journal article·2017-04-26

Effect of longitudinal−torsional vibration in ultrasonic-assisted drilling

Saeid Amini, Meysam Soleimani, Hossein Paktinat, Mohammad Lotfi

Publisher page

Abstract

In general, drilling of aeronautical materials is faced with some difficulties. To improve this process, a variety of methods have been presented by researchers. One of these methods is ultrasonic-assisted drilling (UAD). In this study, performance of longitudinal−torsional (L-T) vibration in UAD of Al 7075-T6 with HSS tool is investigated. Accordingly, a vibration tool with ability of producing L-T vibration was designed. After modal analysis and achievement of desired resonance frequency, it was fabricated and some experimental tests were conducted. A dynamometer with six degrees of freedom was utilized to measure torque and thrust force during the cutting process. As a result, it was revealed that this kind of vibration significantly reduces cutting forces compared with the conventional drilling (CD). Furthermore, this reduction was clarified by investigation of generated chips and tool rake angle. Moreover, effect of ultrasonic vibration on drill skidding and surface quality has been studied.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. 10.1016/j.precisioneng.2007.08.00310.1016/j.precisioneng.2007.08.003 ↗
2. 10.1007/s00170-015-7549-510.1007/s00170-015-7549-5 ↗
3. 10.1016/j.jmatprotec.2007.11.27110.1016/j.jmatprotec.2007.11.271 ↗
4. 10.1016/j.rcim.2013.10.00110.1016/j.rcim.2013.10.001 ↗
5. 10.1007/s00170-015-7315-810.1007/s00170-015-7315-8 ↗
6. 10.1016/j.mechatronics.2015.05.00610.1016/j.mechatronics.2015.05.006 ↗
7. 10.4028/www.scientific.net/AMR.445.7910.4028/www.scientific.net/AMR.445.79 ↗
8. Lotfi M. · Part B: Journal of Engineering Manufacture · 2015
9. 10.1007/s00170-014-6676-810.1007/s00170-014-6676-8 ↗
10. 10.4028/www.scientific.net/AMR.423.110.4028/www.scientific.net/AMR.423.1 ↗
11. 10.1016/S0007-8506(07)61472-310.1016/S0007-8506(07)61472-3 ↗
12. 10.1007/s00170-015-7414-610.1007/s00170-015-7414-6 ↗
13. 10.1016/j.ijmachtools.2008.12.01410.1016/j.ijmachtools.2008.12.014 ↗
14. 10.1016/j.ijmachtools.2007.02.00110.1016/j.ijmachtools.2007.02.001 ↗
15. 10.1016/j.ultras.2014.01.00310.1016/j.ultras.2014.01.003 ↗
16. 10.1080/10426914.2012.73665910.1080/10426914.2012.736659 ↗
17. 10.1016/j.jsv.2007.03.08110.1016/j.jsv.2007.03.081 ↗
18. 10.1177/095440541562348510.1177/0954405415623485 ↗
19. 10.1177/095440541559219610.1177/0954405415592196 ↗
20. Ensminger D.10.1201/b11173 ↗
21. 10.1016/j.ijmachtools.2006.10.00710.1016/j.ijmachtools.2006.10.007 ↗
22. Kouam, J., Masounave, J., Songmene, V., Gireadeau, A. Pre-holes effect on cutting forces and particle emission during dry drilling machining. In Proc. of 49th Annual Conference of Metallurgists of CIM 2010 (pp. 253–263)
23. 10.1016/j.jsv.2014.05.04210.1016/j.jsv.2014.05.042 ↗
24. 10.1016/j.rcim.2004.11.00510.1016/j.rcim.2004.11.005 ↗
25. Astashev V.K. · 2007
26. Chou C.L. · 1994
27. 10.4028/www.scientific.net/AMR.325.35110.4028/www.scientific.net/AMR.325.351 ↗
28. Altintas Y. · 201210.1017/CBO9780511843723 ↗