An Experimental and Analytical Study on the Limit Drawing Ratio of Stainless Steel 304 Foils for Microsheet Forming
Source abstract
Abstract
A series of micro-deep drawing experiments were conducted on stainless steel 304 foils with four thicknesses that were heat treated at four different temperatures. Due to heat treatments, a variety of different grain sizes and T/D ratios (the number of grains throughout thickness) were obtained. In this study, the limit drawing rations (LDR) of these foils were obtained; it has also been found that the factors that influence LRD of the foils include, but are not limited to, thickness, grain size, and T/D ratios. Tensile tests were conducted to obtain their mechanical properties that were used for two macroempirical equations to predict the maximum drawing load and LDR. It has been verified that the two equations can be applied to foils that are not thinner than 150 µm for reasonable predictions. However, the size effects are more noticeable and significant for the foils that are less than or equal to 100 µm so that the macroscale empirical equations cannot be applied to them.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. 10.1016/S0007-8506(07)62991-610.1016/S0007-8506(07)62991-6 ↗
2. Vollertsen F. · 2001
3. 10.1115/1.271458210.1115/1.2714582 ↗
4. Vollertsen F. · 2008
5. 10.1115/1.181346810.1115/1.1813468 ↗
6. Chen C.H. · Transactions of the NAMRI/SME · 2008 · 36 · 49
7. 10.1016/j.jmatprotec.2006.11.00310.1016/j.jmatprotec.2006.11.003 ↗
8. Gau , J.T. ; Principe , C. ; Yang , F.C. An experimental study on influence of size effect on springback of micro sheet forming . 2006 ASME International Conference on Manufacturing Science and Engineering ; MSEC2006-21037, October 8–11 , Ypsilanti , MI , 2006 .
9. 10.1016/j.jmatprotec.2007.03.03510.1016/j.jmatprotec.2007.03.035 ↗
10. Chen , C.H. ; Gau , J.T. ; Lee , R.S. Tensile and micro bending stretch bending experiments for studying stainless steel 304 foil for micro sheet forming . Proceeding of 2008 International Manufacturing Science and Engineering Conference ; Evanston , USA , Oct. 7–10 , 2008 .10.1115/MSEC_ICMP2008-72273 ↗
11. 10.1016/S0924-0136(01)00626-410.1016/S0924-0136(01)00626-4 ↗
12. 10.1016/j.jmatprotec.2004.04.26610.1016/j.jmatprotec.2004.04.266 ↗
13. Lee , R.S. ; Chen , C.H. ; Gau , J.T. Effect of thickness to grain size ratio on drawability for micro deep drawing of AISI 304 stainless steel . Proceeding of International Conference on Technology of Plasticity , Gyeongju , Korea , Sep. 7–11 , 2008 .
14. Lee , R.S. ; Chen , C.H. ; Song , Y.F. Investigation of micro sheet metal forming of ball retainer using finite element analysis . Proceeding of the 35th International MATADOR Conference ; Taipei , Taiwan , 2007 ; 101 – 104 .10.1007/978-1-84628-988-0_22 ↗
15. ASM International · 1992 · 9 · 534
16. ASTM Standard E112 .Standard Test Methods for Determining Average Grain Size; ASTM International : West Conshohocken , PA , 2004 ; 10 – 11 .
17. 10.1016/S0924-0136(00)00391-510.1016/S0924-0136(00)00391-5 ↗
18. 10.1016/S0924-0136(02)00415-610.1016/S0924-0136(02)00415-6 ↗
19. Hosford , W.F. ; Caddell , R.M.Metal Forming Mechanics and Metallurgy; Prentice Hall International Inc. : Englewood Cliffs , NJ , 1993 ; 288 – 292 .