A finite element model (FEM) for predicting the corrosion of multi‐material coupling system on aircrafts
Source abstract
Abstract
An approach based on a finite element model (FEM) is proposed to predict corrosion locations and regions of multi‐material coupling system on aircrafts in solution. In this work, the feasibility of the model is verified by the comparison of the galvanic current and mixed potential between test and simulation values in the multi‐electrode system. This model was applied to the analog connectors commonly used on aircraft. The surface potential distribution was measured by scanning micro‐reference electrode (SMRE) technique. It is found that the simulated potential is basically consistent with the measured potential trend, and the numerical difference is not significant. In terms of the corrosion morphology after 30 d soaking, it can be seen that the corrosion locations and regions are basically consistent with those obtained in the simulated potential distribution over −858 mV, while −858 mV is just the pitting potential of the aluminum alloy. The higher local current distribution in the corrosion concentration area is, the more serious corrosion is, which is in accordance with the experimental results.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Qingdao Branch of Naval Aeronautics University No. 2, Siliu Middle Road Qingdao 266041 P.R.China
References (30)
Show source-provided references
1. 10.1016/j.advengsoft.2011.02.01410.1016/j.advengsoft.2011.02.014 ↗
2. Citarella R. G. · Key Eng. Mater · 2006 · 324 · 451
3. 10.1016/j.corsci.2013.09.00310.1016/j.corsci.2013.09.003 ↗
4. Zhang Y. · Mater. Corros · 2017 · 68 · 10
5. Gouravaraju S. · Sdhm. Struct. Dura. Health. Monit · 2011 · 7 · 23
6. Wang C. · J. Theor. Appl. Inform. Technol · 2013 · 47 · 2
7. Derose J. · 2013
8. 10.1016/0010-938X(87)90024-210.1016/0010-938X(87)90024-2 ↗
9. 10.1016/0010-938X(88)90027-310.1016/0010-938X(88)90027-3 ↗
10. 10.1016/0010-938X(90)90013-U10.1016/0010-938X(90)90013-U ↗
11. 10.1016/S0010-938X(99)00097-910.1016/S0010-938X(99)00097-9 ↗
12. 10.1016/j.apnum.2005.04.02910.1016/j.apnum.2005.04.029 ↗
13. 10.1016/j.electacta.2009.03.04810.1016/j.electacta.2009.03.048 ↗
14. 10.1016/j.electacta.2012.10.05910.1016/j.electacta.2012.10.059 ↗
15. 10.1016/j.electacta.2011.04.01910.1016/j.electacta.2011.04.019 ↗
16. 10.1016/j.electacta.2011.12.07410.1016/j.electacta.2011.12.074 ↗
17. 10.1016/j.electacta.2016.01.17910.1016/j.electacta.2016.01.179 ↗
18. 10.1149/2.1221702jes10.1149/2.1221702jes ↗
19. 10.1016/j.corsci.2009.08.05110.1016/j.corsci.2009.08.051 ↗
20. P.Siva H.Theo P.Andres A.Robert B.John L.Hubertus presented atDoD Corr. Conf. La Quinta 31 July–5 August 2011 p.1.
21. 10.1016/j.corsci.2010.09.01010.1016/j.corsci.2010.09.010 ↗
22. 10.1016/j.corsci.2012.05.01310.1016/j.corsci.2012.05.013 ↗
23. 10.2478/kom-2013-000610.2478/kom-2013-0006 ↗
24. 10.1016/j.corsci.2013.03.03310.1016/j.corsci.2013.03.033 ↗
25. 10.1016/j.corsci.2014.07.03310.1016/j.corsci.2014.07.033 ↗
26. 10.1016/j.corsci.2015.06.02410.1016/j.corsci.2015.06.024 ↗
27. 10.1016/j.corsci.2013.03.03310.1016/j.corsci.2013.03.033 ↗
28. 10.1023/A:102554841109110.1023/A:1025548411091 ↗
29. Brad A. J. · 1980
30. 10.1016/j.electacta.2009.02.04610.1016/j.electacta.2009.02.046 ↗