journal article·2019-12Open access

Long‐term exposure of austenitic steels and nickel‐based alloys in lignite‐biomass cofiring

Xabier Montero, Mario Rudolphi, Mathias C. Galetz

Materials and Corrosion· Volume 70· Issue 12

Abstract

Abstract The aim of this study was to assess the long‐term impact that the addition of biomass provokes on superheater materials exposed to fireside corrosion environments. Alloys covering a broad range of commercially available materials were investigated. Their corrosion kinetics under different corrosive deposits and atmospheres was evaluated, and their corrosion products analyzed to deepen understanding of the underlying corrosion mechanisms. Therefore, three nickel‐based alloys and three austenitic steels containing 20–24 wt.% Cr were tested at 650°C for 7,000 hr. The long‐term exposure shows new mechanistic aspects of Type II hot corrosion that were revealed by accelerated material depletion. The formation of Ni–NiS eutectic and the formation of a Cr depleted zone close to the substrate corrosion product interface are indicative of the breakaway occurrence. Differences in the corrosion behavior are related to the balance of Ni, Mo, Co, and Cr and can serve as the material selection argument. The evaluation concluded with the finding that alloys presenting Mo and Ni might be preferentially used in fireside corrosion in the presence of biomass, whereas the use of austenitic steels suffer less corrosion if no biomass is present in the corrosive atmosphere.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

DECHEMA‐Forschungsinstitut Frankfurt am Main Germany

Funding

Bundesministerium für Wirtschaft und Energie

References (31)

Show source-provided references
1. 10.1016/j.fuel.2011.03.01010.1016/j.fuel.2011.03.010 ↗
2. A.Robinson L.Baxter H.Junker C.Shaddix M.Freeman R.James D.Dayton Proc BioEnergy 98 Madison WI October 4–8 1998.
3. 10.1007/s11085-011-9254-610.1007/s11085-011-9254-6 ↗
4. 10.1016/B978-044452787-5.00192-X10.1016/B978-044452787-5.00192-X ↗
5. 10.1080/09603409.2017.140469210.1080/09603409.2017.1404692 ↗
6. 10.1016/S0010-938X(01)00057-910.1016/S0010-938X(01)00057-9 ↗
7. 10.3184/096034007X26358710.3184/096034007X263587 ↗
8. Pettit F. S. · 1987 · 327
9. 10.1007/s11085-015-9559-y10.1007/s11085-015-9559-y ↗
10. 10.1179/02670830110150897210.1179/026708301101508972 ↗
11. 10.1016/j.jallcom.2018.05.26310.1016/j.jallcom.2018.05.263 ↗
12. 10.1016/j.msea.2013.04.08710.1016/j.msea.2013.04.087 ↗
13. 10.1016/j.msea.2017.10.07810.1016/j.msea.2017.10.078 ↗
14. Jelita Rydel J. · 2012
15. 10.1002/maco.20140790110.1002/maco.201407901 ↗
16. H.Okada M.Igarashi S.Yamamoto O.Miyahara A.Iseda N.Komai F.Masuyama inEighth Int. Conf. Creep Fatigue Elevated Temp 2007 San Antonio ASME pp. 1‐8.
17. ISO 17224: Corrosion of metals and alloys—Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt ash or other substances.2015.
18. ISO 21608: International Standard: Corrosion of metals and alloys—Test method for isothermal‐exposure oxidation testing under high‐temperature corrosion conditions for metallic materials.2012.
19. 10.1007/s11085-017-9746-010.1007/s11085-017-9746-0 ↗
20. 10.1016/0040-6090(84)90011-710.1016/0040-6090(84)90011-7 ↗
21. 10.1016/j.corsci.2018.06.00910.1016/j.corsci.2018.06.009 ↗
22. M.Schütze. M.Spiegel inProceedings der Jahrestagung der GfKORR. Frankfurt am Main 2004
23. 10.1002/(SICI)1521-4176(199907)50:7<373::AID-MACO373>3.0.CO;2-T10.1002/(SICI)1521-4176(199907)50:7<373::AID-MACO373>3.0.CO;2-T ↗
24. 10.1016/j.surfcoat.2015.10.07410.1016/j.surfcoat.2015.10.074 ↗
25. 10.1590/S1516-1439200400010001310.1590/S1516-14392004000100013 ↗
26. N.Otsuka inInternational Symposium on High‐temperature Oxidation and Corrosion 2018.
27. Grabke H. J. · Molten Salt Forum · 1998 · 5 · 405
28. 10.1002/(SICI)1521-4176(200001)51:1<34::AID-MACO34>3.0.CO;2-010.1002/(SICI)1521-4176(200001)51:1<34::AID-MACO34>3.0.CO;2-0 ↗
29. 10.1002/maco.20039012910.1002/maco.200390129 ↗
30. 10.1007/978-1-4615-9062-0_210.1007/978-1-4615-9062-0_2 ↗
31. Schmitt M. · 2013