Fiber laser cutting of CFRP composites and process optimization through response surface methodology
Source abstract
Abstract
In this experimental study, the effects of major laser process control parameters, such as the laser power, beam scanning speed and assisting gas flow rate, on cut surface integrity defined by the kerf width, taper percentage, and the extent of heat affected zone (HAZ) were investigated. Response surface methodology (RSM) along with central composite design (CCD) of the experiment was used to optimize the process parameters to get better-cut surface quality. The optimum values of process parameters corresponding to cut surface with minimum defects are laser power 260 W, cutting speed 4500 mm per min, and assistance gas flow rate 14.23 l/min and the corresponding kerf width, taper percentage, and the width of HAZ are found to be 163.7 µm, 5.75%, and 573.28 µm. The confirmation experiments have been conducted that provide favorable results with an error of 2.70%, 1.87%, and 0.36%, for kerf width, taper percentage, and width of HAZ, respectively.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Laser Material Processing Techniques · Advanced machining processes and optimization · Advanced Machining and Optimization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Defence Research Development Laboratory, Hyderabad, Telangana, India
Indian Institute of Technology (ISM), Dhanbad, Jharkhand, India
Funding
DRDL, Hyderabad
References (42)
Show source-provided references
1. 10.1080/10426914.2015.101909710.1080/10426914.2015.1019097 ↗
2. 10.1080/1042691070138543210.1080/10426910701385432 ↗
3. 10.1080/10426914.2013.87226910.1080/10426914.2013.872269 ↗
4. 10.1080/1042691940893490510.1080/10426919408934905 ↗
5. 10.1080/10426914.2011.57787310.1080/10426914.2011.577873 ↗
6. 10.1080/10426914.2015.110386410.1080/10426914.2015.1103864 ↗
7. 10.1016/j.compstruct.2015.05.03510.1016/j.compstruct.2015.05.035 ↗
8. 10.1016/j.procir.2016.03.09110.1016/j.procir.2016.03.091 ↗
9. 10.1016/j.compstruct.2016.01.00810.1016/j.compstruct.2016.01.008 ↗
10. 10.1080/10426914.2014.94187010.1080/10426914.2014.941870 ↗
11. 10.1081/MST-20004111610.1081/MST-200041116 ↗
12. 10.1080/10426914.2011.57786510.1080/10426914.2011.577865 ↗
13. 10.1080/1042691080238502610.1080/10426910802385026 ↗
14. 10.1080/1042691090357583010.1080/10426910903575830 ↗
15. 10.1016/j.phpro.2012.10.02610.1016/j.phpro.2012.10.026 ↗
16. 10.1016/j.ijmachtools.2009.08.00210.1016/j.ijmachtools.2009.08.002 ↗
17. 10.1080/10426914.2012.67791710.1080/10426914.2012.677917 ↗
18. 10.1016/j.compositesa.2008.04.00110.1016/j.compositesa.2008.04.001 ↗
19. 10.1016/0956-7143(92)90120-J10.1016/0956-7143(92)90120-J ↗
20. 10.1016/S0263-8223(02)00096-X10.1016/S0263-8223(02)00096-X ↗
21. 10.1002/(SICI)1097-4628(19961114)62:7<1029::AID-APP8>3.0.CO;2-M10.1002/(SICI)1097-4628(19961114)62:7<1029::AID-APP8>3.0.CO;2-M ↗
22. 10.5006/1.358303110.5006/1.3583031 ↗
23. 10.1080/1042691930893486410.1080/10426919308934864 ↗
24. 10.4028/www.scientific.net/KEM.611-612.79410.4028/www.scientific.net/KEM.611-612.794 ↗
25. Tagliaferri V. · Handbook of Ceramics and Composites · 1990 · 1 · 451
26. 10.1080/1042691900895327910.1080/10426919008953279 ↗
27. 10.1016/0010-4361(85)90284-810.1016/0010-4361(85)90284-8 ↗
28. 10.1016/S0007-8506(07)61030-010.1016/S0007-8506(07)61030-0 ↗
29. 10.1016/j.optlaseng.2013.07.02710.1016/j.optlaseng.2013.07.027 ↗
30. 10.1080/10426914.2015.103790110.1080/10426914.2015.1037901 ↗
31. 10.1016/j.compositesa.2010.05.01710.1016/j.compositesa.2010.05.017 ↗
32. 10.1016/j.compositesa.2013.08.00410.1016/j.compositesa.2013.08.004 ↗
33. Pan, C.T.; Hocheng, H. Laser machining and its associated effects. In Advanced Analysis of Nontraditional Machining, Hong Hocheng and Hung-Yin Tsai, Eds.; Springer: New York, 2013, 1–64.10.1007/978-1-4614-4054-3_1 ↗
34. 10.1016/j.compositesa.2014.08.03310.1016/j.compositesa.2014.08.033 ↗
35. 10.1016/j.ijmachtools.2008.04.00710.1016/j.ijmachtools.2008.04.007 ↗
36. 10.1016/j.ijmachtools.2014.05.00810.1016/j.ijmachtools.2014.05.008 ↗
37. Montgomery Douglas C. · 2001
38. 10.1007/s00170-008-1412-x10.1007/s00170-008-1412-x ↗
39. 10.1016/j.jmatprotec.2004.02.00310.1016/j.jmatprotec.2004.02.003 ↗
40. 10.1007/s00170-009-2431-y10.1007/s00170-009-2431-y ↗
41. 10.1016/j.compositesa.2012.02.01210.1016/j.compositesa.2012.02.012 ↗
42. 10.1016/S0890-6955(01)00090-610.1016/S0890-6955(01)00090-6 ↗