journal article·2000-09

Influence of quench delay time on the corrosion behavior of aluminium alloy 2024

P. Campestrini, H. W. van Rooijen, E. P. M. van Westing, J. H. W. de Wit

Materials and Corrosion· Volume 51· Issue 9
Publisher page

Abstract

The corrosion behavior of aluminium alloys is largely influenced by the microstructure, particularly by the shape, size, and chemical composition of the intermetallic particles. Samples of AA2024-T3 have been heat treated, varying the value of the quench delay time to induce differences in the microstructure of the alloy. The samples were investigated both electrochemically, through corrosion potential monitoring and potentiodynamic measurements, and metallurgically, by means of optical microscopy, Scanning Electron Microscopy (SEM) and EDS analysis. The samples showed corrosion behavior clearly correlated with the type of microstructure. Two kinds of particles were identified in the samples treated with a low quench delay time: the round shaped Al-Cu-Mg precipitates, and the irregularly shaped Al-Cu-Mn-Si-Fe precipitates. When the quench delay time increases complicated shell-shaped particles, with differences in chemical composition between the core and the surface layer, are formed. The presence of these shell-shaped particles causes the corrosion mechanism of the 2024 aluminium alloy to change from general to localized.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.