journal article·2012-11

Study of Micro-Abrasive Tool-Making by Pulse Plating Using Taguchi Method

Anuj Dabholkar, Murali M. Sundaram

Publisher page

Abstract

Experimental investigation of pulse plating parameters on the extent of incorporation of microdiamond abrasives within metallic binder was performed for a micro-abrasive tool. The Taguchi experimental design has been applied to investigate the optimal combination of process parameters to achieve embedment of nominal amount of abrasives in the nickel bond matrix. Analysis of variance (ANOVA) was performed and signal-to-noise (S/N) ratio was determined to know the level of importance of pulse plating parameters. Based on ANOVA, pH of 5.0 (at room temperature) of the pulse plating bath was found to be significant for best abrasive incorporation. These results were experimentally confirmed at 95% confidence level.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced Machining and Optimization Techniques · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Cincinnati

References (34)

Show source-provided references
1. Ehmann K.F. ; Bourell D. ; Culpepper M.L. ; Hodgson T.J. ; Kurfess T.R. ; Madou M. ; Rajurkar K. ; DeVor R.E. International Assessment of Research and Development in Micromanufacturing. WTEC Panel Report World Technology Evaulation Center Inc.: Baltimore MD 2005 .10.21236/ADA466761 ↗
2. 10.1016/S0007-8506(07)60208-X10.1016/S0007-8506(07)60208-X ↗
3. 10.4028/www.scientific.net/AMR.188.39210.4028/www.scientific.net/AMR.188.392 ↗
4. 10.1016/j.cirp.2011.03.13110.1016/j.cirp.2011.03.131 ↗
5. 10.1016/S0924-0136(01)00941-410.1016/S0924-0136(01)00941-4 ↗
6. Sheikh-Ahmad , J.Y. Machining of Polymer Composites ; Springer : New York , 2008 .
7. 10.4028/www.scientific.net/KEM.404.1110.4028/www.scientific.net/KEM.404.11 ↗
8. 10.1088/0960-1317/12/1/40110.1088/0960-1317/12/1/401 ↗
9. 10.1081/AMP-10010430010.1081/AMP-100104300 ↗
10. 10.1080/1042691090336578610.1080/10426910903365786 ↗
11. 10.1081/AMP-12002995910.1081/AMP-120029959 ↗
12. McGeough , J.A. Micromachining of Engineering Materials ; Marcel Dekker : New York , 2002 .
13. Dabholkar , A. ; Sundaram , M.M. Experimental study of micro abrasive tool making by electroplating . ASME Conference Proceedings 2011 , 44304 , 357 – 362 .
14. 10.1016/S0007-8506(07)62221-510.1016/S0007-8506(07)62221-5 ↗
15. 10.1016/S0925-9635(99)00086-210.1016/S0925-9635(99)00086-2 ↗
16. 10.4028/www.scientific.net/KEM.238-239.25710.4028/www.scientific.net/KEM.238-239.257 ↗
17. 10.4028/www.scientific.net/MSF.471-472.42610.4028/www.scientific.net/MSF.471-472.426 ↗
18. 10.1016/j.jmatprotec.2006.11.06910.1016/j.jmatprotec.2006.11.069 ↗
19. 10.1016/S0925-9635(03)00059-110.1016/S0925-9635(03)00059-1 ↗
20. 10.1016/j.precisioneng.2009.09.00110.1016/j.precisioneng.2009.09.001 ↗
21. Roy , R.K. Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement ; Wiley : New York , 2001.
22. Taguchi , G. ; Yokoyama , Y. Taguchi Methods: Design of Experiments ; ASI Press : New York , 1993 .
23. Taguchi , G. ; Chowdhury , S. ; Wu , Y. Taguchi's Quality Engineering Handbook ; Wiley : New York , 2005 .
24. Ross , P.J. Taguchi Techniques for Quality Engineering, , 2nd Ed. ; McGraw-Hill : New York , 1996 .
25. 10.1081/AMP-12002985210.1081/AMP-120029852 ↗
26. 10.1080/1042691080271439910.1080/10426910802714399 ↗
27. 10.1080/AMP-20006060510.1080/AMP-200060605 ↗
28. 10.1080/1042691090353675810.1080/10426910903536758 ↗
29. 10.1149/1.210068010.1149/1.2100680 ↗
30. 10.1016/S0257-8972(01)01352-410.1016/S0257-8972(01)01352-4 ↗
31. Hamann , C.H. ; Hamnett , A. ; Vielstich , W. Electrochemistry ; Wiley-VCH : New York , 2007 .
32. 10.1016/0022-1902(59)80089-010.1016/0022-1902(59)80089-0 ↗
33. 10.1002/978047060263810.1002/9780470602638 ↗
34. 10.1016/0013-4686(83)80015-210.1016/0013-4686(83)80015-2 ↗