Processing of bioresorbable closed-cell Mg foam for bone implant applications
Source abstract
Abstract
Magnesium is the most promising element as a bioresorbable material in bone repairing applications. Closed-cell Mg-2Zn-2Ca foam was fabricated through melt processing route by using economical biocompatible pure dolomite+MgCO3 as dual-blowing agent with favorable advantages of uniform pore structure, improved mechanical properties and good biocompatibility. In addition, residuals of blowing agent act as biocompatible particles during degradation. Mg-2Zn-2Ca foam was characterized for its physical, mechanical, in vitro degradation properties and microstructure characterization. Mg-2Zn-2Ca foams having relative density 0.41–0.45, average uniform pore size in the range of 0.25–0.75 mm revealed plastic compression strength up-to 50.1 MPa, plateau strength up to 43.2 MPa with 56.3% densification strain and 30 MJ/m3 of energy absorption per unit volume were obtained. Moreover, Mg foam exhibited adequate compressive behavior during in vitro degradation up to 4 weeks in simulated body fluid. Despite higher amount of hydrogen release in initial stage, Mg foam observed stable degradation mechanism after 2 weeks due to formation and deposition of degradation products on cellular surfaces. Based on the processing method and results obtained, Mg-2Zn-2Ca closed-cell foam satisfied the requirement of physical, mechanical and in vitro degradation properties compared to natural bone properties and recommended as cost effective, biocompatible and bone substitution mechanical implant material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Mechanical and Aero-Space Engineering, Institute of Infrastructure Technology Research and Management, Ahmedabad, Gujarat, India
Institute for Plasma Research, Bhat, Gandhinagar, Gujarat, India
Homi Bhabha National Institute (HBNI), Mumbai, India
Funding
Science and Engineering Research Board
References (57)
Show source-provided references
1. 10.1016/j.actbio.2019.04.01210.1016/j.actbio.2019.04.012 ↗
2. 10.1080/10426914.2019.156660910.1080/10426914.2019.1566609 ↗
3. 10.1080/1042691920894740210.1080/10426919208947402 ↗
4. 10.1080/10426914.2011.64869210.1080/10426914.2011.648692 ↗
5. 10.1080/10426914.2018.147676410.1080/10426914.2018.1476764 ↗
6. 10.1016/j.mtla.2020.10079910.1016/j.mtla.2020.100799 ↗
7. 10.1016/j.biomaterials.2005.10.00310.1016/j.biomaterials.2005.10.003 ↗
8. Morgan, E. F.; Bouxsein, M. L., Principle of Bone Biology, third (A division of Harcourt, California, USA: Academic press); 2008; p. 29.10.1016/B978-0-12-373884-4.00024-0 ↗
9. Hart, N.; Nimphius, S.; Rantalainen, T.; Ireland, A. Mechanical Basis of Bone Strength : Influence of Bone Material. J. Musculoskelet. Neuronal. Interact. 2017, 17(3), 114–139.
10. 10.1115/1.402917610.1115/1.4029176 ↗
11. 10.1016/j.jmbbm.2018.07.02210.1016/j.jmbbm.2018.07.022 ↗
12. 10.1016/j.actbio.2017.12.00810.1016/j.actbio.2017.12.008 ↗
13. 10.1016/j.msec.2018.12.12510.1016/j.msec.2018.12.125 ↗
14. 10.1081/AMP-20003053910.1081/AMP-200030539 ↗
15. 10.1080/10426914.2020.177248310.1080/10426914.2020.1772483 ↗
16. 10.1080/10426914.2011.60278710.1080/10426914.2011.602787 ↗
17. 10.1080/10426914.2020.178493310.1080/10426914.2020.1784933 ↗
18. 10.1080/10426914.2020.181954410.1080/10426914.2020.1819544 ↗
19. 10.1080/10426914.2018.151211710.1080/10426914.2018.1512117 ↗
20. 10.1016/S0079-642510.1016/S0079-6425 ↗
21. 10.1080/10426914.2018.145315510.1080/10426914.2018.1453155 ↗
22. 10.1016/j.msec.2011.07.01510.1016/j.msec.2011.07.015 ↗
23. Neu, T. R.; Mukherjee, M.; Banhart, J. Magnesium and Magnesium Alloy Foams. 7th Int. Conf. on Porous Met. and Metallic Foams. 2011, 133–140.
24. 10.1016/j.matdes.2015.10.02110.1016/j.matdes.2015.10.021 ↗
25. 10.1016/j.jallcom.2007.07.09810.1016/j.jallcom.2007.07.098 ↗
26. 10.1016/j.matdes.2012.05.01110.1016/j.matdes.2012.05.011 ↗
27. 10.1080/10426914.2018.153209310.1080/10426914.2018.1532093 ↗
28. 10.1007/s00774-004-0552-910.1007/s00774-004-0552-9 ↗
29. 10.1016/S0271-5317(99)00040-810.1016/S0271-5317(99)00040-8 ↗
30. 10.14670/HH-25.154710.14670/HH-25.1547 ↗
31. 10.1016/j.jmst.2020.02.01710.1016/j.jmst.2020.02.017 ↗
32. 10.1080/10426914.2021.191484610.1080/10426914.2021.1914846 ↗
33. 10.1016/j.matlet.2021.12999810.1016/j.matlet.2021.129998 ↗
34. 10.1080/1042691090274801610.1080/10426910902748016 ↗
35. 10.1080/10426914.2011.55196410.1080/10426914.2011.551964 ↗
36. Makwana D.; Bhingole P. Indian Patent application: 202021047886 2020.
37. 10.4144/rpsj.60.510.4144/rpsj.60.5 ↗
38. 10.1007/s10973-014-4301-610.1007/s10973-014-4301-6 ↗
39. 10.1081/AMP-12003865110.1081/AMP-120038651 ↗
40. 10.1080/10426914.2017.136474710.1080/10426914.2017.1364747 ↗
41. 10.1016/j.biomaterials.2006.01.01710.1016/j.biomaterials.2006.01.017 ↗
42. 10.1016/j.matdes.2011.04.03110.1016/j.matdes.2011.04.031 ↗
43. 10.1016/j.compositesa.2014.08.00110.1016/j.compositesa.2014.08.001 ↗
44. 10.1080/10426914.2011.57786710.1080/10426914.2011.577867 ↗
45. Ashby, M.; Gibson, L. J. Metal Foams: A Design Guide. First (Elsevier: Butterworth-Heinemann). 2000.
46. 10.1016/j.msea.2010.11.03510.1016/j.msea.2010.11.035 ↗
47. 10.1016/j.actamat.2017.03.03910.1016/j.actamat.2017.03.039 ↗
48. 10.1016/j.jallcom.2017.08.26410.1016/j.jallcom.2017.08.264 ↗
49. 10.1080/10426914.2011.55712910.1080/10426914.2011.557129 ↗
50. 10.1016/j.corsci.2021.10927810.1016/j.corsci.2021.109278 ↗
51. 10.1002/maco.20130758810.1002/maco.201307588 ↗
52. 10.1016/j.bioactmat.2020.02.01510.1016/j.bioactmat.2020.02.015 ↗
53. 10.1016/j.msec.2019.11004210.1016/j.msec.2019.110042 ↗
54. 10.1080/02670844.2020.181548510.1080/02670844.2020.1815485 ↗
55. 10.1016/j.jma.2020.11.01310.1016/j.jma.2020.11.013 ↗
56. 10.1016/j.actbio.2011.11.00810.1016/j.actbio.2011.11.008 ↗
57. 10.1016/j.actbio.2010.02.02810.1016/j.actbio.2010.02.028 ↗