Manufacturing large 2219 Al–Cu alloy rings by a cold rolling process
Source abstract
Abstract
Transition rings made of 2219 Al–Cu alloy for tanks with diameters exceeding 5 m require enhanced performance. However, a coarse-grained structure and residual Al2Cu particles deteriorate the mechanical properties of large 2219 Al–Cu alloy rings. A cold rolling (0–6%) process was performed before solution treatment to improve the mechanical properties of such rings. The results showed that increasing the cold rolling deformation led to a higher dislocation density, yielding finer recrystallized grains after heat treatment; moreover, finer grains led to deeper and longer intergranular cracks, thereby increasing the elongation. Increasing the cold rolling deformation also facilitated the fragmentation of Al2Cu particles and enhanced the degree of supersaturation after solution heat treatment, which increased the driving force required for aging precipitation; the yield strength first increased (0–4%) and then decreased (4–6%) with respect to the variation in the characteristics of the precipitated phases. The radial tensile sample that was 6% cold-rolled may experience brittle fracture, which may lead to a significant decrease in the mean tensile strength and elongation. Overall, using the cold rolling process is feasible, and the 4% cold-rolled sample exhibited the best mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Research Institute of Light Alloy, Central South University, Changsha, China
Central South University, State Key Laboratory of High Performance Complex Manufacturing, Changsha, China
School of Mechanical and Electrical Engineering, Central South University, Changsha, China
References (42)
Show source-provided references
1. 10.1016/S0921-5093(01)01777-410.1016/S0921-5093(01)01777-4 ↗
2. 10.1016/j.jmst.2018.09.00710.1016/j.jmst.2018.09.007 ↗
3. 10.1016/j.msea.2017.11.12410.1016/j.msea.2017.11.124 ↗
4. 10.1080/10426914.2015.112795810.1080/10426914.2015.1127958 ↗
5. 10.1080/10426914.2017.137607110.1080/10426914.2017.1376071 ↗
6. Meyers, M.; Chawla, K.Mechanical Behavior of Materials, 2nd ed. Cambridge University Press: USA, 2009; pp 489–491.
7. 10.1016/j.msea.2014.03.03510.1016/j.msea.2014.03.035 ↗
8. 10.1007/s12540-019-00303-510.1007/s12540-019-00303-5 ↗
9. 10.1080/14786435.2011.61686510.1080/14786435.2011.616865 ↗
10. 10.1080/10426914.2018.142490810.1080/10426914.2018.1424908 ↗
11. 10.1016/j.msea.2011.10.00510.1016/j.msea.2011.10.005 ↗
12. 10.1016/j.actamat.2009.08.00610.1016/j.actamat.2009.08.006 ↗
13. 10.1016/j.msea.2019.05.08810.1016/j.msea.2019.05.088 ↗
14. 10.1016/j.msea.2014.09.02610.1016/j.msea.2014.09.026 ↗
15. 10.1016/j.matchar.2017.10.02610.1016/j.matchar.2017.10.026 ↗
16. 10.1002/pssa.221158010810.1002/pssa.2211580108 ↗
17. 10.1016/j.msea.2012.03.04310.1016/j.msea.2012.03.043 ↗
18. Xu X. J. · T. Nonferr. Metal. Soc. · 2006 · 35 · 395
19. 10.1016/j.scriptamat.2005.09.02810.1016/j.scriptamat.2005.09.028 ↗
20. 10.1080/10426914.2016.125713110.1080/10426914.2016.1257131 ↗
21. Penlington, A. Static Recovery Modeling of Dislocation Density in a Cold Rolled Clad Aluminum Alloy. M.A.Sc. Queen’s University, 2013.
22. 10.1016/j.jma.2013.02.01210.1016/j.jma.2013.02.012 ↗
23. 10.1063/1.480783110.1063/1.4807831 ↗
24. 10.1016/j.msea.2017.06.10610.1016/j.msea.2017.06.106 ↗
25. 10.1016/j.matdes.2012.07.00110.1016/j.matdes.2012.07.001 ↗
26. 10.1016/j.msea.2018.06.06710.1016/j.msea.2018.06.067 ↗
27. 10.1007/s10853-010-4284-z10.1007/s10853-010-4284-z ↗
28. 10.1016/j.matdes.2014.01.07810.1016/j.matdes.2014.01.078 ↗
29. Porter, D. A.; Easterling, K. E.; Sherif, M. Y.Phase Transformations in Metals and Alloys, 3rd ed. Taylor & Francis Group: UK, 2009; pp 55–60.10.1201/9781439883570 ↗
30. 10.1063/1.274767310.1063/1.2747673 ↗
31. Villars P. · 1994
32. Liu Z. Y. · T. Nonferr. Metal. Soc. · 2007 · 17 · 1905
33. 10.1016/s1359-6454(99)00179-210.1016/s1359-6454(99)00179-2 ↗
34. 10.1179/174328005X1435710.1179/174328005X14357 ↗
35. 10.1016/j.actamat.2011.02.03510.1016/j.actamat.2011.02.035 ↗
36. 10.1080/14786435.2013.80527110.1080/14786435.2013.805271 ↗
37. Zhong, Q. P.; Zhao, Z. H.The Study of Fracture; Higher Education Press: Beijing, 2006; pp 7.
38. 10.1016/0001-6160(85)90202-010.1016/0001-6160(85)90202-0 ↗
39. 10.1016/j.msea.2016.05.02610.1016/j.msea.2016.05.026 ↗
40. 10.1081/AMP-12002497610.1081/AMP-120024976 ↗
41. Zhou, M. Z. Research of Relationship between Heat-treatment and Fatigue Property of Aerial 2E12 Aluminum Alloy, PhD, Central South University, 2010.
42. Wang, B. Effect of Grain Size and Residual Stress on Fatigue Properties of 2E12 Aluminum Alloy, M. A. Sc, Central South University, 2014.