Application of the Equi-Potential Lines Method in Upper Bound Estimation of the Extrusion Pressure
Source abstract
Abstract
Abstract Forming pressure plays a key role in extrusion processand widely affects product quality. Therefore, prediction of the optimal pressure is the main objective for effective extrusion process. In this study, the notion of Equi-Potential Lines (EPLs) was applied to pressure estimation in extrusion process for the first time. To implement analogy in the extrusion, the initial billet and square die were considered and two different potentials were assigned to them, and then EPLs were drawn between two shapes that show the minimum work path between the entry and exit cross sections. The drawn EPLs were connected to each other to buildup a 3D-die. In the following, cubic polynomial curve was fitted between the initial and final shapes in the designed die. The constructed curve was the accurate assumption for deformation zone in the extrusion that was later used in a written code and upper bound formulation for pressure estimation. Effectiveness of the proposed method was examined via theory and experiment. From the results, there was noticeable agreement between the theory and experiment. As a result, application of the EPLs methodin upper bound formulation can lead to accurate results from theory. Keywords: EPLsExperimentExtrusion Notes 2 Ra is the area reduction in extrusion process, R is the radius of billet; and L isthe length of square die; and Y is the yield stress of the lead material.,. 1Curve fitting toolbox.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, College of Engineering, University of Tehran
References (18)
Show source-provided references
1. Hoshino S. ; Gunasekera J.S. An upper-bound solution for the extrusion of square section from round bar through converging dies. In Proceedings of the 21st Machine Tool Design Research Conference 97 1980.10.1007/978-1-349-05861-7_14 ↗
2. Kiuchi M. ; Kishi H. ; Ishikawa M. Study on non-symmetric extrusion and drawing. In Proceedings of the 22nd International Machine Tool Design Research Conference 523 1981.10.1007/978-1-349-06281-2_65 ↗
3. 10.1016/0020-7403(94)90081-710.1016/0020-7403(94)90081-7 ↗
4. Nagpal V. ; Altan T. Analysis of the three dimension metal flow in extrusion of shapes with the use of dual stream functions. In NAMRC Conference Pittsburgh May 1975.
5. 10.1016/0020-7357(75)90002-510.1016/0020-7357(75)90002-5 ↗
6. Yang , D.Y. ; Lee , C.H. ; Altan , T. Analysis of three dimensional extrusion sections through curved dies by conformal transformation . International Journal of Mechanical Sciences 1978 , 19 .
7. Yang D.Y. ; Kum M.U. ; Lee C.H. A new approach for generalized three dimensional extrusion of sections from round billets by conformal transformation. In IUTAM Symposium on Metal Forming Plasticity Germany 1979 pp. 204–211.10.1007/978-3-642-81355-9_13 ↗
8. 10.1016/0020-7403(84)90037-710.1016/0020-7403(84)90037-7 ↗
9. 10.1016/S0020-7403(98)00129-510.1016/S0020-7403(98)00129-5 ↗
10. Abrinia K. ; Zare H. A new method of solution for the extrusion of sections with complexities. In Proceedings of the 11th ISME Conference Ferdousi University Mashhad 2003.
11. 10.1016/S0020-7403(02)00003-610.1016/S0020-7403(02)00003-6 ↗
12. 10.1016/S1000-9361(08)60072-210.1016/S1000-9361(08)60072-2 ↗
13. 10.1080/10426914.2012.66789210.1080/10426914.2012.667892 ↗
14. Cai , J. ; Li , F. ; Liu , T. A new approach of preform design based on 3D electrostatic field simulation and geometric transformation . International Journal of Advanced Manufacturing Technology doi: DOI 10.1007/s00170-011-3216-7
15. 10.1016/j.jmatprotec.2008.07.03310.1016/j.jmatprotec.2008.07.033 ↗
16. 10.1016/j.jmatprotec.2003.08.00510.1016/j.jmatprotec.2003.08.005 ↗
17. 10.1016/S0924-0136(03)00082-710.1016/S0924-0136(03)00082-7 ↗
18. 10.1016/j.matdes.2004.11.02610.1016/j.matdes.2004.11.026 ↗