journal article·2019-07

The combination of minimally invasive electrochemical investigations and FTIR‐spectroscopy to analyze atmospheric corrosion product layers on zinc

Ulrike Langklotz, Martin Babutzka, Michael Schneider, Andreas Burkert

Materials and Corrosion· Volume 70· Issue 7
Publisher page

Abstract

The present work describes the combination of electrochemical investigations by using a gel‐type electrolyte with Fourier‐transformed infrared spectroscopy to investigate partially extremely thin corrosion product films on titanium‐zinc. The gel pad method enables the determination of corrosion relevant parameters such as the potential and the linear polarization resistance without altering the corrosion product layers, which are extremely prone to re‐dissolution when freshly formed. Complementary infrared spectroscopy enables the determination of main compounds of even very thin surface layers of few tenth of nanometers with a certain lateral resolution. It was found that zinc forms mostly zinc carboxy‐hydroxides such as hydrozincite, under various exposure conditions. The protective properties of these hydrozincite layers depend on the structure of the corrosion product film rather than on its thickness. In mid‐term exposure tests, shallow corrosion pits were found even in the absence of corrosive agents such as chloride.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

TU Dresden, Institute of Material Science Helmholtzstr. 7, 01062 Dresden Germany

Bundesanstalt für Materialforschung und ‐prüfung (BAM), Division 7.6 Corrosion and Corrosion Protection Unter den Eichen 87, 12205 Berlin Germany

Fraunhofer IKTS Winterbergstraße 28, 01277 Dresden Germany

References (42)

Show source-provided references
1. U.S. Geological Survey Mineral commodity summaries2018 pp.191–192 https://doi.org/10.3133/70194932.10.3133/70194932 ↗
2. 10.5006/245810.5006/2458 ↗
3. 10.1002/maco.1975026060510.1002/maco.19750260605 ↗
4. 10.1002/978111876213410.1002/9781118762134 ↗
5. 10.1016/j.corsci.2013.10.02910.1016/j.corsci.2013.10.029 ↗
6. 10.1016/0010-938X(93)90082-R10.1016/0010-938X(93)90082-R ↗
7. 10.1002/maco.1980031110210.1002/maco.19800311102 ↗
8. 10.1016/j.corsci.2013.05.01110.1016/j.corsci.2013.05.011 ↗
9. 10.1016/S0010-938X(00)00066-410.1016/S0010-938X(00)00066-4 ↗
10. 10.1016/j.corsci.2017.08.00110.1016/j.corsci.2017.08.001 ↗
11. 10.1016/j.corsci.2017.06.02510.1016/j.corsci.2017.06.025 ↗
12. 10.1016/S0010-938X(02)00076-810.1016/S0010-938X(02)00076-8 ↗
13. 10.1016/j.electacta.2005.08.03010.1016/j.electacta.2005.08.030 ↗
14. 10.1016/j.electacta.2006.06.01410.1016/j.electacta.2006.06.014 ↗
15. 10.1016/j.elecom.2014.01.01610.1016/j.elecom.2014.01.016 ↗
16. 10.1016/0010-938X(88)90101-110.1016/0010-938X(88)90101-1 ↗
17. 10.1016/j.corsci.2013.04.04010.1016/j.corsci.2013.04.040 ↗
18. 10.1002/maco.20150831210.1002/maco.201508312 ↗
19. 10.1088/1757-899X/181/1/01202110.1088/1757-899X/181/1/012021 ↗
20. 10.1002/maco.1982033120410.1002/maco.19820331204 ↗
21. 10.1209/0295-5075/109/2600210.1209/0295-5075/109/26002 ↗
22. 10.1149/1.183820710.1149/1.1838207 ↗
23. 10.1016/0013-4686(79)87048-610.1016/0013-4686(79)87048-6 ↗
24. 10.1016/j.electacta.2003.10.01210.1016/j.electacta.2003.10.012 ↗
25. 10.1016/0013-4686(64)80044-X10.1016/0013-4686(64)80044-X ↗
26. Heitz E. · 1990 · 238
27. 10.1016/S0010-938X(00)00136-010.1016/S0010-938X(00)00136-0 ↗
28. 10.1063/1.55590910.1063/1.555909 ↗
29. 10.1002/sia.591310.1002/sia.5913 ↗
30. 10.4236/msa.2011.2504410.4236/msa.2011.25044 ↗
31. 10.1002/pssc.20067216410.1002/pssc.200672164 ↗
32. 10.1139/v67-09710.1139/v67-097 ↗
33. 10.1016/j.tsf.2012.09.07510.1016/j.tsf.2012.09.075 ↗
34. 10.1016/S1386-1425(01)00677-110.1016/S1386-1425(01)00677-1 ↗
35. Dimitriev Y. · J. Univ. Chem. Technol. Metallurgy · 2011 · 46 · 243
36. 10.1016/j.apsusc.2012.04.07310.1016/j.apsusc.2012.04.073 ↗
37. 10.1016/S0010-938X(98)00176-010.1016/S0010-938X(98)00176-0 ↗
38. 10.1016/j.corsci.2006.08.00310.1016/j.corsci.2006.08.003 ↗
39. 10.1149/1.183875310.1149/1.1838753 ↗
40. 10.5006/1.328051410.5006/1.3280514 ↗
41. EN ISO 8044: Corrosion of metals and alloys − Basic terms and definitions 2015.
42. 10.1016/S0009-2541(02)00263-210.1016/S0009-2541(02)00263-2 ↗