Manufacturing polymer/clay nanocomposites through elongational flow technique
Source abstract
Abstract
A novel processing technique that employs continuous elongational flow to fabricate polymer/clay nanocomposites has been developed and evaluated in this work. A self-made vane mixer has been used to supply the continuous elongational flow, while high-density polyethylene (HDPE) and organic montmorillonite (O-MMT) were used as the polymer matrix and clay, respectively. The morphology of resultant nanocomposites has been carefully revealed and studied by examining wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). Intercalation effect and dispersion of O-MMT layers have been investigated by the morphology study. The results indicate that the elongational flow has a great potential in melt intercalation of O-MMT, and can lead to an orderly O-MMT layers’ distribution. Thermal properties of as-mixed nanocomposites that prepared under elongational flow have been determined by the differential scanning calorimetry (DSC), which demonstrates that the introduction of O-MMT nano-sheets is bad for the crystal of HDPE matrix. The universal tensile test shows how O-MMT layers affect the mechanical properties of nanocomposites, including the tensile strength and elongation at break. The strain–stress relationship reveals that with continually adding O-MMT layers, the tensile strength increases at first, and then decreases. While the elongation at break shows the same trend.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Dielectric materials and actuators · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Engineering Research Center of Novel Equipment for Polymer Processing, Key Laboratory of Polymer Processing Engineering of the Ministry of Education, South China University of Technology, Guangzhou, China
References (53)
Show source-provided references
1. 10.1021/cr050053510.1021/cr0500535 ↗
2. 10.1002/app.4280110.1002/app.42801 ↗
3. 10.1016/j.clay.2014.03.02310.1016/j.clay.2014.03.023 ↗
4. 10.1016/j.mspro.2015.11.02310.1016/j.mspro.2015.11.023 ↗
5. 10.1016/j.apcata.2015.03.03010.1016/j.apcata.2015.03.030 ↗
6. 10.1021/bm201438m10.1021/bm201438m ↗
7. 10.1007/s00710-014-0339-110.1007/s00710-014-0339-1 ↗
8. 10.1002/adv.2147010.1002/adv.21470 ↗
9. 10.1016/j.compscitech.2015.07.01010.1016/j.compscitech.2015.07.010 ↗
10. 10.1016/j.compositesb.2014.12.03010.1016/j.compositesb.2014.12.030 ↗
11. 10.4028/www.scientific.net/AMM.754-755.2410.4028/www.scientific.net/AMM.754-755.24 ↗
12. 10.4028/www.scientific.net/AMM.262.56710.4028/www.scientific.net/AMM.262.567 ↗
13. 10.1002/app.4260010.1002/app.42600 ↗
14. 10.1016/j.jiec.2013.10.02010.1016/j.jiec.2013.10.020 ↗
15. 10.1016/j.memsci.2013.10.03910.1016/j.memsci.2013.10.039 ↗
16. 10.1021/la302509910.1021/la3025099 ↗
17. 10.1021/la203494z10.1021/la203494z ↗
18. 10.1179/174328908X30931210.1179/174328908X309312 ↗
19. 10.1002/adma.1996008010410.1002/adma.19960080104 ↗
20. 10.1021/ma000955210.1021/ma0009552 ↗
21. 10.1021/ma951433310.1021/ma9514333 ↗
22. 10.1021/cm011062710.1021/cm0110627 ↗
23. 10.1002/1521-3927(20000701)21:11<746::AID-MARC746>3.0.CO;2-K10.1002/1521-3927(20000701)21:11<746::AID-MARC746>3.0.CO;2-K ↗
24. 10.1016/S0032-3861(01)00473-610.1016/S0032-3861(01)00473-6 ↗
25. 10.1016/S0032-3861(00)00468-710.1016/S0032-3861(00)00468-7 ↗
26. 10.1016/j.polymdegradstab.2011.05.00510.1016/j.polymdegradstab.2011.05.005 ↗
27. Schön, F.; Thomann, R.; Gronski, W. Eds. Shear controlled morphology of rubber/organoclay nanocomposites and dynamic mechanical analysis.Macromolecular Symposia; Wiley Online Library, 2002.10.1002/masy.200290000 ↗
28. 10.1016/j.polymdegradstab.2011.03.01510.1016/j.polymdegradstab.2011.03.015 ↗
29. 10.1016/j.polymer.2004.09.05310.1016/j.polymer.2004.09.053 ↗
30. 10.1016/j.polymer.2003.07.01010.1016/j.polymer.2003.07.010 ↗
31. 10.1016/j.compositesa.2016.05.02410.1016/j.compositesa.2016.05.024 ↗
32. 10.1016/j.compscitech.2015.03.01910.1016/j.compscitech.2015.03.019 ↗
33. 10.4028/www.scientific.net/AMM.789-790.7510.4028/www.scientific.net/AMM.789-790.75 ↗
34. Scarfato, P.; Incarnato, L.; Di Maio, L.; Dittrich, B.; Niebergall, U.; Böhning, M.; Schartel, B. Eds. Nanostructure and thermal properties of melt compounded PE/clay nanocomposites filled with an organosilylated montmorillonite.Polymer Processing With Resulting Morphology And Properties: feet in the Present and Eyes at the Future: proceedings of the GT70 International Conference; AIP Publishing, 2015.10.1063/1.4937325 ↗
35. Manas-Zloczower, I.Mixing and compounding of polymers: theory and practice, Cincinnati, OH: Carl Hanser Verlag GmbH Co KG: 2012.
36. 10.3139/217.96029910.3139/217.960299 ↗
37. 10.1002/pen.2317610.1002/pen.23176 ↗
38. 10.1002/pen.2054210.1002/pen.20542 ↗
39. Xiaochun Y. · Journal of Applied Polymer Science · 2015 · 132 · 4155110.1002/app.41551 ↗
40. 10.1002/app.3943410.1002/app.39434 ↗
41. 10.1098/rspa.1913.004010.1098/rspa.1913.0040 ↗
42. 10.1016/j.jpowsour.2014.12.10710.1016/j.jpowsour.2014.12.107 ↗
43. 10.1002/adfm.20140298410.1002/adfm.201402984 ↗
44. 10.1016/j.elecom.2016.06.00610.1016/j.elecom.2016.06.006 ↗
45. 10.1016/j.jpowsour.2014.12.09910.1016/j.jpowsour.2014.12.099 ↗
46. 10.1016/S0032-3861(01)00561-410.1016/S0032-3861(01)00561-4 ↗
47. 10.1016/j.eurpolymj.2004.07.00910.1016/j.eurpolymj.2004.07.009 ↗
48. 10.1016/j.polymer.2003.10.05710.1016/j.polymer.2003.10.057 ↗
49. 10.1016/j.compositesb.2014.11.04110.1016/j.compositesb.2014.11.041 ↗
50. 10.1002/app.1263910.1002/app.12639 ↗
51. 10.1002/pen.1108310.1002/pen.11083 ↗
52. 10.1016/j.compscitech.2008.03.01210.1016/j.compscitech.2008.03.012 ↗
53. 10.1016/j.polymer.2005.01.06310.1016/j.polymer.2005.01.063 ↗