The impact of corrosion on the mechanical behavior of steel undergoing plastic deformation
Source abstract
Abstract
Abstract In the present study the influence of the degree of plastic strain, due to various levels of plastic deformation during bending, on the mechanical properties of class BSt 500s tempcore steel was investigated, under various levels of salt spray corrosion. The resulted mass loss was of realistic levels and comparable to the one created by natural environmental causes. The results showed that even though an increase in plastic deformation resulted in an expected marginal increase in strength properties, it had a negative effect in ductility. The international community has not reached a consensus yet concerning the minimum required bending roll diameter, for stirrup production, which ranges between 4–10 times the diameter of the steel bar to be bent. It was also shown that this combination is crucial since strain fractures were recorded under the minimum required values set by the most current design guide‐lines and design oriented research. The results of this investigation are intended to offer an in depth understanding of the impact of the underestimated factor of corrosion on the mechanical properties of steel undergoing plastic deformation in corrosive environments and to show the need of re‐examination of existing codes.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Integrated Publishing Bending Reinforcing Bars http://www.tpub.com/steelworker2/77.htm.
2. Hellenic Code of Reinforced Concrete (EKOS) 2000.
3. Thessaly Steel Mills:www.halyvourgia.gr.
4. Eurocode 2 Design of concrete structures – Part 1‐1 NBN B15‐002 – ENV 1‐1: 1st edition December 1995.
5. Trezos et al. 13thHellenic Convention for Concrete Hellenic Technical Chamber Vol. II Rethymnon 1999 25–27.
6. ACI Manual of Concrete Practice Part 3 American Concrete Institute Detroit MI. 1994 318.
7. 10.1016/0950-0618(95)00077-110.1016/0950-0618(95)00077-1 ↗
8. A. A. Almusallam A. S. Al‐Gahtani A. R. Aziz F. H. Dakhil Rasheeduzzafar J. of Mat. in Civil Engineering August 1996.
9. Ch. Alk. Apostolopoulos M. P. Papadopoulos Sp. G. Pantelakis Construction and Building Materials 2005 In press.
10. 10.1680/macr.2005.57.7.40710.1680/macr.2005.57.7.407 ↗
11. S. Ignoul K. Brosens D. Van Gemert Triconsult N.V. Industriepark 1241/4 3545 Halen Belgium.
12. 10.1002/pse.5410.1002/pse.54 ↗
13. D. van Gemert ACI SP165 Ed. Swamy N. and Gaul R. 1996 25.
14. K. Brosens Doctoral Thesis K.U. Leuven May 2001.
15. G. Mpatis E. Rakanta L. Tsampras S. Mouyiakos G. Agnantiari 13th Hellenic Convention for Concrete Hellenic Technical Chamber Vol. II Rethymnon 1999 497.
16. G. Mpatis E. Rakanta P. Pantazopoulou 1stPan‐Hellenic Convention for Metallic Materials Thessaly University Volos Nov. 2001 268.
17. Hellenic Regulation for the Technology of Steel in Reinforced Concrete No. Δ 14/36010 – 29.2/24.3 Government Gazette 2000 381B.
18. 10.1002/maco.20040384110.1002/maco.200403841 ↗
19. Bond of corroded reinforcement Chapter 4 fib Bulletin 10 Bond of reinforcement in concrete ISSN 1562‐3610 Lausanne 2000 187.
20. ASTM B117‐94 Standard practice for operating salt (fog) testing apparatus West Conshohocken (PA) ASTM 1995 1.
21. DIN 488‐3 Reinforcing steel bars testing 1986.
22. ASTM G 1‐72 Standard practice for preparing cleaning and evaluating corrosion test specimens West Conshohocken (PA) 1993.