journal article·2010-12-03

Design and Optimization of Friction Stir Welding Tool

Mouloud Aissani, Saliha Gachi, Fouad Boubenider, Younes Benkedda

Publisher page

Abstract

In Friction stir welding, the tool geometry plays a fundamental role to obtain suited microstructures in the weld and the heat affected zone. In this work, for obtaining an excellent weld appearance without void, cracking, or distortion, an attempt was made to select proper FSW tool for aluminium alloy. So, we have included in the tool a safety system aimed at avoiding premature damage, and allowing the measure of applied pressure. The improved tool was tested on AA2024-T4 and AA7075-T6 aluminum alloys sheets. The weld quality has been evaluated by means of a microstructure analysis and micro-hardness measurements. The capacity to increase the welding speed, the changes of the crystalline plans orientation in the mixed part of thermo-mechanically affected zone and grains sizes observed in micrographics underlines the effect of the pin geometry and its displacement. The micro-hardness curve shows good mechanical properties. Finally, obtained results show welds of very good qualities. This study opens new interesting perspectives.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Lee , J.A. ; Carter , R.W. ; Ding , J. Friction Stir Welding for Aluminium Metal Matrix Composites (MMC's). MSFC Center Director's Discretionary Fund Final Report, Project No. 89-09, NASA/TM, MSFC – Alabama 35812. December 1999, 1–20.
2. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
3. Thomas , W.M. Friction Stir Welding of Ferrous Materials: A Feasibility Study , 1st International Symposium on Friction Stirs Welding, Rockwell Science Centre , Thousand Oaks , CA , USA , June 1999 .
4. 10.1080/1058975080249551310.1080/10589750802495513 ↗
5. Thomas , W.M. ; Dolby , R.E. Friction Stir Welding Developments , 6th International Conference on Trends in Welding Research , Pin Mountain – Georgia 2002 .
6. Fujii H. · Materials Science and Engineering · 2006 · 419 · 2510.1016/j.msea.2005.11.045 ↗
7. 10.1016/j.scriptamat.2007.09.06110.1016/j.scriptamat.2007.09.061 ↗
8. Rowe , D. ; Thomas , W.M. Advances in Tooling Materials for Friction Stir Welding, (Cedar Metals Ltd, TWI Cambridge) ; Materials Congress – Disruptive Technologies for Light Metals , London UK , April 2006 .
9. Thomas , W.M. ; Nicholas , E.D. ; Smith , S.D. Friction Stir Welding – Tool Developments , Aluminum 2001—Proceedings of the TMS 2001 Aluminum Automotive and Joining Sessions, TMS , New Orleans , Louisiana , USA , 2001 ; 213 pp.
10. 10.1002/adem.20030035510.1002/adem.200300355 ↗
11. Thomas , W.M. ; Dolby , R.E. ; In David , S.A. ; DebRoy , T. ; Lippold , J.C. ; Smartt , H.B. ; Vitek , J.M. (Eds.).Proceedings of the Sixth International Conference on Trends in Welding Research; ASM International : Pine Mountain , GA , 2003 ; 203 – 211 .
12. Thomas , W.M. ; Norris , I.M. ; Staines , D.G. ; Watts , E.R. Friction Stir Welding – Process Developments and Variant Techniques ; SME Summit 2005 , Oconomowoc Milwaukee USA , Aug 2005 .
13. Thomas , W.M. ; Staines , D.G. ; Watts , E.R. ; Norris , I.M. The Simultaneous Use of Two or More Friction Stir Welding Tools ; Internet publication by TWI Ltd, CBI 6AL , U.K , January 2005 .
14. Buffa G. · Materials Science and Engineering · 2006 · 419 · 38110.1016/j.msea.2005.09.041 ↗
15. 10.1016/j.compstruc.2007.04.00710.1016/j.compstruc.2007.04.007 ↗
16. 10.1179/174329306X10769210.1179/174329306X107692 ↗
17. 10.1016/j.jmatprotec.2005.12.01210.1016/j.jmatprotec.2005.12.012 ↗
18. Aissani , M. ; Gachi , S. ; Bekache , I. Outil de soudage par Friction Malaxage (FSW). Algerian National Institute of the patent rights (INAPI) 2007, Nr. 070759.
19. Payton L.N. Metal cutting theory and friction stir welding tool design. NASA faculty fellowship program, Auburn University 2002, XXXIV-1 to XXXIV-5.
20. 10.1016/j.engfracmech.2007.01.02610.1016/j.engfracmech.2007.01.026 ↗
21. 10.1023/B:JMSC.0000016171.50107.e410.1023/B:JMSC.0000016171.50107.e4 ↗
22. 10.1016/j.matdes.2008.09.02110.1016/j.matdes.2008.09.021 ↗
23. 10.1016/j.matdes.2009.03.01810.1016/j.matdes.2009.03.018 ↗