journal article·2026-04-03Open access

Failure Investigation of Alloy 625 Sockolets After Prolonged Service in an Ammonia Cracker Unit

Kamlesh Chandra, N. Naveen Kumar, Niraj Kumar

Abstract

ABSTRACT Several sockolets of Alloy 625 operating at 540°C in contact with ammonia gas in a heavy water production plant showed cracking after 115,000 h of service‐life. A sockolet is a branch connection used to connect a smaller branch pipe to a larger main pipe. A failure investigation was done to identify the root cause of failure; it involved microstructural examination, fractography, hardness measurement, and X‐ray diffraction analysis. During service, the sockolet material developed a hard and brittle surface nitrided layer (40–65 µm), composed mainly of chromium nitride. The hardness of the nitrided layer was 1300 HV 0.2 as opposed to the hardness of 430 HV 0.2 for the base alloy. The failure of the sockolets was caused by intergranular cracking and fracture. The thick and highly brittle nitrided layer formed intergranular surface cracks, which propagated along grain boundaries into the base alloy substrate due to the presence of brittle Cr‐rich carbides.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Mechanical Failure Analysis and Simulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Science Division Bhabha Atomic Research Centre Mumbai Maharashtra India

Heavy Water Board Mumbai Maharashtra India

References (35)

Show source-provided references
1. Lai G. Y. · 2007 · 6710.31399/asm.tb.htcma.t52080067 ↗
3. 10.1002/maco.7011410.1002/maco.70114 ↗
4. C. B.Ramamurthy K.Paknikar andS.Bhushan “Experience With Inconel‐625 in Cracker Service in Heavy Water Plants (Paper No. 5.6) (pp. 5.6.1–5.6.9). National Symposium on Commissioning and Operating Experiences in Heavy Water Plants and Associated Chemical Industries ” (SCOPEX‐92) Bombay (India) 27‐28 Feb 1992.
5. Microstructural and Mechanical Properties of Service Exposed Alloy 625 Ammonia Cracker Tube Removed After 100 000 h10.1179/1743284711Y.0000000118 ↗
6. Rejuvenation of Service Exposed Ammonia Cracker Tubes of Cast Alloy 625 and Their Re‐Use10.1016/j.msea.2015.06.098 ↗
7. Precipitation of an Intermetallic Phase With Pt2Mo‐type Structure in Alloy 62510.1007/s11661-999-0194-6 ↗
8. Microstructure and Mechanical Properties of Inconel 625 Superalloy10.1016/S0022-3115(00)00723-6 ↗
9. Room Temperature Tensile Behavior of Service Exposed and Thermally Aged Service Exposed Alloy 62510.1016/S1359-6462(01)00965-4 ↗
10. Inconel Alloy 625 (2025) https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy-625.pdf.
11. 2015
12. Sedricks A. J. · 1996
13. A Comprehensive Study on Microstructural Development, Mechanical Properties and Corrosion Resistance of SS 321 Flange Service‐Aged at 540°C for 100,000 h10.1016/j.msea.2025.148759 ↗
14. Failure Analysis of FeCrAl Heating Coils Exposed to a High‐Temperature, High‐Pressure Ammonia Environment10.1016/j.engfailanal.2024.108286 ↗
15. Position‐Dependent Degradation and Damage Mechanisms of Inconel 600 in an Ammonia Gas Flow Environment at Elevated Temperatures10.1016/j.corsci.2024.112421 ↗
16. Internal Nitridation of Nickel‐Base Alloys. Part I. Behavior of Binary and Ternary Alloys of the Ni‐Cr‐Al‐Ti System10.1023/A:1018843612011 ↗
17. Deformation Phenomena Accompanying Internal Precipitation in Solids10.4028/www.scientific.net/DDF.216-217.73 ↗
18. Behaviour of Materials of Construction During Cracking of Ammonia at 600°C10.1179/000705978798276168 ↗
19. Failure Analysis of AISI 316L Ball Valves by Salt Bath Nitriding10.1016/j.engfailanal.2020.104455 ↗
20. Rorbo K. · 1980 · 147
21. CRCT/GTT‐Technologies FactSage 8.3 Montreal Canada/Aachen Germany; (2023).
22. Nitridation in NH3‐H2O‐Mixtures10.1002/maco.200303730 ↗
23. Thermochemical Corrosion of Furnace Materials in Atmospheres Containing Ammonia10.1002/maco.202414499 ↗
24. Nitriding Kinetics of Inconel 60010.1016/j.surfcoat.2013.03.040 ↗
25. Internal Nitridation of Nickel‐Chromium Alloys10.1007/BF00738289 ↗
26. Surface Hardening of Nickel Alloys by Means of Plasma Nitriding10.1007/s11661-004-0123-7 ↗
27. Improving the Surface Properties of Additive‐Manufactured Inconel 625 by Plasma Nitriding10.1016/j.surfcoat.2022.129130 ↗
28. Low Temperature Gaseous Nitriding of Ni Based Superalloys10.1179/026708409X12490360426043 ↗
29. The Influence Mechanism of Nitriding Time on NH3 Gas Nitriding of Laser Powder Bed Fusion 18Ni300 Steel10.1002/srin.202500608 ↗
30. Plasma Assisted Nitriding of Inconel 69010.1016/S0257-8972(01)01243-9 ↗
31. Plasma Nitriding of Inconel 62510.1016/0376-4583(79)90061-X ↗
32. Modifying the Properties of the Inconel 625 Nickel Alloy by Glow Discharge Assisted Nitriding10.1016/j.vacuum.2009.06.056 ↗
33. Effects on the Long‐Term Aging of Low Temperature Salt Bath Nitrided Aisi 321 Stainless Steel10.1088/1757-899X/394/3/032004 ↗
34. Damage Mechanism on Superalloy Surface of Coated Gas Turbine Vanes After Long‐Term Service10.1016/j.engfailanal.2025.109797 ↗
35. Failure of Alloy 625 Tube Stub Ends—Effect of Primary Nitrides10.1016/j.engfailanal.2013.03.018 ↗