journal article·2012-11

An embedded multi‐parameter corrosion sensor for reinforced concrete structures

H. Yu, L. Caseres

Materials and Corrosion· Volume 63· Issue 11
Publisher page

Abstract

Abstract A prototype of an embedded corrosion sensor has been developed for assessing the corrosion status of reinforcing steel bar (rebar) in concrete. The integrated sensor unit includes an Ag/AgCl probe, a metallic oxide probe, a multi‐electrode array sensor (MAS), and a four‐pin (Wenner) array stainless steel electrode for chloride content, pH, microcell corrosion current, and localized concrete resistivity measurements, respectively. A stable solid probe was used as the reference probe in this unit to express the potentiometric measurement of chloride content and pH probes. In this study, the chloride and pH probes were calibrated in simulated pore solutions (SPSs) regarding temperature and pH fluctuations. The corrosion current results of the MAS probe in SPSs matched very well with those obtained by the linear polarization resistance technique, which was conducted on companion carbon steel specimens. A sensor prototype was embedded into a paste cylinder for long‐term performance evaluation. Up‐to‐date results show that the sensor probes exhibit excellent sensitivity and reliability through 1 year of monitoring. Continuous monitoring in the laboratory for extended periods is underway.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Concrete Corrosion and Durability · Smart Materials for Construction · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 10.1002/maco.20090528810.1002/maco.200905288 ↗
2. 10.1002/maco.20090527310.1002/maco.200905273 ↗
3. 10.1002/maco.20039009510.1002/maco.200390095 ↗
4. 10.1002/maco.20060401810.1002/maco.200604018 ↗
5. 10.1016/S0008-8846(00)00265-910.1016/S0008-8846(00)00265-9 ↗
6. 10.1016/S0013-4686(02)00283-910.1016/S0013-4686(02)00283-9 ↗
7. 10.1016/S0010-938X(97)00009-710.1016/S0010-938X(97)00009-7 ↗
8. 10.1002/maco.20039005110.1002/maco.200390051 ↗
9. 10.1002/maco.20090534610.1002/maco.200905346 ↗
10. R. G.Kelly S. H.Jones FHWA/VTRC 00‐CR1 Final Report U.S.1999.
11. R. A.Reis M.Gallaher FHWA/CA/TL‐2003/07/ECI‐1 Final Report U.S.2006.
12. M. F.Montemor J. H.Alves A. M. P.Simões J. C. S.Fernandes Z.Lourenço A. S.Costa A. J.Appleton M. G. S.Ferreira Presented at16th International Corrosion Congress Beijing China September 19–24 2005.
13. D. G.Watters A. J.Bahr P.Jayaweera D. L.Huestis FHWA/CA/TL‐2003/07 Final Report U.S.2003.
14. Andringa M. M. · 4th IEEE International Confrence
15. Srinivasan R. · IEEE Instrum. Meas. Mag. · 2003 · 6 · 19
16. 10.1109/JSEN.2007.90823010.1109/JSEN.2007.908230 ↗
17. Myrdal R. · 2007
18. R. G.Hu C. J.Lin B.Zhao R. G.Du Presented at16th International Corrosion Congress Beijing China September 19–24 2005.
19. 10.1016/j.electacta.2008.08.02510.1016/j.electacta.2008.08.025 ↗
20. 10.5006/1.329215110.5006/1.3292151 ↗
21. L.Yang N.Sridhar O.Pensado Proceedings of the Extended Abstract Vol. I The Electrochemical Society Washington DC 2001 p.182 Abstract #182.
22. L.Yang D. S.Dunn AtNACE CORROSION'02 Denver Colorado 2002 Paper No. 02004.
23. 10.5006/1.328078910.5006/1.3280789 ↗
24. Yang L. · Mater. Perform. · 2003 · 42 · 48
25. 10.1016/S0010-938X(98)00120-610.1016/S0010-938X(98)00120-6 ↗
26. L.Yang N.Sridhar G.Cragnolino in:Proceedings of the NACE International Houston Texas 2002 Paper No. 02545.
27. A.Anderko N.Sridhar C. S.Brossia D. S.Dunn L. T.Yang AtNACE CORROSION'03 San Diego CA 2003 Paper No. 03375.
28. L.Caseres Master Thesis University of South Florida Florida U.S.2002.