Cold Gas Sprayed Titanium Coating for Corrosion Protection of Bipolar Plates in Proton Exchange Membrane Water Electrolysis
Source abstract
Abstract
ABSTRACT Climate‐neutral green hydrogen is produced by water electrolysis powered through renewable energy. In next generation electrolyzer, like the proton exchange membrane water electrolyzer (PEMWE), steel‐based bipolar plates (BPP) are supposed to replace titanium BPPs in order to minimize manufacturing costs. Yet, corrosion of steel is a possible threat to this next‐generation design. Consequently, corrosion protection coatings for the steel‐based BPPs are currently developed. In a novel approach, cold gas spraying (CGS) is used to apply a corrosion protection titanium coating on a BPP made of X2CrNiMo17‐12‐2 with a thickness of d = 0.5 mm. The coating is characterized through structural analysis methods and also in short‐term corrosion tests. The short‐term corrosion test shows high corrosion protection. The results demonstrate a new promising coating concept for corrosion protection for steel‐based BPPs in PEMWE. In this study, corrosion properties of cold gassprayed titanium coatings are evaluated for the first time regarding PEMWE requirements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hybrid Renewable Energy Systems · Hydrogen Storage and Materials · Catalysts for Methane Reforming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Surface Engineering Institute (IOT) RWTH Aachen University Aachen Germany
Funding
Bundesministerium für Bildung und Forschung
References (26)
Show source-provided references
1. Smolinka T. · 2011
2. A Comprehensive Review on PEM Water Electrolysis10.1016/j.ijhydene.2013.01.151 ↗
3. Comprehensive Review of Bipolar Plates for Proton Exchange Membrane Fuel Cells With a Focus on Materials, Processing Methods and Characteristics10.1016/j.ijhydene.2025.02.300 ↗
4. Coated Stainless Steels Evaluation for Bipolar Plates in PEM Water Electrolysis Conditions10.1016/j.ijhydene.2021.03.100 ↗
5. Protective Coatings on Stainless Steel Bipolar Plates for Proton Exchange Membrane (PEM) Electrolysers10.1016/j.jpowsour.2015.12.071 ↗
6. Low Cost Bipolar Plates for Large Scale PEM Electrolyzers10.1149/06403.1039ecst ↗
7. Preparation and Characterization of Tin‐Nickel Coatings for Corrosion Protection of PEM Electrolyzer Components10.1149/MA2023-02201226mtgabs ↗
8. Low‐Cost and Durable Bipolar Plates for Proton Exchange Membrane Electrolyzers10.1038/srep44035 ↗
9. Bobzin K. · 2024 · 1
10. Malkow T. · 2018
11. Assessing Potential Profiles in Water Electrolysers to Minimise Titanium Use10.1039/D2EE00876A ↗
12. Recrystallization of Cold Spray‐Fabricated CP Titanium Structures10.1007/s11666-008-9212-2 ↗
13. Electrochemical Behavior of Titanium‐Tantalum Alloys in Sulfuric Acid Solutions10.1002/maco.200303792 ↗
14. The Effect of Fluoride Ions on the Corrosion Behavior of Pure Titanium in 0.05M Sulfuric Acid10.1016/j.electacta.2014.05.055 ↗
15. Investigation of Passivation and Galvanic Corrosion of Ti–Nb Alloys and Pure Titanium10.1002/maco.201407784 ↗
16. Electrochemical Impedance Spectroscopy Study of the Passive Oxide Film on Titanium for Implant Application10.1016/0013-4686(95)00465-3 ↗
17. The Effect of Nitrogen Diffusion Hardening on the Surface Chemistry and Scratch Resistance of Ti‐6Al‐4V Alloy10.1016/S0142-9612(00)00049-1 ↗
18. The Effect of Potential on Surface Characteristic and Corrosion Resistance of Anodic Oxide Film Formed on Commercial Pure Titanium at the Potentiodynamic‐Aging Mode
19. Anodic Growth of Titanium Oxide: Electrochemical Behaviour and Morphological Evolution10.1016/j.electacta.2012.04.114 ↗
20. Growth Process of Atomically Flat Anodic Films on Titanium Under Potentiostatical Electrochemical Treatment in H2SO4 Solution10.1016/j.susc.2007.04.211 ↗
21. Growth and Crystallization of Titanium Oxide Films at Different Anodization Modes10.1149/2.070306jes ↗
22. Dynamic Testing of Cold Gas Sprayed Bipolar Plates–Porous Transport Layer Coating System in Proton Exchange Membrane Water Electrolysis10.1002/adem.202502848 ↗
23. Manufacturing and Properties Characterization of Ti Patterned Coatings for Water Electrolyzers by CSAM10.1016/j.apsadv.2024.100649 ↗
24. Design and Testing Criteria for Bipolar Plate Materials for PEM Fuel Cell Applications10.1557/PROC-393-151 ↗
25. Ex Situ Evaluation of Nanometer Range Gold Coating on Stainless Steel Substrate for Automotive Polymer Electrolyte Membrane Fuel Cell Bipolar Plate10.1016/j.jpowsour.2009.09.022 ↗
26. U.S. Department of Energy “DOE Technical Targets for Polymer Electrolyte Membrane Fuel Cell Components” 2025 https://www.energy.gov/eere/fuelcells/doe‐technical‐targets‐polymer‐electrolyte‐membrane‐fuel‐cell‐components.