journal article·2024-01-25

Experimental studies on automated DC pulsed MIG welding of Monel 400 sheets

P. Narayanasamy, B. K. Parrthipan, T. Ramkumar, N. Sivashanmugam

Publisher page

Abstract

Hot-rolled Monel 400 sheets of 2 mm thickness were effectively welded by the automated DC-pulsed gas metal arc welding (DC-pulsed GMAW) process using ERNiCu-7 (NA60) filler. An L9 array has been used in this work to obtain optimal robotic welding parameters to achieve better weld quality. The weldments was subjected to microstructural examinations using optical microscopy. The chemical compounds and elements of the weldments were determined using X-ray diffraction and energy-dispersive analyses. The microhardness and tensile properties of the weldments were evaluated. The corrosion behavior of the base metal and weldments was estimated in service environments by exposing them to a 3.5% NaCl solution using a potentiodynamic polarization method. The weld zone has the highest microhardness value of 154 HV. Monel 400 weldments have lower joint strength and elongation than the base metal. In addition, weldments have a higher corrosion rate (201.1 mm/yr) than base metal (55.64 mm/yr).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Kamaraj College of Engineering and Technology, Madurai, India

Department of Mechanical Engineering, Dr. Mahalingam College of Engineering and Technology, Pollachi, India

Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli, India

Funding

commercial, or not-for-profit sectors

References (26)

Show source-provided references
1. 10.1080/10426914.2018.153208510.1080/10426914.2018.1532085 ↗
2. 10.1080/10426914.2020.186619110.1080/10426914.2020.1866191 ↗
3. 10.1007/s11837-006-0077-x10.1007/s11837-006-0077-x ↗
4. 10.1016/J.MATPR.2021.06.20610.1016/J.MATPR.2021.06.206 ↗
5. 10.1080/10426914.2017.140171910.1080/10426914.2017.1401719 ↗
6. 10.1080/10426914.2014.91231410.1080/10426914.2014.912314 ↗
7. 10.1016/j.conengprac.2011.07.01510.1016/j.conengprac.2011.07.015 ↗
8. 10.1016/S0924-0136(03)00725-810.1016/S0924-0136(03)00725-8 ↗
9. 10.4028/www.scientific.net/AMR.383-390.469310.4028/www.scientific.net/AMR.383-390.4693 ↗
10. 10.4149/km10.4149/km ↗
11. 10.1177/095440622096078010.1177/0954406220960780 ↗
12. 10.3390/met910108810.3390/met9101088 ↗
13. 10.1007/s12540-013-3027-510.1007/s12540-013-3027-5 ↗
14. 10.1016/j.matlet.2019.02.10810.1016/j.matlet.2019.02.108 ↗
15. 10.1007/s11665-019-04328-010.1007/s11665-019-04328-0 ↗
16. 10.1016/j.jmrt.2020.11.06010.1016/j.jmrt.2020.11.060 ↗
17. 10.1016/j.matpr.2019.12.35310.1016/j.matpr.2019.12.353 ↗
18. 10.1016/j.matpr.2020.01.25010.1016/j.matpr.2020.01.250 ↗
19. 10.1016/j.matpr.2020.09.39510.1016/j.matpr.2020.09.395 ↗
20. 10.1080/10426914.2020.178493410.1080/10426914.2020.1784934 ↗
21. 10.1080/10426914.2021.200152210.1080/10426914.2021.2001522 ↗
22. 10.1016/J.MATLET.2021.13126210.1016/J.MATLET.2021.131262 ↗
23. 10.1016/J.JMAPRO.2018.12.01910.1016/J.JMAPRO.2018.12.019 ↗
24. 10.1016/j.infrared.2018.08.00210.1016/j.infrared.2018.08.002 ↗
25. 10.1179/174328405X6226010.1179/174328405X62260 ↗
26. 10.1016/j.jmatprotec.2017.12.03310.1016/j.jmatprotec.2017.12.033 ↗