Detection of Grinding‐Induced Corrosion Susceptibility of Austenitic Stainless Steel 316 L Using Electrochemical and Analytical Methods
Source abstract
Abstract
ABSTRACT The austenitic stainless steel AISI 316 L was ground using industrially common grinding belts to investigate the corrosion resistance of the resulting surfaces. Although all grinding belts produced comparable ground surfaces, differences in corrosion resistance were detected. The cause of the local corrosion susceptibility was identified and quantified using electrochemical and surface analytical methods. During grinding with granular abrasive belts, steel particles are generated, which become highly heated through friction in the grinding process and consequently fuse locally with the steel surface. These resulting particles form defects in the ground surface with critical crevice geometries, preventing the formation of the protective passive layer. These surface defects were identified as the starting points of local corrosion processes. The critical defects occur particularly when using the so‐called granular abrasive belts and are attributed to their special surface topography, which causes significant localization of the grinding processes. A higher corrosion resistance was achieved with single‐layered abrasive belts that have a more uniform topography.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Hochschule für Technik, Wirtschaft und Kultur Leipzig Leipzig Germany
Otto‐von‐Guericke University Magdeburg Magdeburg Germany
DeltaSigma Analytics GmbH Magdeburg Germany
IFA‐Technologies GmbH, Advanced Technologies Magdeburg Germany
References (28)
Show source-provided references
1. Göllner J. · 2008 · 36
2. Heyn A. · 2008 · 46
3. 10.5006/1.329360310.5006/1.3293603 ↗
4. 10.1016/S0010-938X(96)00066-210.1016/S0010-938X(96)00066-2 ↗
5. 10.1016/S0010-938X(97)00072-310.1016/S0010-938X(97)00072-3 ↗
6. 10.1002/maco.20040381710.1002/maco.200403817 ↗
7. 10.1002/maco.20120674910.1002/maco.201206749 ↗
8. R. Lage P. Møller and H. E. Fallesen “The Effect of Surface Treatment and Topography on Corrosion Behavior of EN 1.4404 Stainless Steel ”Materials and Corrosion66 (2015): 1060–1067.10.1002/maco.201407854 ↗
9. A.Burkert A.Burkert J.Lehmann T.Müller andT.Bohlmann “Detektion korrosionsempfindlicher Oberflächen nichtrostender Stähle durch die Verarbeiter ” Final Report AiF‐Forschungsvorhaben IGF‐Nr. 17136 N/1 (2014).
10. 10.1002/maco.20191087410.1002/maco.201910874 ↗
11. 10.1002/maco.1995046020610.1002/maco.19950460206 ↗
12. Faller M. · 2008 · 74
13. 10.1002/maco.20040384610.1002/maco.200403846 ↗
14. 10.1002/maco.1981032030310.1002/maco.19810320303 ↗
15. A.HörtnaglandP.Gümpel “Electrochemical Characterization of Metstable Austenitic Stainless Steels to Illustrate the Influence of Grinding Parameters on the Corrosion Resistance ” paper presented at the Proceedings of the NACE International Corrosion Conference & Expo 2017 New Orleans USA 26–30 March 2017. Paper No. NACE‐2017‐9356.10.5006/C2017-09356 ↗
16. R.Morach “Zur Entstehung lokaler Korrosionsangriffe auf passiven Metallen” (PhD Thesis Eidgenössische Technische Hochschule Zürich 1994).
17. DIN EN 10088‐1:2014‐12 “Stainless steels ‐ Part 1: List of Stainless Steels ” German version EN 10088‐1:2014.
18. A.Burkert S.Reinemann J.Lehmann P.Rosemann T.Bohlmann andM.Babutzka “Optimierung industrieller Korundschleifprozesse zur Sicherstellung der Korrosionsbeständigkeit nichtrostender Stähle ” Final Report AiF‐Forschungsvorhaben IGF‐Nr. 18823 N/1 (2018).
19. J.Lehmann A.Burkert andU. M.Steinhoff “Auflage für den Nachweis von korrosionsempfindlichen Metalloberflächen und Verfahren zum Nachweis von korrosionsempfindlichen Metalloberflächen ” German Patent DE 10 2010 037 775 (2012).
20. 10.1002/maco.20140820210.1002/maco.201408202 ↗
21. 10.1002/maco.20160889310.1002/maco.201608893 ↗
22. 10.3139/105.11019510.3139/105.110195 ↗
23. 10.1002/maco.20130727610.1002/maco.201307276 ↗
24. 10.1002/maco.20140786110.1002/maco.201407861 ↗
25. 10.3139/105.11031710.3139/105.110317 ↗
26. 10.1002/maco.20140808110.1002/maco.201408081 ↗
27. 10.1016/j.electacta.2019.05.08110.1016/j.electacta.2019.05.081 ↗
28. P.Rosemann C.Müller O.Baumann W.Modersohn andT.Halle “Influence of the Post‐Weld Surface Treatment on the Corrosion Resistance of the Duplex Stainless Steel 1.4062 ” inIOP Conference Series: Materials Science and Engineering Vol 181 (IOP Publishing Ltd. 2017).10.1088/1757-899X/181/1/012019 ↗