Friction stir processing of aluminum machining waste: carbon nanostructure reinforcements for enhanced composite performance - a comprehensive review
Source abstract
Abstract
Climate change represents a worldwide environmental issue, prompting extensive research and innovation aimed at advancing sustainability within the aluminum manufacturing sector. A significant source of aluminum waste, particularly in the aerospace sector, comes from machining chips, which are crucial for recycling efforts that support a circular economy. The increasing demand for advanced, reliable materials has highlighted the potential of composites, with carbon nanostructures like carbon nanotubes and/or graphene emerging as exceptional reinforcement materials in Metal Matrix Composites (MMCs). Solid-state processing, particularly Friction Stir Processing gained recognition as a sustainable technique for converting aluminum machining waste into high performance carbon-reinforced composites. This review addresses the sustainability challenges of aluminum recycling within the circular economy framework, emphasizing the consolidation mechanisms of machining chips and factors influencing their density and microstructure. Additionally, it explores the significance of CNTs/graphene in enhancing the mechanical, thermal, electrical and tribological properties of aluminum composites, considering key factors such as reinforcement content, agglomeration, and interfacial reactions. The review summarizes and critically analyses the major research findings and discusses future prospects for synthesizing graphene/CNT-reinforced aluminum composites via FSP, underscoring their potential to meet contemporary demands for sustainable, high-performance materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Mechanical Engineering, KLS Gogte Institute of Technology, Belagavi, Karnataka, India
Visvesvaraya Technological University, Belagavi, Karnataka, India
References (100+)
Show source-provided references
1. Handbook, M. Vol. 2-Properties and Selection: Nonferrous Alloys and Special-Purpose Mater. ASM Inter. 1990, 1119–1124. https://t.ly/gCBhh.
2. 10.1080/10408436.2019.163279210.1080/10408436.2019.1632792 ↗
3. World Economic Forum: The Aluminium Industry: Partnership That Brings Change. Jan 17 2024. https://www.weforum.org/agenda/2024/01/aluminium-industry-partnerships-that-bring-change-for-the/#:~:text=Driven%20largely%20by%20increased%20use to%20make%20this%20growth%20sustainable.
4. 10.1021/es304256s10.1021/es304256s ↗
5. 10.1016/j.pmatsci.2022.10094810.1016/j.pmatsci.2022.100948 ↗
6. 10.31399/asm.hb.v02a.a000648410.31399/asm.hb.v02a.a0006484 ↗
7. 10.1016/j.pmatsci.2022.10094710.1016/j.pmatsci.2022.100947 ↗
8. 10.4028/www.scientific.net/AMR.83-86.57110.4028/www.scientific.net/AMR.83-86.571 ↗
9. Aluminium for Climate: Exploring Pathways to Decarbonize the Aluminium Industry.; World Economic Forum. http://tinyurl.com/4xfs3t3a.
10. What Does Recycled Aluminum Have to Do with Lowering the world’s Total Carbon Emissions? J. Duncan Pitchford President Hydro Aluminum Metals USA. Apr 9 2024. https://www.linkedin.com/pulse/what-does-recycled-aluminum-have-do-lowering-worlds-total-pitchford-my18c/.
11. Material Recycling Association of India (MRAI). https://mrai.org.in/theindustry/non-ferrousmetals.html.
12. 10.1080/08827508.2010.53072110.1080/08827508.2010.530721 ↗
13. 10.3390/ma1603089510.3390/ma16030895 ↗
14. 10.1080/0894192890938067510.1080/08941928909380675 ↗
15. Oxford University Museum of Natural History Parks Road Oxford OX1 3PW. https://oumnh.ox.ac.uk/waste-from-aluminium-production.
16. 10.3390/app1009299310.3390/app10092993 ↗
17. GRID-Arendal Teaterplassen 3 N-4836 Arendal Norway. https://www.grida.no/resources/5848.
18. Central Pollution Control Board (Ministry of Environment. Forest and Climate Change) Parivesh Bhawan.; East Arjun Nagar: Delhi, India-; p. 110032. https://cpcb.nic.in/uploads/hwmd/Guidelines_HW_6.pdf.
19. 10.1007/s10666-016-9510-x10.1007/s10666-016-9510-x ↗
20. Sakon, K.; Haraki, Y.; Enokida, N.; Yoshida, H.; Yamagishi, Y.; Sako, T. Environmentally Friendly Anodized Aluminum Formation Using High-Pressure Carbon Dioxide and Water. In Asian Pacific Confederation of Chemical Engineering Congress Program and Abstracts Asian Pacific Confederation of Chemical Engineers Congress Program and Abstracts; The Society of Chemical Engineers: Japan, 2004; pp. 580–580. https://www.jstage.jst.go.jp/article/apcche/2004/0/2004_0_580/_article/-char/ja/.
21. 10.1016/j.rineng.2024.10256610.1016/j.rineng.2024.102566 ↗
22. 10.1061/(ASCE)HZ.1944-8376.000004510.1061/(ASCE)HZ.1944-8376.0000045 ↗
23. 10.1016/j.resconrec.2011.05.00910.1016/j.resconrec.2011.05.009 ↗
24. U.S. Environmental Protection Agency. Material-Specific Data: Aluminum. https://www.epa.gov/facts-and-figures-about-materials-waste-and-recycling/aluminum-material-specific-data.
25. Aluminium Stewardship Initiative (ASI). https://aluminium-stewardship.org/.
26. ISO 9001: 2015 - Quality Management Systems. https://www.iso.org/standard/62085.html.
27. ISO 14001: 2015 - Environmental Management Systems. https://www.iso.org/standard/60857.html.
28. ISO 45001: 2018 - Occupational Health and Safety Management Systems. https://www.iso.org/standard/63787.html.
29. Muchová, L.; Eder, P. End-Of-Waste Criteria for Aluminium and Aluminium Alloy Scrap: Technical Proposals. In Institute for Prospective Technological Studies.; Publications Office of the European Union, Luxembourg, 66, 2010. https://publications.jrc.ec.europa.eu/repository/bitstream/JRC58527/jrc58527.pdf.
30. ILIĆ, M.; Budak, I.; Crnobrnja, B.; HODOLIČ, J. Analysis of self-declared environmental labels Analiza samodeklariranih ekoloških oznak. RMZ–Mater. Geoenvironment. 2009, 56(1), 74–87.
31. European Commission Energy Climate Change Environment End-Of-Life Vehicles. https://environment.ec.europa.eu/topics/waste-and-recycling/end-life-vehicles_en.
32. International Aluminium Institute (IAI) Aluminium Recyclability and Recycling Towards Sustainable Cites. https://international-aluminium.org/wp-content/uploads/2017/12/Aluminium-Recyclability-Recycling-TSC-2.pdf.
33. Jawaharlal Nehru Aluminium Research Development and Design Centre Opposite Wadi Police Station Amravati Road Wadi Nagpur 440 023 India. https://jnarddc.gov.in/RecyclingPromotion/Files/NFMScrapRecyclingFramework-2020.pdf.
34. Corpseed Compliance and Advisory Platform Second Floor A-Block Sector 63 UP India. https://www.corpseed.com/news/india-s-new-epr-regulation-for-non-ferrous-metals.
35. Bureau of International Recycling 24 Avenue Franklin Roosevelt 1050 Brussels Belgium. https://www.bir.org/the-industry/non-ferrous-metals.
36. 10.4028/www.scientific.net/amr.83-86.57110.4028/www.scientific.net/amr.83-86.571 ↗
37. Lerma, J. A. M. Recycling of Aerospace Aluminum Components into New Valuable Products.; McGill University (Canada), 2016. https://www.proquest.com/openview/76b9f9ff1e217893243a87a7098910de/1?pq-origsite=gscholar&cbl=18750&diss=y.
38. Das, S. K.; Kaufman, J. G. Recycling Aluminum Aerospace Alloys. Adv. Mater. Proc. 2008, 166(3), 34.
39. 10.1007/s11837-010-0026-610.1007/s11837-010-0026-6 ↗
40. ASTM E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials. https://www.astm.org/e0008_e0008m-22.html.
41. ISO 6892-1: Metallic Materials — Tensile Testing. https://www.iso.org/obp/ui/#iso:std:iso:6892:-1:ed-3:v1:en.
42. ASTM E466 - Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials. https://www.astm.org/e0466-21.html.
43. ASTM E399 - Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials. https://www.astm.org/e0399-22.html.
44. ASTM G44 - Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 %.; Sodium Chloride Solution. https://www.astm.org/g0044-21.html.
45. ASTM G110 - Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + hydrogen Peroxide Solution. https://www.astm.org/g0110-92r15.html.
46. ASTM E384 - Standard Test Method for Micro Indentation Hardness of Materials. https://www.astm.org/e0384-22.html.
47. ASTM E18 - Standard Test Methods for Rockwell Hardness of Metallic Materials. https://www.astm.org/e0018-22.html.
48. ASTM E2375 - Standard Practice for Ultrasonic Testing of Wrought Products. https://www.astm.org/e2375-22.html.
49. ASTM E1742/E1742M - Standard Practice for Radiographic Examination. https://www.astm.org/e1742_e1742m-18.html.
50. ASTM E1251 - Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry. https://www.astm.org/e1251-17a.html.
51. ASTM E3061-17 - Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method).
52. 10.1201/978100346749610.1201/9781003467496 ↗
53. Zeitlin, J.; Herrigel, G., Eds. Americanization and Its Limits: Reworking US Technology and Management in Post-War Europe and Japan.; Oxford University Press: USA, 2000. https://cadmus.eui.eu/bitstream/handle/1814/1638/1999_EUI%20WP_RSCAS_033.pdf?isAllowed=y&sequence=1.
54. 10.12987/yale/9780300120189.001.000110.12987/yale/9780300120189.001.0001 ↗
55. 10.3390/met1105071810.3390/met11050718 ↗
56. 10.1063/5.016300210.1063/5.0163002 ↗
57. 10.2514/5.9781624104893.0011.020810.2514/5.9781624104893.0011.0208 ↗
58. 10.1016/j.jclepro.2015.12.00910.1016/j.jclepro.2015.12.009 ↗
59. Additive Manufacturing – Helping to Reduce Waste in Aircraft Production. https://www.open.ac.uk/blogs/design/additive-manufacturing-helping-to-reduce-waste-in-aircraft-production/.
60. Kobryn P. A.; Ontko N. R.; Perkins L. P.; Tiley J. S. Additive Manufacturing of Aerospace Alloys for Aircraft Structures. Air Force Research Lab Wright-Patterson AFB OH Materials and Manufacturing Directorate. 2006. http://tinyurl.com/3ax79p5w.
61. 10.1108/1741038101106399610.1108/17410381011063996 ↗
62. Allen, J. An Investigation into the Comparative Costs of Additive Manufacture Vs. Machine from Solid for Aero Engine Parts. Cost Effective Manufacture Via Net-Shape Process. 2006, 17, 1–17. http://tinyurl.com/mryuv3sj.
63. Williams, S.; Martina, F. Wire+ Arc Additive Manufacturing Vs. Traditional Machining from Solid: A Cost Comparison. Mater Sci. Technol (UK). 2015, 32(1), 27. https://t.ly/Tqjxw.
64. 10.4271/2005-01-330610.4271/2005-01-3306 ↗
65. 10.31399/asm.amp.2013-03.p01910.31399/asm.amp.2013-03.p019 ↗
66. Prescient Technologies Prescient Blog. Mar 27 2023. https://www.pre-scient.com/blogs/additive-manufacturing/the-advantages-and-limitations-of-additive-manufacturing-a-comprehensive-overview/.
67. 10.1080/10426914.2024.236262110.1080/10426914.2024.2362621 ↗
68. 10.3390/app13181025510.3390/app131810255 ↗
69. 10.1080/10426914.2024.232344110.1080/10426914.2024.2323441 ↗
70. 10.3390/met1304071610.3390/met13040716 ↗
71. 10.1002/adma.20100106810.1002/adma.201001068 ↗
72. 10.3390/ma1613463510.3390/ma16134635 ↗
73. 10.1080/1042691070145179610.1080/10426910701451796 ↗
74. 10.1016/j.resconrec.2017.06.00410.1016/j.resconrec.2017.06.004 ↗
75. 10.3390/ma708566410.3390/ma7085664 ↗
76. 10.1080/10426914.2011.57786710.1080/10426914.2011.577867 ↗
77. 10.1177/168781401666192110.1177/1687814016661921 ↗
78. 10.1201/978142000624710.1201/9781420006247 ↗
79. 10.1016/j.jmrt.2023.10.02210.1016/j.jmrt.2023.10.022 ↗
80. 10.3390/met1002029610.3390/met10020296 ↗
81. Selmy, A.; Abd El Aal, M.; El-Gohry, A.; Taha, M. Solid-State Recycling of Aluminum Alloy (AA-6061) Chips via Hot Extrusion Followed by Equal Channel Angular Pressing (ECAP). The Egypt. Int. J. Eng. Sci. Technol. 2016, 21, 33–42. https://t.ly/dcGXg.
82. 10.1007/s11740-016-0682-710.1007/s11740-016-0682-7 ↗
83. 10.13140/RG.2.1.4692.760310.13140/RG.2.1.4692.7603 ↗
84. 10.1007/s11665-016-2194-110.1007/s11665-016-2194-1 ↗
85. 10.1007/s00170-016-8569-510.1007/s00170-016-8569-5 ↗
86. 10.1063/5.021245210.1063/5.0212452 ↗
87. 10.1007/s00170-019-04629-710.1007/s00170-019-04629-7 ↗
88. Plata, M.; Piwnik, J. Theoretical and Experimental Analysis of Seam Weld Formation in Hot Extrusion of Aluminum Alloys. Presented at the Proceedings of Seventh International Aluminum Extrusion Technology Seminar ET, 2000; Vol. I. pp 205–211. https://scholar.google.com/scholar?cluster=6209177906827388447&hl=en&oi=scholarr.
89. Donati, L.; Tomesani, L. Evaluation of a New FEM Criterion for Seam Welds Quality Prediction in Aluminum Extruded Profiles. Proceedings 8th Int. Conference-Aluminum Extrusion Technology Seminar, Aluminum Extruders Council, 2004; Vol. 2, pp 221–235. https://cris.unibo.it/handle/11585/10179.
90. 10.1016/j.jmatprotec.2023.11808010.1016/j.jmatprotec.2023.118080 ↗
91. 10.1016/j.jallcom.2009.07.14610.1016/j.jallcom.2009.07.146 ↗
92. 10.1007/s12540-019-00428-710.1007/s12540-019-00428-7 ↗
93. 10.1007/s11663-014-0067-210.1007/s11663-014-0067-2 ↗
94. Yusuf, N. K.; Medi, A. S.; Lajis, M. A.; Chan, B. L.; Shamsudin, S. 2021. Mechanical Properties of Direct Recycling Metal Matrix Composite (MMC-AlR) AA7075 Aircraft Aluminium Alloy. Inter. J. Integrated Eng. 13(7), 89–94. https://penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/7435/4493.
95. 10.3390/met1210155510.3390/met12101555 ↗
96. 10.1115/1.403128110.1115/1.4031281 ↗
97. Hosseini, A.; Azarsa, E.; Davoodi, B.; Ardahani, Y. Effect of Process Parameters on the Physical Properties of Wires Produced by Friction Extrusion Method. Int. J. Adv. Eng. Technol. 2012, 3(1), 592. https://t.ly/rarTn.
98. 10.1016/j.powtec.2014.08.01610.1016/j.powtec.2014.08.016 ↗
99. 10.1134/S207511331803013910.1134/S2075113318030139 ↗
100. 10.1016/j.proeng.2017.10.79810.1016/j.proeng.2017.10.798 ↗