Influences of Process Parameters on MRR Improvement in Simple and Powder-Mixed EDM of AA6061/10%SiC Composite
Source abstract
Abstract
In the present work, aluminum alloy 6061/10%SiC composite is machined using numerical controlled Z-axis (ZNC) electrical discharge machining (EDM) process. Improvement in material removal rate (MRR) is explored using tungsten powder suspended dielectric fluid in EDM process (powder-mixed electrical discharge machining (PMEDM)). Peak current, pulse on time, pulse off time, and gap voltage are studied as process parameters. Mathematical relation between process parameters and MRR is established on basis of response surface methodology. The results obtained are further compared with MRR achieved from machining using simple EDM. The existence of tungsten particles in kerosene resulted in 48.43% improvement in MRR. The influence of tungsten powder-mixed dielectric fluid on machined surface is analyzed using scanning electron microscope and energy dispersive spectroscopy (EDS). The results revealed improvement in surface finish and reduction in recast layer thickness with PMEDM. EDS analysis reported presence of tungsten and carbon in recast layer deposited on machined surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. 10.1007/BF0271714110.1007/BF02717141 ↗
2. Kevorkijan V.M. · Journal of Electronic Materials, Metallurgical and Materials Transactions (JOM) · 1999 · 51 · 54
3. 10.1016/S0924-0136(02)00127-910.1016/S0924-0136(02)00127-9 ↗
4. 10.1016/S0924-0136(98)00054-510.1016/S0924-0136(98)00054-5 ↗
5. Pandey, P.C.; Shan, H.S.Modern Machining Processes; Tata McGraw Hill: New Delhi, India, 2008; 840.
6. 10.1016/S0890-6955(03)00162-710.1016/S0890-6955(03)00162-7 ↗
7. 10.1016/S0924-0136(96)02730-610.1016/S0924-0136(96)02730-6 ↗
8. 10.1016/j.jmatprotec.2004.04.32110.1016/j.jmatprotec.2004.04.321 ↗
9. 10.1080/1042691050047148210.1080/10426910500471482 ↗
10. 10.1016/j.apm.2009.03.02110.1016/j.apm.2009.03.021 ↗
11. 10.1080/10426914.2013.76367810.1080/10426914.2013.763678 ↗
12. Singh S. · Journal of Minerals and Materials Characterization and Engineering · 2011 · 10 · 19910.4236/jmmce.2011.102014 ↗
13. 10.1007/s00170017014210.1007/s001700170142 ↗
14. 10.1016/S0924-0136(02)00570-810.1016/S0924-0136(02)00570-8 ↗
15. 10.1007/s00170-007-1307-210.1007/s00170-007-1307-2 ↗
16. 10.1080/10426914.2010.52741510.1080/10426914.2010.527415 ↗
17. 10.1007/s00170-012-4115-210.1007/s00170-012-4115-2 ↗
18. 10.1016/S0924-0136(97)00450-010.1016/S0924-0136(97)00450-0 ↗
19. 10.1080/10426914.2013.76395810.1080/10426914.2013.763958 ↗
20. 10.1080/10426914.2013.85221110.1080/10426914.2013.852211 ↗
21. Uno Y. · 2001
22. Montgomery D.C. · 2010