Fuzzy Modeling and Analysis of Machining Parameters in Machining Titanium Alloy
Source abstract
Abstract
Abstract Titanium alloys are utilized in many engineering fields such as chemical, industrial, marine, and aerospace due to their unique properties. Machining of these materials causes severe problems. At high temperatures, they become chemically active and tend to react with tool materials. In the present study, fuzzy logic (a tool in artificial intelligence) is used for the prediction of cutting parameters in turning titanium alloy (Ti-6Al-4V). The parameters considered in this study are cutting speed, feed, and the depth of cut. Fuzzy rule-based modeling is employed for prediction of tool flank wear, surface roughness, and specific cutting pressure in machining of titanium alloy. These models can be effectively used to predict the tool flank wear, surface roughness, and specific cutting pressure in machining of titanium alloys. Analysis of the influences of the individual important machining parameters on the responses have been carried out and presented in this study. Keywords: Chip formationFlank wearFuzzy logicMachiningModelingOrthogonal arrayPolycrystalline diamond (PCD) insertSEM studiesSpecific cutting pressureSurface profilesSurface roughnessTitanium alloyTi-6Al-4V alloyTurning ACKNOWLEDGMENTS The authors would like to thank the Technical Education Quality Improvement Programme (TEQIP) of the Government of India for the funding of the Kistler piezoelectric 3-component dynamometer (Type 9257B) under the scheme of "Modernization of laboratories and workshops" to carry out the research work. Notes LT = Lowest; LR = Lower; L = Low; M = Medium; H = High; HR = Higher; HT = Highest; EH = Extremely High; EL = Extremely Low; VL = Very Low; VH = Very High
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. 10.1016/S0007-8506(07)63362-910.1016/S0007-8506(07)63362-9 ↗
2. 10.1016/S0007-8506(07)63272-710.1016/S0007-8506(07)63272-7 ↗
3. Field , M.Surface Integrity—A new requirement for improving reliability of aerospace hardware. 18th Annual National SAMPE Symposium,1973.
4. 10.1016/0043-1648(81)90242-810.1016/0043-1648(81)90242-8 ↗
5. 10.1016/0043-1648(94)90266-610.1016/0043-1648(94)90266-6 ↗
6. 10.1016/0921-5093(94)09595-N10.1016/0921-5093(94)09595-N ↗
7. 10.1016/j.jmatprotec.2007.04.09510.1016/j.jmatprotec.2007.04.095 ↗
8. 10.1016/S0924-0136(01)00926-810.1016/S0924-0136(01)00926-8 ↗
9. 10.1243/095440504189708610.1243/0954405041897086 ↗
10. 10.1243/09544054JEM79810.1243/09544054JEM798 ↗
11. Ahmet Hascalik. · International Journal of Advanced Manufacturing Technology · 2007
12. 10.1016/j.cryogenics.2006.08.01110.1016/j.cryogenics.2006.08.011 ↗
13. 10.1016/S0924-0136(99)00464-110.1016/S0924-0136(99)00464-1 ↗
14. Konar A. · 2000
15. 10.1016/S0019-9958(65)90241-X10.1016/S0019-9958(65)90241-X ↗
16. 10.1016/S0924-0136(02)00847-610.1016/S0924-0136(02)00847-6 ↗
17. 10.1016/0890-6955(93)90036-T10.1016/0890-6955(93)90036-T ↗
18. 10.1016/0890-6955(94)E0033-F10.1016/0890-6955(94)E0033-F ↗
19. Palanikumar K. · Metals and Materials · 2006 · 12 · 48310.1007/BF03027748 ↗
20. Montgomery D.C. · 1991
21. Passino K.M. · 1998
22. Stephenson David A. · 1997
23. 10.1016/S0924-0136(02)01042-710.1016/S0924-0136(02)01042-7 ↗
24. 10.1243/PIME_PROC_1990_204_047_0210.1243/PIME_PROC_1990_204_047_02 ↗