journal article·2019-10

Influence of grinding parameters on the corrosion behavior of austenitic stainless steel

Steffi Reinemann, Paul Rosemann, Martin Babutzka, Jens Lehmann, Andreas Burkert

Materials and Corrosion· Volume 70· Issue 10
Publisher page

Abstract

Abstract Samples of the austenitic stainless steel grade X5CrNi18‐10 (1.4301, AISI 304) were ground industrially with various grinding parameters to study their influence on corrosion resistance. The ability of the mechanically ground surfaces to form a stable passive layer was evaluated by KorroPad test and a modified electrochemical potentiodynamic reactivation test based on a single loop (EPR‐SL). Furthermore, the surfaces were characterized by surface analytical methods. The main influence was determined regarding abrasive belt type. Surfaces mechanically ground with granulate abrasive belts constantly had a lower corrosion resistance than surfaces ground with single‐coated grain. The granulate abrasive belts generated more sensitized surface areas and left formations of welded sample material on the mechanically ground surfaces. A post‐treatment with a nonwoven abrasive proved to be an effective finishing process by which the surface defects and sensitized material got removed and the surfaces regained the expected corrosion resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Division 7.6 Corrosion and Corrosion Protection Bundesanstalt für Materialforschung und ‐prüfung (BAM) Berlin Germany

Institut für Werkstoff und Fügetechnik (IWF) Otto‐von‐Guericke‐Universität Magdeburg Magdeburg Germany

Funding

Allianz Industrie Forschung

References (17)

Show source-provided references
1. Göllner J. · 2008 · 36
2. 10.1016/0010-938X(77)90036-110.1016/0010-938X(77)90036-1 ↗
3. Heyn A. · 2008 · 46
4. 10.1002/maco.1995046020610.1002/maco.19950460206 ↗
5. Faller M. · 2008 · 74
6. 10.1002/maco.20040384610.1002/maco.200403846 ↗
7. 10.1002/maco.1981032030310.1002/maco.19810320303 ↗
8. 10.1016/S0010-938X(02)00215-910.1016/S0010-938X(02)00215-9 ↗
9. 10.1016/S0010-938X(97)00072-310.1016/S0010-938X(97)00072-3 ↗
10. 10.1002/maco.20040381710.1002/maco.200403817 ↗
11. 10.1002/maco.20120674910.1002/maco.201206749 ↗
12. A.Hörtnagl P.Gümpel NACE International Corrosion Conference & Expo2017 Paper No. 9356 1.
13. R.Morach Ph.D. Thesis Eidgenössische Technische Hochschule Zürich 1994.
14. Schlussbericht AiF‐Forschungsvorhaben IGF‐Nr. 17136 N/1 Bundesanstalt für Materialforschung und ‐prüfung (BAM) Berlin 2014.
15. DIN EN 10088‐1 Beuth Verlag GmbH Berlin 2014.
16. J.Lehmann A.Burkert U.‐M.Steinhoff German Patent Nr.DE 10 2010 037 775 2014.
17. 10.1002/maco.20140820210.1002/maco.201408202 ↗