journal article·2019-08

Hot corrosion Type II of FeCr‐based model alloys for boiler and heat exchanger applications

Till König, Xabier Montero, Mathias C. Galetz

Materials and Corrosion· Volume 70· Issue 8
Publisher page

Abstract

The hot corrosion Type II of the alloys FeCr20, FeCr20Ni10, FeCr20Ni20, and FeCr20Co10 is investigated at 700°C in air + 0.5% SO2 with deposits consisting of Na2SO4 and a eutectic mixture of Na2SO4 and MgSO4 for 24, 100, and 300 h. The alloying elements nickel and cobalt have a positive influence when tests are conducted using a MgSO4‐Na2SO4 deposit. In this case, they reduce the metal loss and increase the time to the propagation stage. In contrast, when the alloys are exposed with a Na2SO4 deposit, these alloying elements increase the metal loss and allow for the transition to the propagation stage because they can form molten phases with the Na2SO4. During the incubation stage an oxide scale forms on the FeCr20 alloy, which is thicker than the one formed during exposure without a deposit, and iron oxides are observed, which precipitate in the deposit. The propagation stage occurs by a dissolution and precipitation mechanism forming localized pitting attack. Iron is the main species that dissolves and precipitates, while chromium remains mainly as an oxide beneath the initial surface. The additional elements are found in the pit and in the salt deposit.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

High Temperature Materials DECHEMA‐Forschungsinstitut Theodor‐Heuss‐Allee 25 60486 Frankfurt/Main Germany

Funding

Bundesministerium für Wirtschaft und Energie

References (48)

Show source-provided references
1. 10.1179/1743284712Y.000000013310.1179/1743284712Y.0000000133 ↗
2. 10.1007/s11085-015-9538-310.1007/s11085-015-9538-3 ↗
3. 10.1016/j.fuel.2011.03.01010.1016/j.fuel.2011.03.010 ↗
4. Simms N. J. · Forschungszentrum Jülich GmbH, Jülich · 2010
5. F.Lüttschwager Ph.D. Thesis RWTH Aachen Germany 2011.
6. 10.1007/s11085-016-9684-210.1007/s11085-016-9684-2 ↗
7. 10.1016/j.egypro.2014.07.01510.1016/j.egypro.2014.07.015 ↗
8. Viswanathan R. · Proc. 2000 Int. Joint Pow. Gen. Conf. IJPGC2000 · 2000 · 1
9. Holcomb G. R. · 2011
10. 10.1007/s11085-011-9254-610.1007/s11085-011-9254-6 ↗
11. K.Yoshikawa A.Iseda H.Teranishi F.Masuyama T.Daikoku H.Haneda High Temperature Alloys: Their Exploitable Potential Elsevier Applied Science London New York1987.
12. 10.1149/1.212937510.1149/1.2129375 ↗
13. 10.1007/BF0264279410.1007/BF02642794 ↗
14. 10.1149/1.211394410.1149/1.2113944 ↗
15. 10.1149/1.211394310.1149/1.2113943 ↗
16. 10.1149/1.212937410.1149/1.2129374 ↗
17. 10.1149/1.210864810.1149/1.2108648 ↗
18. 10.1149/1.212430510.1149/1.2124305 ↗
19. 10.1016/S0010-938X(01)00060-910.1016/S0010-938X(01)00060-9 ↗
20. Shi L. Q. · J. Chin. Soc. Corr. Prot. · 1992 · 12 · 20
21. Rapp R. A. · Proc. – Electrochem. Soc. · 1981 · 1981 · 159
22. 10.1007/BF0264784210.1007/BF02647842 ↗
23. 10.1007/s11085-015-9588-610.1007/s11085-015-9588-6 ↗
24. 10.1016/j.corsci.2018.06.00910.1016/j.corsci.2018.06.009 ↗
25. 10.1016/j.corsci.2015.08.02910.1016/j.corsci.2015.08.029 ↗
26. 10.1007/s11085-018-9853-610.1007/s11085-018-9853-6 ↗
27. 10.1149/1.208664710.1149/1.2086647 ↗
28. 10.1016/0921-5093(89)90751-X10.1016/0921-5093(89)90751-X ↗
29. 10.1149/1.208643610.1149/1.2086436 ↗
30. 10.1007/s11085-013-9395-x10.1007/s11085-013-9395-x ↗
31. 10.1002/maco.20130742510.1002/maco.201307425 ↗
32. 10.1007/BF0065683510.1007/BF00656835 ↗
33. 10.1007/s11085-017-9831-410.1007/s11085-017-9831-4 ↗
34. 10.1017/CBO978113916390310.1017/CBO9781139163903 ↗
35. Kofstad P. · 1988
36. 10.1149/1.210852710.1149/1.2108527 ↗
37. 10.1007/BF0283337810.1007/BF02833378 ↗
39. R.Bürgel H. J.Maier T.Niendorf Handbuch Hochtemperatur‐Werkstofftechnik Vieweg+Teubner Wiesbaden 2011.10.1007/978-3-8348-9907-1 ↗
40. E.Kistler W.‐T.Chen G.Meier B.Gleeson presented at EFC Workshop 2018 Frankfurt am Main Germany 26–28 September 2018 p. 1.
41. Grzesik Z. · High Temp. Mater. Processes · 2012 · 31 · 53910.1515/htmp-2012-0091 ↗
42. Schütze M. · 2011 · 573
43. 10.1007/BF0065622910.1007/BF00656229 ↗
44. 10.1002/maco.20130742310.1002/maco.201307423 ↗
45. 10.1016/B978-044452787-5.00011-110.1016/B978-044452787-5.00011-1 ↗
46. 10.1007/BF0265718310.1007/BF02657183 ↗
47. 10.1007/BF0264201910.1007/BF02642019 ↗
48. 10.1149/1.212741710.1149/1.2127417 ↗