journal article·2012-08

Explosive Bonding of Refractory Metal Liners

Mark D. Miller, Frank Campo, Edward Troiano, Steve Smith, William S. de Rosset

Publisher page

Abstract

Many of the U.S. Army's gun tubes are currently electrolytically plated with chromium in order to extend their service life. In order to eliminate the hexavalent chromium used in the plating process, the development of explosively bonded refractory metal liners has been carried out. While the ultimate application of this technology is for large caliber cannons, the Bushmaster 25-mm M242 medium caliber cannon has been used as a test bed to save costs. A vendor was selected who could explosively bond refractory metals to a short section of a gun tube. The quality and strength of these bonds have been assessed in several ways. Visual observation of sectioned gun tubes showed good liner adhesion to the gun tube. Shear strength tests have been conducted on several bonded liners. Finally, hot hardness tests have been conducted on three explosively-bonded liners. These tests led to the decision to select Ta-10W as the liner material. The vendor was able to explosively bond a Ta-10W liner to a full-length M242 barrel forging. Several barrels were produced and successfully test fired.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electromagnetic Launch and Propulsion Technology · Energetic Materials and Combustion · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. U.S. Department of Defense, Memorandum by Undersecretary of Defense John J. Young, Jr., on minimizing the use of hexavalent chromium (Cr+6). Washington, D.C., April 8, 2009.10.21236/ADA512950 ↗
2. Johnson , R.N. ; Bailey , J.A. ; Goetz , J.A. Electro-spark deposited coatings for replacement of chrome plating. Pacific Northwest National Laboratory Contract Report ARAET-CR-05002, June 2005.10.21236/ADA434852 ↗
3. McCrea , J.L.;Marcoccia , M.;Limoges , D. Electroformed Nanocrystalline Coatings: An Advanced Alternative to Hard Chromium Electroplating. Subcontract Number: MTI-1418-01 for Research Services between McDermott Technology Inc., Babcock & Wilcox Canada, and Integran Technologies Inc., File No: 9903-DOD-NAN-0013, November 2003.10.21236/ADA637483 ↗
4. Levy , R.A. Investigation of Chemically Vapor Deposited Tantalum for Medium Caliber Gun Barrel Protection. New Jersey Institute of Technology, October 2008.10.21236/ADA512813 ↗
5. Lowey , R.F. Gun Tube Liner Erosion and Wear Protection; TPL-FR-ER31; under contract DAAD19-99-C-0002, TPL, Inc., Albuquerque, NM, May 28, 2002.
6. Montgomery , J.S. Alloy selection of explosively bonded gun tube liners. Army Research Laboratory Technical Report ARL TR-4914, August 2009.
7. 10.1080/1042691060061113610.1080/10426910600611136 ↗
8. de Rosset , W.S. Explosive bonding of Stellite 25. ARL Technical Report ARL TR-3816, June 2006.
9. Brasher , D.G. ; Butler , D.J. Method for Explosive Bonding of Tubular Metal Liners. U.S. Patent No. 7,530,485, May 2009.
10. Cowan G.R. · J. Appl. Phys. · 1063 · 34 · 92810.1063/1.1729565 ↗
11. de Rosset , W.S. ; Snoha , D.J. ; Minnicino , M.A. Strength of an explosively-formed bond. ARL Technical Report ARL-TR-3889, September 2006.10.21236/ADA455905 ↗
12. Hilley , M.E. (Ed.)Residual Stress Measurements by X-ray Diffraction–SAE J784a.Society of Automotive Engineers: Warrendale, PA, 1971.
13. Klug H.P. · 1974
14. Noyan I.C. · 1974