On effect of tool rotation on performance of rotary tool micro-ultrasonic machining
Source abstract
Abstract
The present research paper is based on a comparative study of stationary tool micro-ultrasonic machining (STMUSM) and rotary tool micro-ultrasonic machining (RTMUSM). Microchannels were developed on glass work material by using both processes. The effect of tool rotation on the performance of micro-USM was investigated. The performance of both processes was compared on the basis of material removal rate (MRR) and depth of channel (DOC) as response characteristics. The power rating, work feed rate, concentration of abrasive slurry, and abrasive mesh size were chosen as variable input process parameters in this investigation. The form accuracy of the fabricated microchannels was analyzed with the help of imaging technique. Also, a qualitative analysis of tool wear was carried out with the help of microscopic images. The experimental results revealed that the tool rotation significantly improved the performance of micro-USM. The RTMUSM resulted in 155% and 147% higher MRR and DOC as compared to STMUSM. The tool wear was also found to be lesser in RTMUSM as compared to STMUSM and as a result of that form accuracy of machined microchannels improved.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Machining and Optimization Techniques · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Industrial Engineering Department, Indian Institute of Technology Roorkee, Roorkee, India.
Funding
Science and Engineering Research Board (SERB), Department of Science and Technology (DST), Government of India
References (26)
Show source-provided references
1. 10.1080/0145763070185096810.1080/01457630701850968 ↗
2. 10.1080/1553317050052459510.1080/15533170500524595 ↗
3. 10.1080/10426914.2015.104835910.1080/10426914.2015.1048359 ↗
4. 10.1080/10426914.2015.110385710.1080/10426914.2015.1103857 ↗
5. 10.1080/10426914.2017.133931910.1080/10426914.2017.1339319 ↗
6. Pandey P. C. · 1980
7. 10.1007/978-1-349-16435-610.1007/978-1-349-16435-6 ↗
8. 10.1049/tpe.1975.024510.1049/tpe.1975.0245 ↗
9. 10.1080/10426914.2017.127930110.1080/10426914.2017.1279301 ↗
10. 10.1016/S0890-6955(97)00036-910.1016/S0890-6955(97)00036-9 ↗
11. Hu, X.; Mechanism, Characteristics and Modeling of Micro Ultrasonic Machining. PhD Thesis, University of Nebraska, 2007.
12. Shaw M. C. · Microtechnic · 1956 · 10 · 257
13. Cook N. H. · 1966
14. 10.1063/1.172269810.1063/1.1722698 ↗
15. Rozenberg L. D. · 1964
16. Jain V. · J. Mech. Eng. · 2011 · 11 · 24
17. 10.1016/S0007-8506(07)60398-910.1016/S0007-8506(07)60398-9 ↗
18. 10.2526/ijem.2.3110.2526/ijem.2.31 ↗
19. Boy J. J. · Microultrasonic Machining Using Multitools · 2010 · 47 · 37
20. Cheema, M. S.; An Ultrasonic Micromachining Approach to Fabricate Microchannels on Glass. PhD Thesis, Indian Institute of Technology, Roorkee, 2015.
21. Kumar S. · Int. J. Adv. Manuf. Technol. · 2017 · 1 · 213
22. 10.1016/j.jmapro.2018.04.00810.1016/j.jmapro.2018.04.008 ↗
23. Benedict G. F. · 1987
24. 10.1080/10426914.2016.117618010.1080/10426914.2016.1176180 ↗
25. 10.1080/10426914.2016.119801810.1080/10426914.2016.1198018 ↗
26. 10.1080/0305215060073396210.1080/03052150600733962 ↗