Lifetime extension of FeCrAlRE alloys in air: Potential roles of an enhanced Al-reservoir and surface pre-treatment
Source abstract
Abstract
Two novel approaches to extend the lifetimes of commercial FeCrAlRE alloys, such as Aluchrom YHf and Kanthal AF, for industrial usage have been developed by the CEC funded SMILER Project. These surface treatments either increased the available alloy Al reservoir by alloying, aluminising, or cladding/plating or preformed an α-Al2O3 protective scale by gas annealing. An extensive series of evaluation testing in laboratory air, extending to either 3000 h or chemical failure whichever was shorter, has been undertaken at temperatures between 800° and 1300°C on alloy coupons in the form of both 50 μm thick foil or 1 mm thick sheet. This has been augmented by selected further exposures of surface treated near real-life components (fibre mat heater burners and alloy supports for automobile emission control catalysts). The results of all these evaluation tests are fully detailed in this paper and have established both the viability of these procedures and their range of technological applicability.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. BRITE/EURAM IMPROVE programme, Project No. BE7972 (1994), Final Report 1997, CEC Brussels.
2. J. R. Nicholls, M. J. Bennett, Lifetime Modelling of High Temperature Corrosion Processes, (Editors M. Schütze, W. J. Quadakkers and J. R. Nicholls), European Federation of Corrosion Publication No. 34, Institute of Materials, London 2001, 3-14.
3. R. Newton, M. J. Bennett, J. P. Wilber, J. R. Nicholls, D. Naumenko, W. J. Quadakkers, H. Al-Badairy, G. Tatlock, G. Strehl, G. Borchardt, A. Kolb-Telieps, B. Jonsson, A. Westerlund, V. Guttmann, M. Maier, P. Beaven, idem 2001, 15-36.
4. Strehl · Mater. High Temp. · 2003 · 20 · 33910.1179/mht.2003.040 ↗
5. Bennett · Mater. High Temp. · 2003 · 20 · 347
6. H. Al-Badiary, G. J. Tatlock, H. E. Evans, G. Strehl,. G. Borchardt, R. Newton, M. J. Bennett, J. R. Nicholls, D. Naumenko, W. J. Quadakkers, Life-time Modelling of High Temperature Corrosion Processes (Editors M. Schütze, W. J. Quadakkers and J. R. Nicholls), European Federation of Corrosion Publication, No.34, Institute of Materials, London 2001, 50-65.
7. J. R. Nicholls, R. Newton, M. J. Bennett, H. E. Evans, H. Al-Badairy, G. J. Tatlock, D. Naumenko, W. J. Quadakkers, G. Strehl, G. Borchardt, idem 2001, 83-106.
8. Nicholls · Mater. High Temp. · 2003 · 20 · 42910.1179/mht.2003.050 ↗
9. Bennett · Solid State Phenomena · 1995 · 41 · 23510.4028/www.scientific.net/SSP.41.235 ↗
10. W. J. Quadakkers, D. Clements, M. J. Bennett, Microscopy of Oxidation-3 (Editors S. B. Newcomb and J. A. Little), The Institute of Materials, London 1997, 195-206.
11. H. Hattendorf, A. Kolb-Telieps, T. H. Strunskus, V. Zaporojchenko, F. Faupel, Lifetime Modelling of High Temperature Corrosion Processes (Editors M. Schütze, W. J. Quadakkers and J. R. Nicholls) European Federation of Corrosion Publications No.34, The Institute of Materials, London 2001, 135-147.
12. Taniguchi · Oxid. Met. · 1996 · 46 · 48110.1007/BF01048642 ↗
13. S. Taniguchi, T. Shibata, A. Andoh, Metal-Supported Automotive Catalytic Converters (Editor H. Bode), Werkstoff-Informationsgesellshaft, Frankfurt Germany 1997, 179-189.
14. J. E. Antill, J. B. Warburton, R. F. A. Carney, UKAEA, Harwell Laboratory Report, AERE-G1045 1978.
15. Metal Supported Automotive Catalytic Converters (Editor H.Bode) MACC 1997, (1997) and MACC 2001 (2002). Werkstoff-Informationsgesellshaft, Frankfurt, Germany.
16. R. Molins, A. Germidis, E. Andrieu, Microscopy of Oxidation-3 (Editors S. B. Newcomb and J. A. Little). Institute of Materials, London 1997, 3-11.
17. Moseley · Corros. Sci. · 1984 · 24 · 54710.1016/0010-938X(84)90036-2 ↗
18. Kadiri · Materials Science Forum · 2004 · 461-464 · 115710.4028/www.scientific.net/MSF.461-464.1157 ↗
19. Molins · Materials Science Forum · 2004 · 461-464 · 2910.4028/www.scientific.net/MSF.461-464.29 ↗
20. Bennett · Materials Science Forum · 2004 · 461-464 · 46310.4028/www.scientific.net/MSF.461-464.463 ↗
21. Naumenko · Mater. High Temp. · 2003 · 20 · 28710.1179/mht.2003.034 ↗
22. S. Taniguchi, A. Andoh, T. Shibata, Metal-Supported Automotive Catalytic Converters (Editor H. Bode) (2001) Werkstoff-Informationsgesellshaft. Frankfurt, Germany 2001, 83-92.
23. Kochubey · Materials and Corrosion · 2005 · 56 · 84810.1002/maco.200503915 ↗
24. Quadakkers · Werkstoffe und Korrosion · 1994 · 45 · 22210.1002/maco.19940450403 ↗
25. Quadakkers · Oxid. Met. · 2004 · 61 · 1710.1023/B:OXID.0000016274.78642.ae ↗
26. J. R. Nicholls, M. J. Bennett, N. J. Simms, W. J. Quadakkers, D. Naumenko, D. Goossens, H. Hattendorf, A. B. Smith, presented at the Microscopy of Oxidaton-6 Conference, Birmingham, April 2005.