journal article·2013-03

A Novel Semisolid Rheo-Rolling Process of AZ31 Alloy with Vibrating Sloping Plate

Ren-Guo Guan, Zhan-Yong Zhao, Chun-Guang Dai, Chong Soo Lee, Chun-Ming Liu

Publisher page

Abstract

A novel semisolid rheo-rolling process of AZ31 alloy was achieved by combining the shape rolling mill with the vibrating sloping plate device. The process is expected to be developed as a high-speed, semisolid roll-casting technique. During the process, due to the strong cooling rate by the sloping plate and stirrings caused by vibration and metal flow, three mechanisms—heterogenous nucleation, eruptive nucleation, and nucleus multiplication—exist, which lead to fine spherical or rosette grains formation. Two grain-growing styles, direct globular growth, dendrite growth, and fracture happen on the sloping plate surface, which also devotes to the fine non dendrite formation. During the rolling process, the solid grain of the slurry is elongated a little, and its original shape is basically maintained. If the casting temperature is too high, the liquid segregation occurs. At the casting temperature range of 650–690°C, AZ31 alloy strip with a cross section size of 4 × 160 mm was prepared by the proposed process. The product has good quality surface and homogenous microstructure. The mechanical properties of the product are higher than that produced by conventional roll casting.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. 10.1080/10426914.2010.53693610.1080/10426914.2010.536936 ↗
2. 10.1080/1042691100363693610.1080/10426911003636936 ↗
3. 10.1080/10426914.2010.49503110.1080/10426914.2010.495031 ↗
4. 10.1080/1042691090349680510.1080/10426910903496805 ↗
5. 10.1007/BF0266109010.1007/BF02661090 ↗
6. 10.1007/s11661-005-0339-110.1007/s11661-005-0339-1 ↗
7. 10.1016/S0921-5093(00)01373-310.1016/S0921-5093(00)01373-3 ↗
8. Midson S.P. · Die Casting Engineer · 2006 · 50 · 48
9. Yang X.R. · Transactions of Nonferrous Metals Society of China · 2009 · 19 · 869
10. 10.1016/j.jmatprotec.2004.04.01810.1016/j.jmatprotec.2004.04.018 ↗
11. 10.1016/j.actamat.2005.01.00910.1016/j.actamat.2005.01.009 ↗
12. 10.1016/j.jallcom.2010.04.17310.1016/j.jallcom.2010.04.173 ↗
13. Haghayeghi R. · Diffusion and Defect Data Part B (Solid State Phenomena) · 2008 · 141 · 40310.4028/www.scientific.net/SSP.141-143.403 ↗
14. Kaufmann H. · Die Casting Engineer · 2002 · 46 · 16
15. Motegi T. · International Journal of Materials & Product Technology · 2001 · 2 · 468
16. Kapranos P. · Diffusion and Defect Data Part B (Solid State Phenomena) · 2008 · 141 · 11510.4028/www.scientific.net/SSP.141-143.115 ↗
17. Grimmig T. · Diffusion and Defect Data Part B (Solid State Phenomena) · 2006 · 116 · 48410.4028/www.scientific.net/SSP.116-117.484 ↗
18. Babaghorbani P. · Diffusion and Defect Data Part B (Solid State Phenomena) · 2006 · 116 · 20510.4028/www.scientific.net/SSP.116-117.205 ↗
19. 10.4028/www.scientific.net/AMR.97-101.105710.4028/www.scientific.net/AMR.97-101.1057 ↗
20. 10.1016/S1003-6326(09)60353-810.1016/S1003-6326(09)60353-8 ↗
21. Mehrara H. · Diffusion and Defect Data Part B (Solid State Phenomena) · 2008 · 141 · 78510.4028/www.scientific.net/SSP.141-143.785 ↗
22. 10.4028/www.scientific.net/MSF.561-565.86510.4028/www.scientific.net/MSF.561-565.865 ↗
23. Kim K.S. · Journal of the Korean Institute of Metals and Materials · 2000 · 38 · 529
24. 10.1179/174328407X24578810.1179/174328407X245788 ↗
25. 10.1007/s10853-008-2828-210.1007/s10853-008-2828-2 ↗
26. 10.1007/s10853-008-2829-110.1007/s10853-008-2829-1 ↗
27. 10.1179/09506600122500107610.1179/095066001225001076 ↗
28. 10.1016/j.jmatprotec.2008.06.00710.1016/j.jmatprotec.2008.06.007 ↗
29. 10.4028/www.scientific.net/AMR.145.35310.4028/www.scientific.net/AMR.145.353 ↗
30. Tan X.F. · China Mechanical Engineering · 2010 · 21 · 2865
31. 10.1016/j.msea.2010.10.00310.1016/j.msea.2010.10.003 ↗