journal article·2020-12-09

Electron-beam welding of high-entropy alloy and stainless steel: microstructure and mechanical properties

R. Sokkalingam, P. Mastanaiah, V. Muthupandi, K. Sivaprasad, K. G. Prashanth

Publisher page

Abstract

An autogenously dissimilar Al0.1CoCrFeNi-high entropy alloy/stainless steel (i.e., AISI 304) weld joint was produced by an electron-beam welding technique. The weld metal followed mode A of solidification and resulted in a fully austenitic columnar dendritic microstructure due to rapid cooling and lower chromium equivalent to nickel equivalent (Creq/Nieq) ratio (1.12–1.14). Tensile test sample fractures at the base metal (Al0.1CoCrFeNi-high entropy alloy) and illustrates higher strength (the yield and ultimate strength of 310 ± 10 MPa and 560 ± 15 MPa, respectively) than that of Al0.1CoCrFeNi-high entropy alloy, ensuring the suitability of the electron-beam welding for the Al0.1CoCrFeNi-high entropy alloy/AISI 304 stainless steel joint structures designed with respect to Al0.1CoCrFeNi-HEA properties. The influence of the manufacturing process (electron beam welding) is highlighted in terms of microstructure and mechanical properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Materials Processing Laboratory, Department of Metallurgical and Materials Engineering, National Institute of Technology, Tiruchirappalli, India

Special Fabrication Division, Directorate of Engineering, Defence Research and Development Laboratory, Hyderabad, India

Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Tallinn, Estonia

CBCMT, School of Engineering, Vellore Institute of Technology, Vellore, India

Erich Schmid Institute of Materials Science, Austrian Academy of Sciences, Leoben, Austria

Funding

European Regional Development Fund

References (61)

Show source-provided references
1. 10.1080/21663831.2014.95858610.1080/21663831.2014.958586 ↗
2. 10.1557/jmr.2019.18610.1557/jmr.2019.186 ↗
3. 10.1007/s13239-016-0286-610.1007/s13239-016-0286-6 ↗
4. 10.1016/j.matchemphys.2017.07.03110.1016/j.matchemphys.2017.07.031 ↗
5. 10.1016/j.ultsonch.2017.09.04410.1016/j.ultsonch.2017.09.044 ↗
6. 10.1016/j.intermet.2015.11.00210.1016/j.intermet.2015.11.002 ↗
7. 10.1016/B978-0-12-800251-3.00002-X10.1016/B978-0-12-800251-3.00002-X ↗
8. 10.1002/adem.20030056710.1002/adem.200300567 ↗
9. 10.3390/met909099210.3390/met9090992 ↗
10. 10.1002/mdp2.17510.1002/mdp2.175 ↗
11. 10.1016/j.jmst.2018.11.02310.1016/j.jmst.2018.11.023 ↗
12. 10.1016/j.jallcom.2019.15316310.1016/j.jallcom.2019.153163 ↗
13. 10.1016/j.jmst.2017.07.01310.1016/j.jmst.2017.07.013 ↗
14. 10.1016/j.mfglet.2020.03.00310.1016/j.mfglet.2020.03.003 ↗
15. 10.1016/j.jallcom.2013.11.08410.1016/j.jallcom.2013.11.084 ↗
16. 10.1016/S1003-6326(15)63733-510.1016/S1003-6326(15)63733-5 ↗
17. 10.1038/srep3214610.1038/srep32146 ↗
18. 10.1016/j.jmapro.2018.08.00510.1016/j.jmapro.2018.08.005 ↗
19. 10.1016/j.msea.2018.03.03510.1016/j.msea.2018.03.035 ↗
20. 10.1016/j.msea.2016.09.05010.1016/j.msea.2016.09.050 ↗
21. 10.1016/j.ijpvp.2016.05.00410.1016/j.ijpvp.2016.05.004 ↗
22. 10.1179/13621710110153881110.1179/136217101101538811 ↗
23. Sokkalingam R. · Int. J. Res. Sci. Eng · 2014 · 3 · 316
24. Kou S. · 2003
25. 10.4028/www.scientific.net/KEM.775.44810.4028/www.scientific.net/KEM.775.448 ↗
26. 10.1016/j.msea.2019.13804510.1016/j.msea.2019.138045 ↗
27. 10.1016/j.msea.2017.08.00410.1016/j.msea.2017.08.004 ↗
28. 10.1016/j.matdes.2014.01.02610.1016/j.matdes.2014.01.026 ↗
29. 10.1080/1042691000891301110.1080/10426910008913011 ↗
30. 10.1080/1042691080216054410.1080/10426910802160544 ↗
31. 10.1080/1042691060059938010.1080/10426910600599380 ↗
32. Baeslack I. I. I. · Weld. J. · 1979 · 168 · 58
33. 10.1016/j.scriptamat.2006.08.03510.1016/j.scriptamat.2006.08.035 ↗
34. 10.1080/10426914.2010.54482710.1080/10426914.2010.544827 ↗
35. 10.3390/met911122610.3390/met9111226 ↗
36. 10.1007/s40195-014-0058-y10.1007/s40195-014-0058-y ↗
37. 10.1016/0924-0136(95)02150-710.1016/0924-0136(95)02150-7 ↗
38. 10.1080/1042691000891302910.1080/10426910008913029 ↗
39. 10.1080/10426914.2010.51564310.1080/10426914.2010.515643 ↗
40. 10.1081/AMP-20004184410.1081/AMP-200041844 ↗
41. 10.1016/j.msea.2006.03.09610.1016/j.msea.2006.03.096 ↗
42. 10.1016/j.jmapro.2019.11.00710.1016/j.jmapro.2019.11.007 ↗
43. 10.1080/21663831.2017.129980810.1080/21663831.2017.1299808 ↗
44. 10.3390/e1512533810.3390/e15125338 ↗
45. 10.1134/S106183090612008410.1134/S1061830906120084 ↗
46. Lippold J. C. · 2005
47. 10.1016/j.matdes.2014.04.07510.1016/j.matdes.2014.04.075 ↗
48. 10.1080/10426914.2015.102597010.1080/10426914.2015.1025970 ↗
49. 10.3390/met1001006110.3390/met10010061 ↗
50. 10.1179/174329306X8433710.1179/174329306X84337 ↗
51. 10.1007/s11661-017-4140-810.1007/s11661-017-4140-8 ↗
52. 10.1179/1362171811Y.000000001410.1179/1362171811Y.0000000014 ↗
53. Ottino J. M. · 1989
54. 10.1016/j.jcrysgro.2008.10.02110.1016/j.jcrysgro.2008.10.021 ↗
55. 10.1016/j.jallcom.2011.12.02210.1016/j.jallcom.2011.12.022 ↗
56. 10.1016/j.msea.2013.10.02310.1016/j.msea.2013.10.023 ↗
57. 10.1016/j.jallcom.2014.05.02910.1016/j.jallcom.2014.05.029 ↗
58. 10.1038/am.2015.12910.1038/am.2015.129 ↗
59. 10.1038/s41427-020-0212-010.1038/s41427-020-0212-0 ↗
60. 10.1080/10426914.2019.162826210.1080/10426914.2019.1628262 ↗
61. Prashanth K. G. · Technol · 2016 · 4 · 38