on Effectiveness of Absorbing Microwaves10.1515/afe-2016-0059 ↗
37. Effect of Microwave Heating on Moulding Sand Properties with Gypsum Binder10.1515/afe-2017-0098 ↗
38. Determination of Binder Content in Traditional Sandmixes by Microwave Method
39. Microwave-Hardened Moulding Sands with Hydrated Sodium Silicate for Modified Ablation Casting10.24425/afe.2019.127122 ↗
40. Anwar, N., Jalava, K., and Orkas, J. (2025). Microwave Hardening of Solid Inorganic Foundry Binder. Int. J. Met., e00666.10.1007/s40962-025-01638-z ↗