journal article·2012-10

Nanofinishing of Fused Silica Glass Using Ball-End Magnetorheological Finishing Tool

Anant Kumar Singh, Sunil Jha, Pulak M. Pandey

Publisher page

Abstract

The surface finishing of fused silica in nanometer range and in obtaining defect-free surface is a challenge and in high demand because of its applications for transmitting high energy laser pulses. A novel nanofinishing process using ball-end Magnetorheological (MR) finishing tool was developed for finishing of flat as well as three-dimensional (3D) surfaces of ferromagnetic and non-ferromagnetic materials. In this process, a magnetically controlled ball end of smart MR polishing fluid is generated at the tip of the cylindrical tool, and it is guided to follow the surface to be finished through computer controlled three-axes motion. The process is automated and used for finishing precise components in manufacturing system. The smart behavior of MR-polishing fluid is utilized to precisely control the finishing forces which exhibit change in rheological behavior in the presence of external magnetic field. The finishing of fused silica glass was done using cerium oxide Cerox 1663 abrasive powder. The effect of finishing time on final surface roughness was studied, and the finished surfaces were observed under atomic force microscope. Significant improvement in surface roughness (Ra), root mean square (RMS), and Rmax value has been obtained after 90 min of finishing. Ra as low as 0.146 nm was achieved from initial value of 0.74 nm.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Hoshino T. · Journal of Non-Crystalline Solids · 2001 · 283 · 12910.1016/S0022-3093(01)00364-7 ↗
2. Jain V.K. · Materials and Manufacturing Processes · 2007 · 22 · 25610.1080/10426910601134096 ↗
3. Zhong Z.W. · Materials and Manufacturing Processes · 2008 · 23 · 44910.1080/10426910802103486 ↗
4. Kordonski W.I. · International Journal of Modern Physics B · 1996 · 10 · 285710.1142/S0217979296001306 ↗
5. Golini D. · Advanced Materials for Optics and Precision Structures · 1997 · 67 · 251
6. Shorey A.B. · Applied Optics · 2001 · 40 · 2010.1364/AO.40.000020 ↗
7. Kordonski W. · SPIE · 1998 · 3326 · 52710.1117/12.310670 ↗
8. Sidpara A. · Materials and Manufacturing Processes · 2009 · 24 · 146710.1080/10426910903367410 ↗
9. Golini D. · Proc. of SPIE Conference on Optical Manufacturing and Testing · 1999 · 3782 · 8010.1117/12.369174 ↗
10. Kim W.B. · Journal of Manufacturing Science and Engineering · 2004 · 126 · 77210.1115/1.1811113 ↗
11. Cheng H.B. · Journal of Materials Processing Technology · 2009 · 209 · 525410.1016/j.jmatprotec.2009.03.011 ↗
12. Miao C. · Applied Optics · 2010 · 49 · 195110.1364/AO.49.001951 ↗
13. Singh A.K. · Materials and Manufacturing Processes · 2012 · 27 · 38910.1080/10426914.2011.551911 ↗
14. Sidpara A. · International Journal of Advanced Manufacturing Technology · 2011 · 55 · 24310.1007/s00170-010-3032-5 ↗
15. Lambropoulos J.C. · Optics Express · 2010 · 18 · 1971310.1364/OE.18.019713 ↗
16. Cheng H.B. · Journal of Materials Processing Technology · 2009 · 209 · 456310.1016/j.jmatprotec.2008.10.046 ↗
17. Matsumura T. · Transactions of NAMRI/SME · 2005 · 33 · 319
18. Shamoto E. · The Japan Society of Mechanical Engineers News · 2005 · 16 · 2
19. Ohmori H. · The Japan Society of Mechanical Engineers News · 2005 · 16 · 4
20. Arif M. · Int. J. Adv. Manuf. Technol. · 2011 · 53 · 106310.1007/s00170-010-2893-y ↗
21. Singh A.K. · International Journal of Machine Tools and Manufacture · 2011 · 51 · 14210.1016/j.ijmachtools.2010.10.002 ↗